20-1000 Gallon Mixers

Medium sized mixers, also called “portables”, are sized and powered to handle most applications in the industry that process from 30 to 1000 gallons. These mixers are the most flexible and versatile for mid-sized operations. MXD supplies light and heavy duty clamp mounts, drum lid mounted and bung mount mixers, as well as tote bracket mounts. Motors can be electric or air powered, and our electric designs can be specified explosion proof. For clean operations we can provide sealed systems and stainless components.

We have standard designs with a very wide variety of shaft-impeller combinations which can be further customized to almost any configuration. This category of portable agitator usually goes under the title of "Drum Mixer" for this is their primary use. Many companies have found that mixing in the shipping drum saves in transfer losses and tank investment. MixerDirect's clamp on drum agitator line can attach onto the side of steel drums and can be adjusted to almost angle. When adjusted properly the operator can achieve mixing that simulates a baffled tank. Some companies when requesting drum mixers, need for the drum to remain covered to reduce vapor loss. The drum lid mounted mixer is ideal for that circumstance, with an integrated lid that will fit right on top of your open top drum. Call us for assistance regarding your drum mixing needs (812) 202-4047 or contact us through the website for industrial mixing equipment and we'll get back to you the same day.

Free Resources

Download Catalog

Sort By

14 in

Mount

Horsepower

0.75
1
4

Speed Controller

No
Yes

Motor Type

Wetted Material

304SS
316SS

Enclosure Type

Number of Impellers

1
2

Impeller Attachment

Phase

1
3

1 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC100EGD $2,695

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

4 HP Air Gear Drive Tri-Clamp Mount Mixer

TCM400AGD $4,126

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these propeller agitators come equipped with stainless steel blades. A high-performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options for these propeller agitators including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

4 HP Air Gear Drive Heavy Duty Clamp Mount

HDC400AGD $3,168

Download The Heavy Duty Clamp Mount Air Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. Air motor driven mixers include a precision needle valve to control the speed.

1 HP Explosion Proof Gear Drive Heavy Duty Clamp Mount

HDC100XGD $3,248

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

4 HP Air Gear Drive Plate Mount

PLT400AGD $4,514

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

4 HP Air Gear Drive Flange Mount with Viton Lip Seal

FLG400AGD-S $4,974

This line of flange mount mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

4 HP Air Gear Drive Flange Mount

FLG400AGD $4,374

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

1 HP Variable Speed Gear Drive Plate Mount

PLT100VGD $3,756

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC100VGD $3,400

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

FLG100VGD-S $3,786

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Variable Speed Gear Drive Flange Mount

FLG100VGD $3,586

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Top Entry Plate Mount Mixer 5:1 Gearbox 14" High Efficiency Impeller

TPL010350 $2,554

Mixer Direct's Top Entry Mixers handle the largest mixing applications in the industry. This heavy duty mixer comes with a thick plate designed to bolt to the top of a frame or tank. These durable mixers come equipped with low shear dispersion blades capable of mixing high viscosity fluids. The 5:1 gearbox on this industrial mixer features a premium helical drive, a hollow shaft cover, and an oil sight glass. The top entry mixer comes equipped with a 1 HP electric motor and a 14” high efficiency impeller. The top entry mixer comes fitted with a 1" diameter shaft 37.5" long. Our customization options include longer shafts, multiple gear ratios, a range of motor horsepower, and varied impellers to encompass any mixing need. Download the TPL010350 Tech Sheet

1 HP Top Entry Flange Mount Mixer 5:1 Gearbox 14" High Efficiency Impeller

TFL010350 $3,014

Mixer Direct's Top Entry Mixers handle the largest mixing applications in the industry. Designed to bolt to the top of a frame or tank these durable mixers come equipped with low shear dispersion blades capable of mixing high viscosity fluids. The flange mixer's utility lies in its ability to attach to an existing connection. Mixer Direct can customize the flange to adapt to the ANSI flange for your application. The 5:1 gearbox on this industrial mixer features a premium helical drive, a hollow shaft cover, and an oil sight glass. The top entry mixer comes equipped with a 1 HP electric motor and a 14” high efficiency impeller. The 304 stainless steel flange comes with Teflon lip seals for optimal sealing power. The top entry mixer comes fitted with a 1" diameter shaft 37.5" long. Our customization options include longer shafts, multiple gear ratios, a range of motor horsepower, and varied impellers to encompass any mixing need. Download the TPL010350 Tech Sheet

1 HP Explosion Proof Gear Drive Plate Mount

PLT100XGD $3,604

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1 HP Explosion Proof Gear Drive Flange Mount with Viton Lip Seal

FLG100XGD-S $3,281

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1 HP Explosion Proof Gear Drive Flange Mount

FLG100XGD $3,081

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1 HP Electric Gear Drive Flange Mount with Viton Lip Seal

FLG100EGD-S $3,181

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.