Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
18 inch dispersion blade with 5/8 inch bore

Dispersion Blade, 18in Dia, 5/8in CH

DBL180062 $202

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

Ultra Shear Dispersion Blade, 18in Dia, 5/8in CH

Ultra Shear Dispersion Blade, 18in Dia, 5/8in CH

USB180062 $223

Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear Blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

18 inch hydrofoil impeller with 1 inch bore

High Efficiency Impeller, 18in Dia, 1in Bore

HEI018100K $450

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

18 inch axial flow turbine with 1 1/2 inch bore

Axial Flow Turbine, 18" Diameter, 1 1/2" Bore

AFTL18150K $527

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

18 inch high flow dispersion blade with 5/8 inch bore

High Flow Dispersion Blade, 18in Dia, 5/8in CH

HFD180062 $395

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Most Dispersion blades have issues realted to sufficient fluid motion to get a batch to complete uniformity. Mixer Direct addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher viscosity applications. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

18 inch hydrofoil impeller with 1 1/2 inch bore

High Efficiency Impeller, 18in Dia, 1 1/2in Bore

HEI018150K $450

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

Axial Flow Turbine RBW, 18" Diameter, 1 1/2" Bore

Axial Flow Turbine RBW, 18" Diameter, 1 1/2" Bore

AFTS18150K $400

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

Axial Flow Turbine RBW, 18" Diameter, 1" Bore

Axial Flow Turbine RBW, 18" Diameter, 1" Bore

AFTS18100K $400

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

18 inch hydrofoil impeller with 1 1/4 inch bore

High Efficiency Impeller, 18in Dia, 1 1/4in Bore

HEI018125K $450

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

3 HP Variable Speed Gear Drive Plate Mount

3 HP Variable Speed Gear Drive Plate Mount

PLT300VGD $5,095

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

18 inch propeller with 1 1/2 inch bore

3 Blade Propeller, LH, Sq, 18" Dia, 1 1/2" Bore

PRPL18150 $1,175

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

18 inch propeller with 1 1/4 inch bore

3 Blade Propeller, LH, Sq, 18" Dia, 1 1/4" Bore

PRPL18125 $1,178

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

350 Gal SS Tote & Mixer System (2500cps)

350 Gal SS Tote & Mixer System (2500cps)

SYS4TST00350-2500 $5,056

Unlike any other tote and mixing system in the industry, our custom tote is designed to facilitate your mixing process. With the offset manway, you have optimal access to your process fluids and allow for excellent placement of your mixing system. By combining craftsmanship with standardized specifications, we are able to offer this one-of-a-kind system with fast lead times to get your operation started.

350 Gal SS Tote & Mixer System (1000cps)

350 Gal SS Tote & Mixer System (1000cps)

SYS4TST00350-1000 $4,858

Unlike any other tote and mixing system in the industry, our custom tote is designed to facilitate your mixing process. With the offset manway, you have optimal access to your process fluids and allow for excellent placement of your mixing system. By combining craftsmanship with standardized specifications, we are able to offer this one-of-a-kind system with fast lead times to get your operation started.

3 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

3 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC300VGD-44 $5,498

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer includes a lower support bearing which takes the radial shaft load off of the motor/gearbox extending its longevity. Outstanding adjustability allows shaft positioning on two axes of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw-attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. The VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Electric Gear Drive Heavy Duty Clamp Mount

3 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC300EGD-44 $4,412

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

3 HP Variable Speed Gear Drive Flange Mount

3 HP Variable Speed Gear Drive Flange Mount

FLG300VGD $4,961

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Electric Gear Drive Flange Mount

3 HP Electric Gear Drive Flange Mount

FLG300EGD $3,983

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

18 inch axial flow turbine with 1 1/4 inch bore

Axial Flow Turbine, 18" Diameter, 1 1/4" Bore

AFTL18125K $527

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

18 inch axial flow turbine with 1 inch bore

Axial Flow Turbine, 18" Diameter, 1" Bore

AFTL18100K $527

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

3 HP Electric Gear Drive Plate Mount

3 HP Electric Gear Drive Plate Mount

PLT300EGD $4,117

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

Axial Flow Turbine RBW, 18" Diameter, 1 1/4" Bore

Axial Flow Turbine RBW, 18" Diameter, 1 1/4" Bore

AFTS18125K $400

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

18 inch radial flow turbine with 1 1/2 inch bore

Radial Flow Turbine, 18" Diameter, 1 1/2" Bore

RFTL18150K $527

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

18 inch radial flow turbine with 1 1/4 inch bore

Radial Flow Turbine, 18" Diameter, 1 1/4" Bore

RFTL18125K $527

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

18 inch radial flow turbine with 1 inch bore

Radial Flow Turbine, 18" Diameter, 1" Bore

RFTL18100K $527

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

18 inch propeller with 2 inch bore

3 Blade Propeller, LH, Sq, 18" Dia, 2" Bore

PRPL18200 $1,175

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 HP Electric Gear Drive Flange Mount with Viton Lip Seal

3 HP Electric Gear Drive Flange Mount with Viton Lip Seal

FLG300EGD-S $4,383

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

3 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

FLG300VGD-S $5,161

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

10 HP Explosion Proof Side Entry Mixer 18" Fluid Foil Impeller

10 HP Explosion Proof Side Entry Mixer 18" Fluid Foil Impeller

SEM100XS18 $11,288

10 HP Explosion Proof Side Entry Mixer Motor: 10 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 394 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 210 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2” x 30" Exposed Length, 316SS, Turned Ground and Polished Impeller: 18'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

10 HP Side Entry Mixer 18" Fluid Foil Impeller

10 HP Side Entry Mixer 18" Fluid Foil Impeller

SEM100ES18 $9,729

10 HP Side Entry Mixer Motor: 10 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 394 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2” x 30" Exposed Length, 316SS, Turned Ground and Polished Impeller: 18'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment