Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application.
The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. There is no need to remove the shaft between runs, just slide out the lock pin and lift the telescoping slide.
All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers.
As with all of our mixers, Mixer Direct is committed to best in the industry lead times. Please contact our sales engineers if you have any questions on sizing or expedited delivery (812) 202-4047.
- DP1XXXADM Technical Specifications Size: (216.18 KB)
|Motor Full Amp||N/A|
|Shaft Diameter (In)||1.000|
|Shaft Length (In)||14|
|Motor Drive||Air Direct Drive|
|Variable Speed Drive||Needle Valve|
|Shaft Material||316L SS|
|Coupling (In)||5/8 to 1|
|Impeller Geometry||Dispersion Blade|
|Motor Frequency (Hz)||No|