1000+ Gallon Tank Agitators & Mixers

MXD industrial mixers and agitators in this category are designed to be mounted in fixed tanks which handle hundreds to several thousand gallons of product. We provide ANSI flange, plate and top entry mountings and can also supply you with the right tank along with pumps, valves and other accessories. Most of these tank agitators will mount using channels that mount along that top of the tank. Large tank mixers then can then be bolted to the top of the tank, either on center or sightly off center to create low-level self baffling. Browse our agitator mixers below.

Contact Us

Selecting the correct impeller for your application can be crucial to getting the most out of your tank agitator, Mixer Direct can supply up-pumping, high flow, low shear, medium shear, just about any configuration. Call us at (812) 202-4047 or submit your application through our contact form. We'll get you the right tank mixer and impeller for your application.

Need an air motor for your tank mixer? We have them on standard models, something you won't find at many other tank agitator manufacturers. Some of these large tank mixers involve a considerable amount of customization which can be supplied by our expert engineering staff.

Horsepower

Motor Type

Shaft Diameter

Impeller Type

Enclosure Type

Number of Impellers

Raiden Standard 3/4 HP Plate Mount Top Entry Mixer

Raiden Standard 3/4 HP Plate Mount Top Entry Mixer

RDNSTD007P-80 $3,109

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

Raiden Standard 3/4 HP Flange Mount Top Entry Mixer

Raiden Standard 3/4 HP Flange Mount Top Entry Mixer

RDNSTD007F-80 $3,391

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

60 HP Side Entry Mixer 26" Fluid Foil Impeller

60 HP Side Entry Mixer 26" Fluid Foil Impeller

SEM600ES26 $29,911

60 HP Side Entry Mixer Motor: 60 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 407 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 10" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2.5” x 34" Exposed Length, 316SS, Turned Ground and Polished Impeller: 25'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

60 HP Explosion Proof Side Entry Mixer 26" Fluid Foil Impeller

60 HP Explosion Proof Side Entry Mixer 26" Fluid Foil Impeller

SEM600XS26 $36,399

60 HP Side Entry Explosion Proof Mixer Motor: 60 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 407 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 360 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 10" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2.5” x 34" Exposed Length, 316SS, Turned Ground and Polished Impeller: 26'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment