Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
11 inch hydrofoil impeller with 3/4 inch bore

High Efficiency Impeller, 11in Dia, 3/4in Bore

HEI011075 $353

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

1/2 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

1/2 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC050VGD-24 $3,157

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

Axial Flow Turbine, 11" Diameter, 3/4" Bore

Axial Flow Turbine, 11" Diameter, 3/4" Bore

AFTL11075 $345

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

Propeller, LH, SP, 11in Dia, 3/4in Bore

Propeller, LH, SP, 11in Dia, 3/4in Bore

PRPS11075 $302

The 3 bladed stainless steep pitch impeller allows for additional flow out of the the same diameter propeller as compare to the Square pitch line. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise.

11 inch axial flow turbine with 1 1/4 inch bore

Axial Flow Turbine, 11" Diameter, 1 1/4" Bore

AFTL11125 $345

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

Axial Flow Turbine RBW, 11" Diameter, 1" Bore

Axial Flow Turbine RBW, 11" Diameter, 1" Bore

AFTS11100 $250

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

11 inch propeller with 1 1/4 inch bore

3 Blade Propeller, LH, Sq, 11" Dia, 1 1/4" Bore

PRPL11125 $291

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

11 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 11" Dia, 1" Bore

PRPL11100 $291

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

11 inch hydrofoil impeller with 1 inch bore

High Efficiency Impeller, 11in Dia, 1in Bore

HEI011100 $353

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

11 inch radial flow turbine with 3/4 inch bore

Radial Flow Turbine, 11" Diameter, 3/4" Bore

RFTL11075 $345

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

1/2 HP Electric Gear Drive Heavy Duty Clamp Mount

1/2 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC050EGD-24 $2,298

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

Axial Flow Turbine RBW, 11" Diameter, 1 1/4" Bore

Axial Flow Turbine RBW, 11" Diameter, 1 1/4" Bore

AFTS11125 $250

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

11 inch radial flow turbine with 1 inch bore

Radial Flow Turbine, 11" Diameter, 1" Bore

RFTL11100 $345

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

11 inch radial flow turbine with 5/8 inch bore

Radial Flow Turbine, 11" Diameter, 5/8" Bore

RFTL11062 $345

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

11 inch hydrofoil impeller with 1 1/2 inch bore

High Efficiency Impeller, 11in Dia, 1 1/2in Bore

HEI011150 $353

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

Propeller, LH, SP, 11in Dia, 1in Bore

Propeller, LH, SP, 11in Dia, 1in Bore

PRPS11100 $302

The 3 bladed stainless steep pitch impeller allows for additional flow out of the the same diameter propeller as compare to the Square pitch line. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise.

1/2 HP Variable Speed Gear Drive Flange Mount

1/2 HP Variable Speed Gear Drive Flange Mount

FLG050VGD $3,139

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/2 HP Explosion Proof Gear Drive Flange Mount

1/2 HP Explosion Proof Gear Drive Flange Mount

FLG050XGD $2,953

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1/2 HP Electric Gear Drive Flange Mount

1/2 HP Electric Gear Drive Flange Mount

FLG050EGD $2,434

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1/2 HP Variable Speed Gear Drive Drum Lid Mount

1/2 HP Variable Speed Gear Drive Drum Lid Mount

DLM050VGD $3,567

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This variable speed industrial mixer is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes VFD with Hz readout and membrane touch speed control.

1/2 HP Explosion Proof Gear Drive Drum Lid Mount

1/2 HP Explosion Proof Gear Drive Drum Lid Mount

DLM050XGD $3,380

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This high-grade 1/2-HP gear drive drum mixer is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes an explosion proof motor for rated environments.

1/2 HP Electric Gear Drive Drum Lid Mount

1/2 HP Electric Gear Drive Drum Lid Mount

DLM050EGD $2,862

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. Ideal for use in viscous batchs and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A hydrofoil impeller is included with the mixer, providing a significant amount of flow per horsepower.

11 inch axial flow turbine with 1 inch bore

Axial Flow Turbine, 11" Diameter, 1" Bore

AFTL11100 $345

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

11 inch axial flow turbine with 5/8 inch bore

Axial Flow Turbine, 11" Diameter, 5/8" Bore

AFTL11062 $345

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

1/2 HP Variable Speed Gear Drive Plate Mount

1/2 HP Variable Speed Gear Drive Plate Mount

PLT050VGD $3,443

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/2 HP Explosion Proof Gear Drive Plate Mount

1/2 HP Explosion Proof Gear Drive Plate Mount

PLT050XGD $3,256

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1/2 HP Electric Gear Drive Plate Mount

1/2 HP Electric Gear Drive Plate Mount

PLT050EGD $2,738

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

Axial Flow Turbine RBW, 11" Diameter, 3/4" Bore

Axial Flow Turbine RBW, 11" Diameter, 3/4" Bore

AFTS11075 $250

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

Axial Flow Turbine RBW, 11" Diameter, 5/8" Bore

Axial Flow Turbine RBW, 11" Diameter, 5/8" Bore

AFTS11062 $250

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

11 inch radial flow turbine with 1 1/4 inch bore

Radial Flow Turbine, 11" Diameter, 1 1/4" Bore

RFTL11125 $345

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

11 inch hydrofoil impeller with 1 1/4 inch bore

High Efficiency Impeller, 11in Dia, 1 1/4in Bore

HEI011125 $353

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

11 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 11" Dia, 3/4" Bore

PRPL11075 $291

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

Propeller, LH, SP, 11in Dia, 1 1/4in Bore

Propeller, LH, SP, 11in Dia, 1 1/4in Bore

PRPS11125 $302

The 3 bladed stainless steep pitch impeller allows for additional flow out of the the same diameter propeller as compare to the Square pitch line. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise.

1/2 HP Electric Gear Drive Flange Mount with Viton Lip Seal

1/2 HP Electric Gear Drive Flange Mount with Viton Lip Seal

FLG050EGD-S $2,634

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1/2 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

1/2 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

FLG050VGD-S $3,339

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/2 HP Electric Gear Drive Stainless Steel Clamp Mount Mixer

1/2 HP Electric Gear Drive Stainless Steel Clamp Mount Mixer

SSC050EGD-24 $4,602

The Stainless Steel Clamp mount mixer. With clean lines, lightweight portability, and intelligent design, the Stainless Steel Clamp mount mixer is an excellent choice for your food and pharmaceutical applications as well as your harsh chemical environment applications. This mixer line features adjustable vertical movement and a fixed Tri-Post 15° offset mount for ideal mixing performance. This unique Tri-Post mount feature creates the perfect offset to ensure your mixer benefits from the natural baffling effect of properly placed portable agitation. The Tri-Post mount can be clamped onto any vertical surface or can be mounted to a dedicated mixing stand. The Mixer Direct stainless steel mixing stand is highlighted below.