20-1000 Gallon Mixers

Medium sized mixers, also called “portables”, are sized and powered to handle most applications in the industry that process from 30 to 1000 gallons. These mixers are the most flexible and versatile for mid-sized operations. MXD supplies light and heavy duty clamp mounts, drum lid mounted and bung mount mixers, as well as tote bracket mounts. Motors can be electric or air powered, and our electric designs can be specified explosion proof. For clean operations we can provide sealed systems and stainless components.

Contact Us

We have standard designs with a very wide variety of shaft-impeller combinations which can be further customized to almost any configuration. This category of agitator usually goes under the title of "Drum Mixer" for this is their primary use. Many companies have found that mixing in the shipping drum saves in transfer losses and tank investment. MixerDirect's clamp on drum agitator line can attach onto the side of steel drums and can be adjusted to almost angle. When adjusted properly the operator can achieve mixing that simulates a baffled tank. Some companies when requesting drum mixers, need for the drum to remain covered to reduce vapor loss. The drum lid mounted mixer is ideal for that circumstance, with an integrated lid that will fit right on top of your open top drum. Call us for assistance regarding your drum mixing needs (812) 202-4047 or contact us through the website for industrial mixing equipment and we'll get back to you the same day.

Free Resources

Download Catalog

Horsepower

Speed Controller

Motor Type

Shaft Diameter

Impeller Type

Number of Impellers

Impeller Attachment

Phase

electric gear drive heavy duty clamp mount

2 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC200EGD $2,860

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

variable gear drive heavy duty clamp mount

1.5 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC150VGD $3,723

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

explosion proof gear drive heavy duty clamp mount

1.5 HP Explosion Proof Gear Drive Heavy Duty Clamp Mount

HDC150XGD $3,097

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

1.5 HP Electric Gear Drive Plate Mount

1.5 HP Electric Gear Drive Plate Mount

PLT150EGD $2,858

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

Electric gear drive heavy duty clamp mount

1.5 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC150EGD $2,454

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

2 HP Variable Speed Gear Drive Plate Mount

2 HP Variable Speed Gear Drive Plate Mount

PLT200VGD $4,587

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

variable speed gear drive heavy duty clamp mount

2 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC200VGD $4,237

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

2 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

FLG200VGD-S $4,646

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Variable Speed Gear Drive Flange Mount

2 HP Variable Speed Gear Drive Flange Mount

FLG200VGD $4,446

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Electric Gear Drive Plate Mount

2 HP Electric Gear Drive Plate Mount

PLT200EGD $3,252

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

2 HP Electric Gear Drive Flange Mount with Viton Lip Seal

2 HP Electric Gear Drive Flange Mount with Viton Lip Seal

FLG200EGD-S $3,330

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

2 HP Electric Gear Drive Flange Mount

2 HP Electric Gear Drive Flange Mount

FLG200EGD $3,130

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1.5 HP Variable Speed Gear Drive Plate Mount

1.5 HP Variable Speed Gear Drive Plate Mount

PLT150VGD $4,088

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1.5 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

1.5 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

FLG150VGD-S $4,154

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1.5 HP Variable Speed Gear Drive Flange Mount

1.5 HP Variable Speed Gear Drive Flange Mount

FLG150VGD $3,954

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

sanitary tri clamp mixer

1.5 HP Variable Speed Electric Gear Drive Tri-Clamp Mount Mixer

TCM150VGD $3,766

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. This mixer is equipped with a NEMA 4X washdown Variable speed controller allowing precise RPM control. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

pharma grade tri clamp mixer

1.5 HP Variable Speed Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM150VGD-S $6,853

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel Hydrofoil Impellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. This mixer is equipped with a NEMA 4X washdown Variable speed controller allowing precise RPM control. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1.5 HP Explosion Proof Gear Drive Plate Mount

1.5 HP Explosion Proof Gear Drive Plate Mount

PLT150XGD $3,481

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1.5 HP Explosion Proof Gear Drive Flange Mount with Viton Lip Seal

1.5 HP Explosion Proof Gear Drive Flange Mount with Viton Lip Seal

FLG150XGD-S $3,556

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1.5 HP Explosion Proof Gear Drive Flange Mount

1.5 HP Explosion Proof Gear Drive Flange Mount

FLG150XGD $3,356

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

sanitary tri clamp mixer

1.5 HP Electric Gear Drive Tri-Clamp Mount Mixer

TCM150EGD $2,906

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1.5 HP Electric Gear Drive Flange Mount with Viton Lip Seal

1.5 HP Electric Gear Drive Flange Mount with Viton Lip Seal

FLG150EGD-S $2,942

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1.5 HP Electric Gear Drive Flange Mount

1.5 HP Electric Gear Drive Flange Mount

FLG150EGD $2,742

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1.5 HP Air Gear Drive Plate Mount

1.5 HP Air Gear Drive Plate Mount

PLT150AGD $3,059

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

1.5 HP Air Gear Drive Flange Mount

1.5 HP Air Gear Drive Flange Mount

FLG150AGD $2,940

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

sanitary white washdown tri clamp mixer

1-1/2 HP Electric Gear Drive White Washdown Tri-Clamp Mount Mixer

TCM150EGD-W $4,503

The Mixer Direct sanitary tri-clamp mixer line is built for sanitary applications requiring a wash down design. This line is constructed for food, various beverage and pharmaceutical applications, or any application requiring a high degree of cleanability. The sanitary tri-clamp ensures suitability for sanitary requirements that would necessitate a full wash down of the equipment. This white wash down construct protects against most types of chemical, moisture, or humidity related corrosion, and other washdown processes taking place in the vicinity where overspray might occur.

pharma grade tri clamp mixer

1 HP Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM100EGD-S $6,557

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

sanitary white washdown tri clamp mixer

1 1/2 HP Variable Speed Electric Gear Drive White Washdown Tri-Clamp Mount Mixer

TCM150VGD-W $5,363

The Mixer Direct sanitary tri-clamp mixer line is built for sanitary applications requiring a wash down design. This line is constructed for food, various beverage and pharmaceutical applications, or any application requiring a high degree of cleanability. The sanitary tri-clamp ensures suitability for sanitary requirements that would necessitate a full wash down of the equipment. This white wash down construct protects against most types of chemical, moisture, or humidity related corrosion, and other washdown processes taking place in the vicinity where overspray might occur.

sanitary tri clamp mixer

1 1/2 HP Explosion Proof Electric Gear DriveTri-Clamp Mount Mixer

TCM150XGD $3,527

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!