20-1000 Gallon Drum Mixers

Medium sized mixers, also called “portables”, are sized and powered to handle most applications in the industry that process from 30 to 1000 gallons. These mixers are the most flexible and versatile for mid-sized operations. MXD supplies light and heavy duty clamp mounts, drum lid mounted and bung mount mixers, as well as tote bracket mounts. Motors can be electric or air powered, and our electric designs can be specified explosion proof. For clean operations we can provide sealed systems and stainless components.

Contact Us

We have standard designs with a very wide variety of shaft-impeller combinations which can be further customized to almost any configuration. This category of portable agitator usually goes under the title of "Drum Mixer" for this is their primary use. Many companies have found that mixing in the shipping drum saves in transfer losses and tank investment. MixerDirect's clamp on drum agitator line can attach onto the side of steel drums and can be adjusted to almost angle. When adjusted properly the operator can achieve mixing that simulates a baffled tank. Some companies when requesting drum mixers, need for the drum to remain covered to reduce vapor loss. The drum lid mounted mixer is ideal for that circumstance, with an integrated lid that will fit right on top of your open top drum. Call us for assistance regarding your drum mixing needs (812) 202-4047 or contact us through the website for industrial mixing equipment and we'll get back to you the same day.

Raiden Standard 2 HP Plate Mount Top Entry Mixer

Raiden Standard 2 HP Plate Mount Top Entry Mixer

RDNSTD020P-80 $3,394

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard steel mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden mixer.  

1/3 HP Electric Direct Drive Plate Mount

1/3 HP Electric Direct Drive Plate Mount

PLT033EDD $1,727

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3/4 HP Air Direct Drive Plate Mount

3/4 HP Air Direct Drive Plate Mount

PLT075ADD $1,887

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

Raiden Standard 3 HP Plate Mount Top Entry Mixer

Raiden Standard 3 HP Plate Mount Top Entry Mixer

RDNSTD030P-90 $4,097

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

3/4 HP Variable Speed Gear Drive Plate Mount

3/4 HP Variable Speed Gear Drive Plate Mount

PLT075VGD $3,495

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

Raiden Standard 1 HP Plate Mount Top Entry Mixer

Raiden Standard 1 HP Plate Mount Top Entry Mixer

RDNSTD010P-80 $3,222

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

3/4 HP Explosion Proof Gear Drive Plate Mount

3/4 HP Explosion Proof Gear Drive Plate Mount

PLT075XGD $3,393

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

3/4 HP Electric Direct Drive Plate Mount

3/4 HP Electric Direct Drive Plate Mount

PLT075EDD $2,083

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Variable Speed Gear Drive Plate Mount

3 HP Variable Speed Gear Drive Plate Mount

PLT300VGD $5,164

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Electric Direct Drive Plate Mount

3 HP Electric Direct Drive Plate Mount

PLT300EDD $2,436

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

2 HP Variable Speed Direct Drive Plate Mount

2 HP Variable Speed Direct Drive Plate Mount

PLT200VDD $3,291

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/3 HP Variable Speed Direct Drive Plate Mount

1/3 HP Variable Speed Direct Drive Plate Mount

PLT033VDD $2,432

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/2 HP Electric Direct Drive Plate Mount

1/2 HP Electric Direct Drive Plate Mount

PLT050EDD $2,005

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1.5 HP Electric Gear Drive Plate Mount

1.5 HP Electric Gear Drive Plate Mount

PLT150EGD $3,145

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1.5 HP Air Direct Drive Plate Mount

1.5 HP Air Direct Drive Plate Mount

PLT150ADD $2,138

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This agitator propeller is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.  The air motor package includes a muffler and a needle control valve.

Raiden Standard 5 HP Plate Mount Top Entry Mixer

Raiden Standard 5 HP Plate Mount Top Entry Mixer

RDNSTD050P-90 $4,338

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

Raiden Standard 1.5 HP Plate Mount Top Entry Mixer

Raiden Standard 1.5 HP Plate Mount Top Entry Mixer

RDNSTD015P-80 $3,316

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

Raiden Standard 3/4 HP Plate Mount Top Entry Mixer

Raiden Standard 3/4 HP Plate Mount Top Entry Mixer

RDNSTD007P-80 $3,109

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

Raiden Standard 1/2 HP Plate Mount Top Entry Mixer

Raiden Standard 1/2 HP Plate Mount Top Entry Mixer

RDNSTD005P-80 $3,050

The Standard line of Raiden mixers establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

4 HP Air Gear Drive Plate Mount

4 HP Air Gear Drive Plate Mount

PLT400AGD $4,547

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

4 HP Air Direct Drive Plate Mount

4 HP Air Direct Drive Plate Mount

PLT400ADD $2,645

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

3/4 HP Variable Speed Direct Drive Plate Mount

3/4 HP Variable Speed Direct Drive Plate Mount

PLT075VDD $2,757

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3/4 HP Explosion Proof Direct Drive Plate Mount

3/4 HP Explosion Proof Direct Drive Plate Mount

PLT075XDD $2,650

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

3/4 HP Electric Gear Drive Plate Mount

3/4 HP Electric Gear Drive Plate Mount

PLT075EGD $2,823

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3/4 HP Air Gear Drive Plate Mount

3/4 HP Air Gear Drive Plate Mount

PLT075AGD $2,717

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

3 HP Variable Speed Direct Drive Plate Mount

3 HP Variable Speed Direct Drive Plate Mount

PLT300VDD $3,414

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Electric Gear Drive Plate Mount

3 HP Electric Gear Drive Plate Mount

PLT300EGD $4,186

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

2 HP Variable Speed Gear Drive Plate Mount

2 HP Variable Speed Gear Drive Plate Mount

PLT200VGD $4,339

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Electric Gear Drive Plate Mount

2 HP Electric Gear Drive Plate Mount

PLT200EGD $3,528

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

2 HP Electric Direct Drive Plate Mount

2 HP Electric Direct Drive Plate Mount

PLT200EDD $2,383

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1/3 HP Variable Speed Gear Drive Plate Mount

1/3 HP Variable Speed Gear Drive Plate Mount

PLT033VGD $3,031

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/3 HP Explosion Proof Gear Drive Plate Mount

1/3 HP Explosion Proof Gear Drive Plate Mount

PLT033XGD $2,846

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1/3 HP Explosion Proof Direct Drive Plate Mount

1/3 HP Explosion Proof Direct Drive Plate Mount

PLT033XDD $2,247

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1/3 HP Electric Gear Drive Plate Mount

1/3 HP Electric Gear Drive Plate Mount

PLT033EGD $2,326

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1/2 HP Variable Speed Gear Drive Plate Mount

1/2 HP Variable Speed Gear Drive Plate Mount

PLT050VGD $3,316

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/2 HP Variable Speed Direct Drive Plate Mount

1/2 HP Variable Speed Direct Drive Plate Mount

PLT050VDD $2,710

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/2 HP Explosion Proof Gear Drive Plate Mount

1/2 HP Explosion Proof Gear Drive Plate Mount

PLT050XGD $3,177

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1/2 HP Explosion Proof Direct Drive Plate Mount

1/2 HP Explosion Proof Direct Drive Plate Mount

PLT050XDD $2,570

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1/2 HP Electric Gear Drive Plate Mount

1/2 HP Electric Gear Drive Plate Mount

PLT050EGD $2,611

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1.5 HP Variable Speed Gear Drive Plate Mount

1.5 HP Variable Speed Gear Drive Plate Mount

PLT150VGD $3,938

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1.5 HP Variable Speed Direct Drive Plate Mount

1.5 HP Variable Speed Direct Drive Plate Mount

PLT150VDD $2,936

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1.5 HP Explosion Proof Gear Drive Plate Mount

1.5 HP Explosion Proof Gear Drive Plate Mount

PLT150XGD $3,719

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1.5 HP Explosion Proof Direct Drive Plate Mount

1.5 HP Explosion Proof Direct Drive Plate Mount

PLT150XDD $2,680

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1.5 HP Electric Direct Drive Plate Mount

1.5 HP Electric Direct Drive Plate Mount

PLT150EDD $2,183

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1.5 HP Air Gear Drive Plate Mount

1.5 HP Air Gear Drive Plate Mount

PLT150AGD $3,123

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

1 HP Variable Speed Gear Drive Plate Mount

1 HP Variable Speed Gear Drive Plate Mount

PLT100VGD $3,769

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Variable Speed Direct Drive Plate Mount

1 HP Variable Speed Direct Drive Plate Mount

PLT100VDD $2,790

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Explosion Proof Gear Drive Plate Mount

1 HP Explosion Proof Gear Drive Plate Mount

PLT100XGD $3,483

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.