Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
3.5" Axial Flow Turbine w/ 3/8" Bore

3.5" Axial Flow Turbine w/ 3/8" Bore

LIMA35375 $60

316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 3.5" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

3.5 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 3.5" Dia, 5/8" Bore

PRPL035062 $79

The 3-bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, these axial turbine blades will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction. Contact us to learn more about our axial turbines.

3.5 inch propeller with half inch bore

3 Blade Propeller, LH, Sq, 3.5" Dia, 1/2" Bore

PRPL035050 $79

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s turbine type propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

Propeller, RH, Sq, 3.5" Dia, 5/8" Bore

Propeller, RH, Sq, 3.5" Dia, 5/8" Bore

PRPR035062 $87

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being right handed, they will pump in a upward direction when rotating clockwise. This can be ideal for some products with high settling rate or sensitive to air impartation. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3.5 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 3.5" Dia, 3/4" Bore

PRPL035075 $79

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propeller mixers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3.5" Folding Lab Impeller with 5/16" x 16" Shaft

3.5" Folding Lab Impeller with 5/16" x 16" Shaft

LIMF35313 $94

Designed to fit into beakers and flasks with narrow necks, Mixer Direct's Folding Lab Impeller is the perfect impeller for your laboratory. In the folded position these impellers have a diameter of less than 5/8" allowing them to fit inside your 24/40 joints. When rotated centrifugal force raises the impellers which open with an outside diameter of 3.5" and create radial flow. Made from corrosion resistant 316SS these impellers give you the mixing you require in those narrow necked laboratory vessels.

General-Purpose Rotor Stator, 3.5 in Dia

General-Purpose Rotor Stator, 3.5 in Dia

$1,826

The General-purpose stator works well in a variety of applications. The product is drawn from under the rotor stator and forced through large holes in the stator, working best to break down soft solids and generate a high flow. 

Emulser Rotor Stator, 3.5 in Dia

Emulser Rotor Stator, 3.5 in Dia

RSSTATOR035EMS6 $1,728

The Emulser stator works best for creating fine emulsions or suspensions in lower viscosity mixtures. Emulser stators break down ingredients with small holes or a fine mesh, creating an ultra-high shear environment.

Angle Slot Rotor Stator, 3.5 in Dia

Angle Slot Rotor Stator, 3.5 in Dia

RSSTATOR035ASS6 $1,768

The Angle Slot stator is the best combination of high shear and adequate flow. It comes standard on our Post Mount Rotor Stators, and is rated for up to 10,000cps viscosity. As the rotor spins and forces the mixture through the stator, the angled vertical slots shred through solids and powders to create suspensions and homoginzation. 

5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3050XBA $14,517

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

5HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

5HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3050VBA $12,580

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

Propeller, RH, Sq, 3.5" Dia, 3/4" Bore

Propeller, RH, Sq, 3.5" Dia, 3/4" Bore

PRPR035075 $87

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being right handed, they will pump in a upward direction when rotating clockwise. This can be ideal for some products with high settling rate or sensitive to air impartation. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.