3-10 HP Dispersers

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct.  Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done.  For products less than 15,000 cps you can calculate the required horsepower of high shear mixers by dividing your required volume by 10.  For example, a 50 Gal batch would normally require 5 HP disperser machines to disperse.  The dimensions on high shear mixers allow for a 36” lift and a 40” diameter vessel.

The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container.  This is important if you are going to be dispersing products at a variety of viscosities.

Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds.  A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials.  Speeds are controlled by several methods:  

  • Electric dissolvers include a membrane button control w/ an RPM readout
  • Explosion proof dispersers include a local control box w/ Start and Stop functionality and a speed control knob

Customizations and options on these units include container holders, slower or faster speed ranges, and lift heights.  As with all of our mixers, Mixer Direct is committed to best in the industry lead times.  Please contact our sales engineers if you have any questions on sizing or expedited delivery (812) 202-4047 of industrial disperser machines.

Contact Us

Free Resources

Download Catalog
Air Powered Disperser

3/4HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1008ADA $2,499

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....