Product Description
Powered by a 1/3 HP TEFC electric motor running on 114/230V single phase power. Fitted with two 10-inch stainless steel propellers mounted on a 44 inch long, 3/4" diameter stainless steel shaft. Equipped with a variable frequency drive (VFD) control, this mixer can be run at speeds from 0-233 rpm (in overdrive 0-350rpm). The VFD controller is powered by 120VAC and is mounted at the motor. External control is activated.
Additional Information
| Lead Time | No |
|---|---|
| Motor Horsepower | 0.33 |
| Motor Full Amp | No |
| Shaft Diameter (In) | 0.750 |
| Shaft Length (In) | 44 |
| Mount | Plate |
| Impeller Material | 316SS |
| Impeller Qty | 1 |
| Mixer Size | Large |
| Motor Drive | Electric Gear Drive |
| Variable Speed Drive | VFD |
| Shaft Material | 316L SS |
| Coupling (In) | No |
| Impeller Geometry | 3 Blade Propeller |
| Impeller Hand | Left |
| Impeller Pitch | Square |
| Impeller Diameter | 10.0 |
| Shaft RPM | 0-233 |
| Gear | 7.5:1 Worm |
| Motor Enclosure | TEFC |
| Motor Frequency (Hz) | 60 |
| Motor Speed | 1750 |
