Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
24 inch hydrofoil impeller with 2 inch bore

High Efficiency Impeller, 24in Dia, 2in Bore

HEI024200WK6 $534

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

24 inch hydrofoil impeller with 1 1/2 inch bore

High Efficiency Impeller, 24in Dia, 1 1/2in Bore

HEI024150WK6 $534

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

24 inch axial flow turbine with 1 1/4 inch bore

Axial Flow Turbine, 24" Diameter, 1 1/4" Bore

AFTL24125WK $736

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

Axial Flow Turbine RBW, 24" Diameter, 1 1/2" Bore

Axial Flow Turbine RBW, 24" Diameter, 1 1/2" Bore

AFTS24150WK $525

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

Axial Flow Turbine RBW, 24" Diameter, 1 1/4" Bore

Axial Flow Turbine RBW, 24" Diameter, 1 1/4" Bore

AFTS24125WK $525

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

Axial Flow Turbine RBW, 24" Diameter, 1" Bore

Axial Flow Turbine RBW, 24" Diameter, 1" Bore

AFTS24100WK $525

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

24 inch dispersion blade with 5/8 inch bore

Dispersion Blade, 24in Dia, 5/8in CH

DBL240062 $266

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the dispersion mixer blade and moves outward to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, these dispersion mixers are now being used in a variety of industries for increased efficiency.

24 inch axial flow turbine with 1 /34 inch bore

Axial Flow Turbine, 24" Diameter, 1 3/4" Bore

AFTL24175WK $736

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

24 inch axial flow turbine with 1 1/2 inch bore

Axial Flow Turbine, 24" Diameter, 1 1/2" Bore

AFTL24150WK $736

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

24 inch axial flow turbine with 1 inch bore

Axial Flow Turbine, 24" Diameter, 1" Bore

AFTL24100WK $736

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy.

Axial Flow Turbine RBW, 24" Diameter, 1 3/4" Bore

Axial Flow Turbine RBW, 24" Diameter, 1 3/4" Bore

AFTS24175WK $525

The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. This impeller has a reduced blade width (RBW)design to drop the power requirements at the same diameter.

24 inch radial flow turbine with 1 3/4 inch bore

Radial Flow Turbine, 24" Diameter, 1 3/4" Bore

RFTL24175WK $736

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

24 inch radial flow turbine with 1 1/2 inch bore

Radial Flow Turbine, 24" Diameter, 1 1/2" Bore

RFTL24150WK $736

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

24 inch radial flow turbine with 1 1/4 inch bore

Radial Flow Turbine, 24" Diameter, 1 1/4" Bore

RFTL24125WK $736

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

24 inch radial flow turbine with 1 inch bore

Radial Flow Turbine, 24" Diameter, 1" Bore

RFTL24100WK $736

The Radial flow turbine crates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.

24 inch high flow dispersion blade with 5/8 inch bore

High Flow Dispersion Blade, 24in Dia, 5/8in CH

HFD240062 $493

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Most Dispersion blades have issues related to sufficient fluid motion to get a batch to complete uniformity. Mixer Direct addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher viscosity applications. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

24 inch hydrofoil impeller with 2.5 inch bore

High Efficiency Impeller, 24in Dia, 2.5in Bore

HEI024250WK6 $534

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.They are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

Ultra Shear Dispersion Blade, 24in Dia, 5/8in CH

Ultra Shear Dispersion Blade, 24in Dia, 5/8in CH

USB240062 $292

Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear Blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

Raiden Standard 1/2 HP Flange Mount Top Entry Mixer

Raiden Standard 1/2 HP Flange Mount Top Entry Mixer

RDNSTD005F-80 $3,356

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

Raiden Standard 1/2 HP Plate Mount Top Entry Mixer

Raiden Standard 1/2 HP Plate Mount Top Entry Mixer

RDNSTD005P-80 $3,050

The Standard line of Raiden mixers establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

40 HP Explosion Proof Side Entry Mixer 24" Fluid Foil Impeller

40 HP Explosion Proof Side Entry Mixer 24" Fluid Foil Impeller

SEM400XS24 $29,596

40 HP Explosion Proof Side Entry Mixer Motor: 40 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 407 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 320 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 10" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2.5” x 34" Exposed Length, 316SS, Turned Ground and Polished Impeller: 24'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

40 HP Side Entry Mixer 24" Fluid Foil Impeller

40 HP Side Entry Mixer 24" Fluid Foil Impeller

SEM400ES24 $21,933

40 HP Side Entry Mixer Motor: 40 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 407 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 10" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2.5” x 34" Exposed Length, 316SS, Turned Ground and Polished Impeller: 24'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment