Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
Electric High Speed Disperser

7.5HP DP3 Electric High Speed Disperser with Air Lift

DP3075VBA $8,667

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

7.5 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

7.5 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS075FX-90 $12,615

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 7.5 HP Raiden Plus Flange Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 7.5 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

Explosion Proof High Shear Disperser

7.5HP DP3 Explosion Proof High Speed Disperser with Air Lift

DP3075XBA $10,942

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

7.5 HP Side Entry Mixer 17" Fluid Foil Impeller

7.5 HP Side Entry Mixer 17" Fluid Foil Impeller

SEM075ES17 $9,431

7.5 HP Side Entry Mixer Motor: 7.5 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 395 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2” x 30" Exposed Length, 316SS, Turned Ground and Polished Impeller: 17'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

7.5 HP ShearPro Inline Rotor Stator Stainless Steel

7.5 HP ShearPro Inline Rotor Stator Stainless Steel

SP1005008S $19,986

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: 2" Triclamp Inlet / 1.5" Triclamp Outlet  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Seals: (O-rings): TES (PTFE encapsulated Silicone). Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM 
M = Hastelloy C4 
G = 316 Stainless Steel  

7.5 HP ShearPro Inline Rotor Stator Explosion Proof

7.5 HP ShearPro Inline Rotor Stator Explosion Proof

SP1005008X $14,669

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: 2" Triclamp Inlet / 1.5" Triclamp Outlet  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Seals: (O-rings): TES (PTFE encapsulated Silicone). Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM 
M = Hastelloy C4 
G = 316 Stainless Steel  

7.5 HP ShearPro Inline Rotor Stator

7.5 HP ShearPro Inline Rotor Stator

SP1005008 $13,581

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: 2" Triclamp Inlet / 1.5" Triclamp Outlet  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Seals: (O-rings): TES (PTFE encapsulated Silicone). Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM 
M = Hastelloy C4 
G = 316 Stainless Steel  

7.5 HP Explosion Proof Side Entry Mixer 17" Fluid Foil Impeller

7.5 HP Explosion Proof Side Entry Mixer 17" Fluid Foil Impeller

SEM075XS17 $10,734

7.5 HP Side Entry Mixer Motor: 7-1/2 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 395 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 210 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2” x 30" Exposed Length, 316SS, Turned Ground and Polished Impeller: 17'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

7.5 HP Explosion Proof Raiden Plus Top Entry Plate Mount Mixer

7.5 HP Explosion Proof Raiden Plus Top Entry Plate Mount Mixer

RDNPLUS075PX-90 $11,833

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 7.5 HP Raiden Plus Plate Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 7.5 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

7.5 HP Raiden Plus Top Entry Flange Mount Mixer

7.5 HP Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS075F-90 $11,744

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 7.5 HP Raiden Plus Flange Mount Mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 7.5 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

7.5 HP Raiden Plus Top Entry Plate Mount Mixer

7.5 HP Raiden Plus Top Entry Plate Mount Mixer

RDNPLUS075P-90 $10,962

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 7.5 HP Raiden Plus Plate Mount Mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 7.5 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.