3-10 HP Dispersers

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct.  Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done.  For products less than 15,000 cps you can calculate the required horsepower of high shear mixers by dividing your required volume by 10.  For example, a 50 Gal batch would normally require 5 HP disperser machines to disperse.  The dimensions on high shear mixers allow for a 36” lift and a 40” diameter vessel.

The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container.  This is important if you are going to be dispersing products at a variety of viscosities.

Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds.  A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials.  Speeds are controlled by several methods:  

  • Electric dissolvers include a membrane button control w/ an RPM readout
  • Explosion proof dispersers include a local control box w/ Start and Stop functionality and a speed control knob

Customizations and options on these units include container holders, slower or faster speed ranges, and lift heights.  As with all of our mixers, Mixer Direct is committed to best in the industry lead times.  Please contact our sales engineers if you have any questions on sizing or expedited delivery (812) 202-4047 of industrial disperser machines.

Contact Us

Free Resources

Download Catalog
electric high shear disperser

1.5HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1015VDA $2,577

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers. As...

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,497

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

Air Powered Disperser

3/4HP Air Lab Bench Disperser for up to 5 Gal Containers with Manual Lift

DP1008ADM $1,721

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to a 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion mixer blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. There is no need to remove the shaft between runs, just slide out the lock pin and lift the telescoping slide. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

Air Powered Disperser

1.5HP Air Lab Bench Disperser for up to 5 Gal Containers with Manual Lift

DP1015ADM $1,891

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. There is no need to remove the shaft between runs, just slide out the lock pin and lift the telescoping slide. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Electric High Speed Disperser

7.5HP DP3 Electric High Speed Disperser with Air Lift

DP3075VBA $7,667

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Explosion Proof High Shear Disperser

5HP DP3 Explosion Proof High Speed Disperser with Air Lift

DP3050XBA $9,017

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Electric High Speed Disperser

5HP DP3 Electric High Speed Disperser with Air Lift

DP3050VBA $7,080

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. // For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a...

Air Powered Disperser

4HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1040ADA $2,529

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to a 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Air Powered Disperser

3/4HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1008ADA $1,999

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers. As...

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $2,670

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

Electric High Shear Disperser

2HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020VBA $3,830

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Electric High Shear Disperser

10HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

DP4100XBO $14,375

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. // For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out...

explosion proof high shear disperser

1.5HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1015XDA $4,815

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside of...

Air Powered Disperser

1.5HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1015ADA $2,229

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers. As...

Explosion Proof High Shear Disperser

7.5HP DP3 Explosion Proof High Speed Disperser with Air Lift

DP3075XBA $9,942

p>For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Air Powered Disperser

4HP Air Lab Bench Disperser for up to 5 Gal Containers with Manual Lift

DP1040ADM $2,191

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. There is no need to remove the shaft between runs, just slide out the lock pin and lift the telescoping slide. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Air Powered disperser

4HP Air High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2040ABA $3,623

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by the included precision needle valve to meter the air flow to the...

Electric High Shear Disperser

3HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2030VBA $4,340

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Explosion Proof High Shear Disperser

3HP DP3 Explosion Proof High Speed Disperser with Air Lift

DP3030XBA $8,113

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Electric High Speed Disperser

3HP DP3 Electric High Speed Disperser with Air Lift

DP3030VBA $6,689

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products less than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Electric High Shear Disperser

30HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

DP4300XBO $22,443

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are controlled...

Electric High Shear Disperser

30HP DP4 Electric High Speed Disperser with Air over Oil Lift

DP4300VBO $18,382

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products less than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. The unique design of the DP4 allows for 270° of rotation offering mobility and versatility. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the...

explosion proof high shear disperser

2HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1020XDA $5,040

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside of...

Explosion Proof High Shear Disperser

2HP Explosion Proof High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020XBA $5,757

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by a NEMA 7 rated local controller with an On/Off button and a...

25HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

25HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

DP4250XBO $20,771

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are controlled...

Electric High Shear Disperser

25HP DP4 Electric High Speed Disperser with Air over Oil Lift

DP4250VBO $16,724

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products less than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. The unique design of the DP4 allows for 270° of rotation offering mobility and versatility. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the...

Electric High Shear Disperser

20HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

DP4200XBO $18,380

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are controlled...

Electric High Shear Disperser

20HP DP4 Electric High Speed Disperser with Air over Oil Lift

DP4200VBO $15,053

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products less than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. The unique design of the DP4 allows for 270° of rotation offering mobility and versatility. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the...

explosion proof high shear disperser

1HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1010XDA $4,887

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside of the rated...

Explosion Proof High Shear Disperser

1HP Explosion Proof High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2010XBA $5,828

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by a NEMA 7 rated local controller with an On/Off button and a...

Electric High Shear Disperser

1HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2010VBA $3,660

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Electric High Shear Disperser

15HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

DP4150XBO $16,351

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. // For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out...

Electric High Shear Disperser

15HP DP4 Electric High Speed Disperser with Air over Oil Lift

DP4150VBO $13,823

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products less than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. The unique design of the DP4 allows for 270° of rotation offering mobility and versatility. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the...

Electric High Shear Disperser

10HP DP4 Electric High Speed Disperser with Air over Oil Lift

DP4100VBO $12,053

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products less than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. The unique design of the DP4 allows for 270° of rotation offering mobility and versatility. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the...

Explosion Proof High Shear Disperser

10HP DP3 Explosion Proof High Speed Disperser with Air Lift

DP3100XBA $11,090

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Electric High Speed Disperser

10HP DP3 Electric High Speed Disperser with Air Lift

DP3100VBA $9,018

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Explosion Proof High Shear Disperser

1.5HP Explosion Proof High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2015XBA $5,633

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by a NEMA 7 rated local controller with an On/Off button and a...

Electric High Shear Disperser

1.5HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2015VBA $3,740

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Air Powered disperser

1.5HP Air High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2015ABA $3,145

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by the included precision needle valve to meter the air flow to the...