Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
14 inch folding impeller with 1 inch bore

Folding Impeller, 14in Dia, 1in Bore

FLP014100 $375

Mixer Direct’s line of large folding impellers allow you to get the stirring power of a large impeller through a 6” NPT opening, like that of a IBC tote. All stainless construction ensures durability and cleanability. The blades fold down due to gravity and open up as the mixer is activated.

14 inch folding impeller with 5/8 inch bore

Folding Impeller, 14in Dia, 5/8in Bore

FLP014062 $375

Mixer Direct’s line of large folding impellers allow you to get the stirring power of a large impeller through a 6” NPT opening, like that of a IBC tote. All stainless construction ensures durability and cleanability. The blades fold down due to gravity and open up as the mixer is activated.

14 inch high flow dispersion blade 5/8 inch bore

High Flow Dispersion Blade, 14in Dia, 5/8in CH

HFD140062 $320

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Most Dispersion blades have issues realted to sufficient fluid motion to get a batch to complete uniformity. Mixer Direct addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher viscosity applications. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

1.5 HP Electric Gear Drive Tote Bracket Mount

1.5 HP Electric Gear Drive Tote Bracket Mount

TBM150EGD $3,288

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

4 HP Air Gear Drive Lightweight Tote Bracket

4 HP Air Gear Drive Lightweight Tote Bracket

TBE400AGD $2,982

Download the economy tote bracket air gear drive mixer tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1.5 HP Electric Gear Drive Lightweight Tote Bracket

1.5 HP Electric Gear Drive Lightweight Tote Bracket

TBE150EGD $2,626

Download the economy tote bracket electric gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1.5 HP Air Gear Heavy-Duty Tote Bracket Mount

1.5 HP Air Gear Heavy-Duty Tote Bracket Mount

TBM150AGD $3,254

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

14 inch folding impeller with 3/4 inch bore

Folding Impeller, 14in Dia, 3/4in Bore

FLP014075 $375

Mixer Direct’s line of large folding impellers allow you to get the stirring power of a large impeller through a 6” NPT opening, like that of a IBC tote. All stainless construction ensures durability and cleanability. The blades fold down due to gravity and open up as the mixer is activated.

4 HP Air Gear Drive Tote Bracket Mount

4 HP Air Gear Drive Tote Bracket Mount

TBM400AGD $3,738

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

4 HP Air Gear Drive Heavy Duty Clamp Mount

4 HP Air Gear Drive Heavy Duty Clamp Mount

HDC400AGD-24 $3,297

Download The Heavy Duty Clamp Mount Air Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. Air motor driven mixers include a precision needle valve to control the speed.

14 inch hydrofoil impeller with 1 inch bore

High Efficiency Impeller, 14in Dia, 1in Bore

HEI014100 $394

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

14 inch axial flow turbine with 1 inch bore

Axial Flow Turbine, 14" Diameter, 1" Bore

AFTL14100 $419

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

14 inch axial flow turbine with 5/8 inch bore

Axial Flow Turbine, 14" Diameter, 5/8" Bore

AFTL14062 $419

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

14 inch hydrofoil impeller with 1 1/4 inch bore

High Efficiency Impeller, 14in Dia, 1 1/4in Bore

HEI014125 $394

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

14 inch dispersion blade with 5/8 inch bore

Dispersion Blade, 14in Dia, 5/8in CH

DBL140062 $162

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

14 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 14" Dia, 3/4" Bore

PRPL14075 $576

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

sanitary tri clamp mixer

4 HP Air Gear Drive Tri-Clamp Mount Mixer

TCM400AGD-24 $4,319

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these propeller agitators come equipped with stainless steel blades. A high-performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options for these propeller agitators including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Electric Gear Drive Heavy Duty Clamp Mount

1 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC100EGD-24 $2,979

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

4 HP Air Gear Drive Drum Lid Mount

4 HP Air Gear Drive Drum Lid Mount

DLM400AGD $3,337

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This 55-gallon drum stirrer is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A hydrofoil impeller is included with the mixer, providing a significant amount of flow per horsepower.

14 inch hydrofoil impeller with 1 1/2 inch bore

High Efficiency Impeller, 14in Dia, 1 1/2in Bore

HEI014150 $394

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

14 inch propeller with 1 1/2 inch bore

3 Blade Propeller, LH, Sq, 14" Dia, 1 1/2" Bore

PRPL14150 $576

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

14 inch propeller with 1 1/4 inch bore

3 Blade Propeller, LH, Sq, 14" Dia, 1 1/4" Bore

PRPL14125 $576

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

TBM150VGD $4,588

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

TBM150XGD $3,777

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

Propeller, LH, SP, 14in Dia, 1 1/2in Bore

Propeller, LH, SP, 14in Dia, 1 1/2in Bore

PRPS14150 $543

The 3 bladed stainless steep pitch impeller allows for additional flow out of the the same diameter propeller as compare to the Square pitch line. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise.

14 inch axial flow turbine with 1 1/4 inch bore

Axial Flow Turbine, 14" Diameter, 1 1/4" Bore

AFTL14125 $419

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

1 HP Explosion Proof Gear Drive Heavy Duty Clamp Mount

1 HP Explosion Proof Gear Drive Heavy Duty Clamp Mount

HDC100XGD-24 $3,260

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

14 inch axial flow turbine with 3/4 inch bore

Axial Flow Turbine, 14" Diameter, 3/4" Bore

AFTL14075 $419

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

Axial Flow Turbine RBW, 14" Diameter, 1" Bore

Axial Flow Turbine RBW, 14" Diameter, 1" Bore

AFTS14100 $320

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

Axial Flow Turbine RBW, 14" Diameter, 3/4" Bore

Axial Flow Turbine RBW, 14" Diameter, 3/4" Bore

AFTS14075 $320

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

14 inch radial flow turbine with 1 inch bore

Radial Flow Turbine, 14" Diameter, 1" Bore

RFTL14100 $419

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

14 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 14" Dia, 1" Bore

PRPL14100 $576

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

Ultra Shear Dispersion Blade, 14in Dia, 5/8in CH

Ultra Shear Dispersion Blade, 14in Dia, 5/8in CH

USB140062 $178

Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear Blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

1.5 HP Variable Speed Gear Drive Lightweight Tote Bracket

1.5 HP Variable Speed Gear Drive Lightweight Tote Bracket

TBE150VGD $4,128

Download the economy tote bracket variable gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

1 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC100VGD-24 $3,900

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Variable Speed Gear Drive Flange Mount

1 HP Variable Speed Gear Drive Flange Mount

FLG100VGD $3,586

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Explosion Proof Gear Drive Flange Mount

1 HP Explosion Proof Gear Drive Flange Mount

FLG100XGD $3,114

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1 HP Electric Gear Drive Flange Mount

1 HP Electric Gear Drive Flange Mount

FLG100EGD $2,914

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

4 HP Air Gear Drive Flange Mount

4 HP Air Gear Drive Flange Mount

FLG400AGD $4,407

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

1 HP Variable Speed Gear Drive Drum Lid Mount

1 HP Variable Speed Gear Drive Drum Lid Mount

DLM100VGD $3,921

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This barrel industrial stirring machine is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes VFD with Hz readout and membrane touch speed control.

1 HP Explosion Proof Gear Drive Drum Lid Mount

1 HP Explosion Proof Gear Drive Drum Lid Mount

DLM100XGD $3,769

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This industrial explosion proof mixer is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes an explosion proof motor for rated environments.

1 HP Electric Gear Drive Drum Lid Mount

1 HP Electric Gear Drive Drum Lid Mount

DLM100EGD $3,216

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. This industrial stirring machine for barrels is ideal for use in viscous batches and where some geared down power is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A hydrofoil impeller is included with the mixer, providing a significant amount of flow per horsepower.

1 HP Variable Speed Gear Drive Plate Mount

1 HP Variable Speed Gear Drive Plate Mount

PLT100VGD $3,789

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1 HP Explosion Proof Gear Drive Plate Mount

1 HP Explosion Proof Gear Drive Plate Mount

PLT100XGD $3,637

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

1 HP Electric Gear Drive Plate Mount

1 HP Electric Gear Drive Plate Mount

PLT100EGD $3,084

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

4 HP Air Gear Drive Plate Mount

4 HP Air Gear Drive Plate Mount

PLT400AGD $4,547

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

Axial Flow Turbine RBW, 14" Diameter, 1 1/4" Bore

Axial Flow Turbine RBW, 14" Diameter, 1 1/4" Bore

AFTS14125 $320

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

Axial Flow Turbine RBW, 14" Diameter, 5/8" Bore

Axial Flow Turbine RBW, 14" Diameter, 5/8" Bore

AFTS14062 $320

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.