Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
Electric High Shear Disperser

10HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

DP4100XBO $14,375

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. // For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out...

10HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

10HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3100XBA $17,190

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

10HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

10HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3100VBA $15,118

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

10HP Dual Shaft Disperser With 50 Gallon Vessel

10HP Dual Shaft Disperser With 50 Gallon Vessel

DS0050ASAANS $36,729

Standard Features: Airlift with pendant controls (50 gals or less). Lift and vessel safety limit switches. 304SS interchangeable mix vessel with flat bottom, fork truck channels, and casters. 304SS lid with dust seal. Vessel locating and locking retaining bracket. All interior welds of the twin shaft disperser vessel are ground smooth for cleanability. The twin shaft disperser has independent motor, drive, and control systems for low and high speed. Sight glass in lid. Optional Features: Vacuum. Internal pressure Jacket for heating and cooling. Insulation Temperature probe. Pressure sensors. Batch Sensors. Explosion proof. Food grade finishes. Complete batch control system. Increased clearance to the floor. 316SS wetted. Full customization available.

Explosion Proof High Shear Disperser

10HP DP3 Explosion Proof High Speed Disperser with Air Lift

DP3100XBA $12,590

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

10 HP Explosion Proof Side Entry Mixer 18" Fluid Foil Impeller

10 HP Explosion Proof Side Entry Mixer 18" Fluid Foil Impeller

SEM100XS18 $11,288

10 HP Explosion Proof Side Entry Mixer Motor: 10 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 394 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 210 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2” x 30" Exposed Length, 316SS, Turned Ground and Polished Impeller: 18'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

10 HP Side Entry Mixer 18" Fluid Foil Impeller

10 HP Side Entry Mixer 18" Fluid Foil Impeller

SEM100ES18 $9,729

10 HP Side Entry Mixer Motor: 10 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 394 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2” x 30" Exposed Length, 316SS, Turned Ground and Polished Impeller: 18'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

Electric High Shear Disperser

10HP DP4 Electric High Speed Disperser with Air over Oil Lift

DP4100VBO $12,553

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products less than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. The unique design of the DP4 allows for 270° of rotation offering mobility and versatility. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the...

Electric High Speed Disperser

10HP DP3 Electric High Speed Disperser with Air Lift

DP3100VBA $10,518

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

10 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

10 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS100FX-90 $13,214

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 10 HP Raiden Plus Flange Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 10 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

10 HP Raiden Plus Top Entry Flange Mount Mixer

10 HP Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS100F-90 $12,377

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 10 HP Raiden Plus Flange Mount Mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 10 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

10 HP Explosion Proof Raiden Plus Top Entry Plate Mount Mixer

10 HP Explosion Proof Raiden Plus Top Entry Plate Mount Mixer

RDNPLUS100PX-90 $12,596

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 10 HP Raiden Plus Plate Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 10 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

10 HP Raiden Plus Top Entry Plate Mount Mixer

10 HP Raiden Plus Top Entry Plate Mount Mixer

RDNPLUS100P-90 $11,759

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 10 HP Raiden Plus Plate Mount Mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 10 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.