Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
1 HP Variable Speed Direct Drive Heavy Duty Clamp Mount

1 HP Variable Speed Direct Drive Heavy Duty Clamp Mount

HDC100VDD-32 $2,952

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1.0 HP IBC Totes Electric Bracket Mount

1.0 HP IBC Totes Electric Bracket Mount

TBM100EDD $2,080

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,997

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

1 HP Electric Direct Drive Sealed Bung Mount Mixer

1 HP Electric Direct Drive Sealed Bung Mount Mixer

BUG100EDD-S-28 $1,449

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Electric Direct Drive Heavy Duty Clamp Mount

1 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC100EDD-32 $2,017

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

1 HP Electric Direct Drive Drum Lid Mount

1 HP Electric Direct Drive Drum Lid Mount

DLM100EDD $1,436

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This lid mounted mixing machine is ideal for use in small batches and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower.

1.0 HP Lightweight Electric Direct Drive IBC Tote Mixer Bracket

1.0 HP Lightweight Electric Direct Drive IBC Tote Mixer Bracket

TBE100EDD $1,679

Download the economy tote bracket electric direct drive mixer tech sheet Designed to mix IBC Totes, the bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. Customization option include longer shafts, gear ratios, and varied impellers.

1 HP Explosion Proof Direct Drive Drum Lid Mount

1 HP Explosion Proof Direct Drive Drum Lid Mount

DLM100XDD $1,989

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. The drum cover mixing machine is ideal for use in small batches and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes an explosion proof motor for rated environments.

1 HP Electric Direct Drive Drum Bracket Mount

1 HP Electric Direct Drive Drum Bracket Mount

DBM100EDD $1,811

Download the drum bracket mount electric direct drive tech sheet Drum Bracket Mixers unique design attaches to any standard metal 55 gallon drum. The drum bracket’s lightweight and sturdy construction allows mixing to be performed in the drum eliminating the need to transfer the product to another container. Mixer Direct’s Drum Bracket’s angled end plate provides a rigid mount to the 55 gallon drum allowing for more vigorous mixing. The electric direct drive allows mixing from low to medium viscosities and comes equipped with (1) 5" Hydrofoil . Mixer Direct offers a unique baffle option to prevent vortexing and improve top to bottom mixing. Our customization options for this electric barrel inserted mixer include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

Sanitary Tri Clamp Mount Mixer

1 HP Explosion Proof Electric Direct Drive Tri-Clamp Mount Mixer

TCM100XDD-24 $2,458

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1.0HP Explosion Proof Direct Drive Tote Bracket Mount

1.0HP Explosion Proof Direct Drive Tote Bracket Mount

TBM100XDD $2,396

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1 HP Electric Gear Drive Heavy Duty Clamp Mount

1 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC100EGD-24 $2,979

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

1 HP Explosion Proof Direct Drive Heavy Duty Clamp Mount

1 HP Explosion Proof Direct Drive Heavy Duty Clamp Mount

HDC100XDD-32 $2,653

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each heavy duty mixer includes a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each direct drive mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

1 HP Explosion Proof Direct Drive Flange Mount

1 HP Explosion Proof Direct Drive Flange Mount

FLG100XDD $2,455

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1 HP Variable Speed Direct Drive Drum Lid Mount

1 HP Variable Speed Direct Drive Drum Lid Mount

DLM100VDD $2,141

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. The barrel lid mixing machine is ideal for use in small batches and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes VFD with Hz readout and membrane touch speed control.

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG100XDD-S-28 $2,002

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The industrial sealed bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.0 HP Variable Speed Direct Drive Lightweight Tote Bracket

1.0 HP Variable Speed Direct Drive Lightweight Tote Bracket

TBE100VDD $3,042

Download the economy tote bracket variable speed drive tech sheet Designed to mix IBC Totes ,the bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. Customization option include longer shafts, gear ratios, and varied impellers.

1 HP Variable Speed Direct Drive Drum Clamp Mount

1 HP Variable Speed Direct Drive Drum Clamp Mount

DCM100VDD $2,105

Download The Drum Clamp Mount Variable Direct Drive. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

sanitary tri clamp mixer

1 HP Explosion Proof Electric Gear DriveTri-Clamp Mount Mixer

TCM100XGD-24 $3,769

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Explosion Proof Gear Drive Heavy Duty Clamp Mount

1 HP Explosion Proof Gear Drive Heavy Duty Clamp Mount

HDC100XGD-24 $3,260

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

1 HP Variable Speed Direct Drive Flange Mount

1 HP Variable Speed Direct Drive Flange Mount

FLG100VDD $2,607

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Explosion Proof Direct Drive Bung Mount

1 HP Explosion Proof Direct Drive Bung Mount

BUG100XDD-28 $1,803

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The explosion proof bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each direct electric barrel mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1.0 HP Variable Speed Direct Drive Drum Bracket Mount

1.0 HP Variable Speed Direct Drive Drum Bracket Mount

DBM100VDD $2,516

Download the drum bracket mount variable direct drive tech sheet Drum Bracket Mixers unique design attaches to any standard metal 55 gallon drum. The drum bracket’s lightweight and sturdy construction allows mixing to be performed in the drum eliminating the need to transfer the product to another container. Mixer Direct’s Drum Bracket’s angled end plate provides a rigid mount to the 55 gallon drum allowing for more vigorous mixing. The electric direct drive allows mixing from low to medium viscosities and comes equipped with (1) 5.5" hydrofoil .The variable speed option allows precise speed control allowing you to get within 1% of your targeted RPM. Mixer Direct offers a unique baffle option to prevent vortexing and improve top to bottom mixing. Our customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1.0 HP Variable Speed Direct Drive Tote Bracket Mount

1.0 HP Variable Speed Direct Drive Tote Bracket Mount

TBM100VDD $3,376

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this variable speed mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Buy a direct drive tote mixer here today!

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

BUG100VDD-S-28 $2,154

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Gear Drive Sealed Bung Mount

1 HP Explosion Proof Gear Drive Sealed Bung Mount

BUG100XGD-S-28 $2,770

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. This overhead bung mixer is rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Electric Gear Drive Drum Bracket Mount

1 HP Electric Gear Drive Drum Bracket Mount

DBM100EGD $2,827

Drum Bracket Mixers unique design attaches to any standard metal 55 gallon drum. The drum mixer with bracket mount's lightweight and sturdy construction allows mixing to be performed in the drum eliminating the need to transfer the product to another container. Mixer Direct’s Drum Bracket’s angled end plate provides a rigid mount to the 55 gallon drum allowing for more vigorous mixing. The electric gear drive have a 7.5:1 worm gear reduction which provides the torque to mix medium to high viscosities and comes equipped with (1) 10" Axial flow turbine . Mixer Direct offers a unique baffle option to prevent vortexing and improve top to bottom mixing. Our customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Electric Direct Drive Clamp Mount

1 HP Electric Direct Drive Clamp Mount

DCM100EDD $1,400

Download The Electric Direct Drive Tech Sheet This bung inserted mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

sanitary tri clamp mixer

1 HP Electric Gear Drive Tri-Clamp Mount Mixer

TCM100EGD-24 $3,164

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

Raiden Standard 1 HP Plate Mount Top Entry Mixer

Raiden Standard 1 HP Plate Mount Top Entry Mixer

RDNSTD010P-80 $3,222

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

350 Gal SS Tote & Mixer System (2500cps)

350 Gal SS Tote & Mixer System (2500cps)

SYS4TST00350-2500 $5,056

Unlike any other tote and mixing system in the industry, our custom tote is designed to facilitate your mixing process. With the offset manway, you have optimal access to your process fluids and allow for excellent placement of your mixing system. By combining craftsmanship with standardized specifications, we are able to offer this one-of-a-kind system with fast lead times to get your operation started.

1 HP Variable Speed Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1 HP Variable Speed Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM100VGD-S $7,694

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel hydrofoil impellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids.This mixer is equipped with a NEMA 4X washdown Variable speed controller allowing precise RPM control. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1 HP Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM100EGD-S $6,899

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

pharma tri clamp mixer

1.5 HP Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM150EGD-S $6,328

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Electric Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1 HP Electric Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM100EDD-S $3,821

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Variable Speed Electric Gear Drive Tri-Clamp Mount Mixer

1 HP Variable Speed Electric Gear Drive Tri-Clamp Mount Mixer

TCM100VGD-24 $4,198

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. This mixer is equipped with a NEMA 4X washdown Variable speed controller allowing precise RPM control. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Variable Speed Electric Direct Drive Tri-Clamp Mount Mixer

1 HP Variable Speed Electric Direct Drive Tri-Clamp Mount Mixer

TCM100VDD-24 $2,927

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment.. This mixer is equipped with a NEMA 4X washdown Variable speed controller. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

1 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC100VGD-24 $3,900

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Explosion Proof Direct Drive Plate Mount

1 HP Explosion Proof Direct Drive Plate Mount

PLT100XDD $2,558

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1 HP Electric Direct Drive Plate Mount

1 HP Electric Direct Drive Plate Mount

PLT100EDD $2,005

The Plate Mount direct drive mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This 1 HP electric mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Learn more about this electric tank mixer on the right.

1 HP Variable Speed Gear Drive Flange Mount

1 HP Variable Speed Gear Drive Flange Mount

FLG100VGD $3,586

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Explosion Proof Gear Drive Flange Mount

1 HP Explosion Proof Gear Drive Flange Mount

FLG100XGD $3,114

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1 HP Electric Gear Drive Flange Mount

1 HP Electric Gear Drive Flange Mount

FLG100EGD $2,914

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1 HP Electric Direct Drive Flange Mount

1 HP Electric Direct Drive Flange Mount

FLG100EDD $1,902

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1 HP Variable Speed Gear Drive Drum Lid Mount

1 HP Variable Speed Gear Drive Drum Lid Mount

DLM100VGD $3,921

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This barrel industrial stirring machine is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes VFD with Hz readout and membrane touch speed control.

1 HP Explosion Proof Gear Drive Drum Lid Mount

1 HP Explosion Proof Gear Drive Drum Lid Mount

DLM100XGD $3,769

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This industrial explosion proof mixer is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes an explosion proof motor for rated environments.

1 HP Electric Gear Drive Drum Lid Mount

1 HP Electric Gear Drive Drum Lid Mount

DLM100EGD $3,216

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This industrial stirring machine for barrels is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A hydrofoil impeller is included with the mixer, providing a significant amount of flow per horsepower.

1 HP Variable Speed Gear Drive Bung Mount

1 HP Variable Speed Gear Drive Bung Mount

BUG100VGD-28 $2,824

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.