3/8" Bore Weld-on Hub

3/8" Bore Weld-on Hub

HUWDBL037-37 $110

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 3/8" and an OD of 1".

3/4" Bore Weld-on Hub

3/4" Bore Weld-on Hub

HUWDBL075-75 $121

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 3/4" and an OD of 1.5".

2.5" Bore Weld-on Hub

2.5" Bore Weld-on Hub

HUWDBL250-250 $296

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 2.5" and an OD of 4.25".

1/2" Bore Weld-on Hub

1/2" Bore Weld-on Hub

HUWDBL075-50 $121

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1/2" and an OD of 1.5".

Stiffening Plates for 8" Blade

Stiffening Plates for 8" Blade

STFDBL008 $274

Stiffening Plates provide strength and durability for large high shear dispersion blades. The fabricated industrial stiffening plates provide support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 4" stiffening plates to sandwich an 8" dispersion blade and can be bored to match any size center hole. Dispersion blade, shaft, and hub as shown in picture are sold separately

Stiffening Plates for 22" Blade

Stiffening Plates for 22" Blade

STFDBL022 $692

Stiffening Plates provide strength and durability for large high shear dispersion blades. The fabricated welded plate stiffener provide support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 11" stiffening plates to sandwich a 22" dispersion blade and can be bored to match any size center hole.

Stiffening Plates for 20" Blade

Stiffening Plates for 20" Blade

STFDBL020 $623

Stiffening Plates provide strength and durability for large high shear dispersion blades. The fabricated metal plate stiffener provide support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 10" stiffening plates to sandwich a 20" dispersion blade and can be bored to match any size center hole. Dispersion blade, hub, and shaft as shown in picture are sold separately

Stiffening Plates for 18" Blade

Stiffening Plates for 18" Blade

STFDBL018 $556

Stiffening Plates provide strength and durability for large high shear dispersion blades. The fabricated support plate provide support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 9" stiffening plates to sandwich a 18" dispersion blade and can be bored to match any size center hole. Dispersion blade, hub, and shaft shown in picture are sold separately

Stiffening Plates for 16" Blade

Stiffening Plates for 16" Blade

STFDBL016 $493

Stiffening Plates provide strength and durability for large high shear dispersion blades. The fabricated steel stiffener provide support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 8" stiffening plates to sandwich a 16" dispersion blade and can be bored to match any size center hole. Dispersion blade, hub, and shaft shown in picture are sold separately

Stiffening Plates for 14" Blade

Stiffening Plates for 14" Blade

STFDBL014 $433

Stiffening Plates provide strength and durability for large high shear dispersion blades. The aftermarket stiffening plates provide support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 7" stiffening plates to sandwich a 14" dispersion blade and can be bored to match any size center hole. Dispersion blade, hub, and shaft as shown in picture are sold separately

Stiffening Plates for 12" Blade

Stiffening Plates for 12" Blade

STFDBL012 $377

Stiffening Plates provide strength and durability for large high shear dispersion blades. The mixer blade re-enforcement provides support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 6" stiffening plates to sandwich a 12" dispersion blade and can be bored to match any size center hole. Dispersion blade, hub, and shaft as shown in picture are sold separately

Stiffening Plates for 10" Blade

Stiffening Plates for 10" Blade

STFDBL010 $324

Stiffening Plates provide strength and durability for large high shear dispersion blades. The mixer blade plating provides support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 5" stiffening plates to sandwich a 10" dispersion blade and can be bored to match any size center hole. Dispersion blade, hub, and shaft as shown in picture are sold separately

Stationary Mount Mixer Stand, Electric Lift

Stationary Mount Mixer Stand, Electric Lift

MXSS80ELE $1,381

Especially designed to increase throughput, the Electric lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The electric lift include a wired remote control to move the mixer into and out of mixing position. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All of the mixer machine stand's non-wear surfaces are powder coated to ensure longevity and corrosion resistance.

Explosion Proof Safety Switch-Container

Explosion Proof Safety Switch-Container

DPXSAFCNT $994

Mixer Direct's line of explosion proof dispersers have many available safety options. The Explosion Proof DP Container Safety Sensor Package shuts off disperser motor when the vessel disengages with Container Holder. The sensor is integrated directly into the VFD to ensure the safety of the operator. The safety package is setup and tested at the factory prior to shipment. Mixer Direct will provide a wiring diagram with shipment of this safety stop switch. The customer is responsible for providing suitable XP wiring onsite.

DP4 Shaft Shroud, 304SS

DP4 Shaft Shroud, 304SS

DP4SHFSHD $447

Mixer Direct's line of dispersers have many available safety options, including this mixer safety cover. The DP4 Safety Shroud bolts over disperser shaft to reduce risk to the operator while running the disperser. The shroud is constructed of 304 stainless steel.

DP3 Shaft Shroud, 304SS

DP3 Shaft Shroud, 304SS

DP3SHFSHD $349

Mixer Direct's line of dispersers have many available safety options, including this mixer machine cover for sale. The DP3 Safety Shroud bolts over disperser shaft to reduce risk to the operator while running the disperser. The shroud is constructed of 304 stainless steel.

DP2 Shaft Shroud, 304SS

DP2 Shaft Shroud, 304SS

DP2SHFSHD $246

Mixer Direct's line of dispersers have many available safety options, including this mixer shaft cover. The DP2 Safety Shroud bolts over disperser shaft to reduce risk to the operator while running the disperser. The shroud is constructed of 304 stainless steel.

5/8" Bore Weld-on Hub

5/8" Bore Weld-on Hub

HUWDBL075-62 $121

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 5/8" and an OD of 1.5".

5/16" Bore Weld-on Hub

5/16" Bore Weld-on Hub

HUWDBL037-31 $110

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 5/16" and an OD of 1".

316SS Shaft, 5/8" Dia, 45" Lg

316SS Shaft, 5/8" Dia, 45" Lg

SHF062045 $122

Precision machined shafting for liquid, shaft based agitators. Machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 3/4" Dia, 54" Lg

316SS Shaft, 3/4" Dia, 54" Lg

SHF075054 $193

Precision machined shafting for liquid, shaft based agitators. This precision ground shafting is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 3/4" Dia, 27" Lg

316SS Shaft, 3/4" Dia, 27" Lg

SHF075027 $97

Precision machined shafting for liquid, shaft based agitators. This polished steel rod is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1" Dia, 69" Lg

316SS Shaft, 1" Dia, 69" Lg

SHF100069 $430

Precision machined shafting for liquid, shaft based agitators. Machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1" Dia, 63" Lg

316SS Shaft, 1" Dia, 63" Lg

SHF100063 $392

Precision machined shafting for liquid, shaft based agitators. This stainless steel round bar is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1" Dia, 42" Lg

316SS Shaft, 1" Dia, 42" Lg

SHF100042 $262

Precision machined shafting for liquid, shaft based agitators. Machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1" Dia, 32" Lg

316SS Shaft, 1" Dia, 32" Lg

SHF100032 $206

Precision machined shafting for liquid, shaft based agitators. This propeller/impeller shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1" Dia, 30" Lg

316SS Shaft, 1" Dia, 30" Lg

SHF100030 $187

Precision machined shafting for liquid, shaft based agitators. This steel liquid mixer rod is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

3" Bore Weld-on Hub

3" Bore Weld-on Hub

HUWDBL300-300 $313

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 3" and an OD of 4.75".

3" Bore Bolt-on Hub

3" Bore Bolt-on Hub

HUBDBL300-300 $382

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 3" bore and a 4.75" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

2.5" Bore Bolt-on Hub

2.5" Bore Bolt-on Hub

HUBDBL250-250 $315

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 2.5" bore and a 4.25" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

2" Bore Weld-on Hub

2" Bore Weld-on Hub

HUWDBL200-200 $250

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 2" and an OD of 3.5".

2" Bore Bolt-on Hub

2" Bore Bolt-on Hub

HUBDBL200-200 $198

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 2" bore and a 3.5" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1.5" Bore Weld-on Hub

1.5" Bore Weld-on Hub

HUWDBL150-150 $204

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1.5" and an OD of 3".

1.25" Bore Weld-on Hub

1.25" Bore Weld-on Hub

HUWDBL150-125 $196

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1.25" and an OD of 3".

1.25" Bore Bolt-on Hub

1.25" Bore Bolt-on Hub

HUBDBL150-125 $177

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1.25" bore and a 3" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1" Bore Weld-on Hub

1" Bore Weld-on Hub

HUWDBL100-100 $136

Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1" and an OD of 2.5".

Accessories

If you need repair parts or just want to upgrade and outfit your mixer yourself, you can find Shafts, Couplers, Motors and other industrial mixer parts here.

Contact Us