Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application.
The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time.
All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers.
As with all of our mixers, Mixer Direct is committed to best in the industry lead times. Please contact our sales engineers if you have any questions on sizing or expedited delivery (812) 202-4047.
- DP1XXXVDA Technical Specifications Size: (260.8 KB)
|Motor Full Amp||13.3A@230V|
|Shaft Diameter (In)||1.000|
|Shaft Length (In)||14|
|Motor Drive||Electric Direct Drive|
|Variable Speed Drive||VFD|
|Shaft Material||316L SS|
|Coupling (In)||5/8 to 1|
|Impeller Geometry||Dispersion Blade|
|Motor Frequency (Hz)||60|