Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
3" Axial Flow Turbine w/ 3/8" Bore

3" Axial Flow Turbine w/ 3/8" Bore

LIMA30375 $54

316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller type agitator allows a mixer to the break up agglomeration and impart solids effectively. These impeller type agitators will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 3" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

3 inch propeller with 3/8 inch bore

3 Blade Propeller, LH, Sq, 3" Dia, 3/8" Bore

PRPL03037 $73

The three bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, these three blade propellers will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3" Lab Propeller w/ 3/8" Bore

3" Lab Propeller w/ 3/8" Bore

LIMP30375 $43

316L Stainless Steel Propeller. Low shear, high top to bottom pumping capacity.

3" Radial Flow Lab Impeller w/ 3/8" Bore

3" Radial Flow Lab Impeller w/ 3/8" Bore

LIMR30375 $54

The Radial flow turbine creates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.Mixer Direct's Lab Radial Flow Turbine features a 3" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

3" Lab Hydrofoil w/ 3/8" Bore

3" Lab Hydrofoil w/ 3/8" Bore

LIMH30375 $43

316L Stainless Steel. High pumping per horsepower. Low shear.

Ultra Shear Dispersion Blade, 3in Dia, 1/4in CH

Ultra Shear Dispersion Blade, 3in Dia, 1/4in CH

USB030025 $73

Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear Blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

Ultra Shear Dispersion Blade, 1in Dia, 1/4in CH

Ultra Shear Dispersion Blade, 1in Dia, 1/4in CH

USB010025 $75

Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear Blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

3" Lab Hydrofoil w/ 5/16" Bore

3" Lab Hydrofoil w/ 5/16" Bore

LIMH30313 $43

316L stainless steel mixing hydrofoil. High pumping per horsepower. Low shear.

3 inch high flow dispersion blade with 3/8 inch bore

High Flow Dispersion Blade, 3in Dia, 3/8in CH

HFD030037 $94

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Most Dispersion blades have issues realted to sufficient fluid motion to get a batch to complete uniformity. Mixer Direct addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher visocosity applications. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

3 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 3" Dia, 5/8" Bore

PRPL03062 $73

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propeller type agitators are solid 316L for maximum corrosion resistance in most environments. Being left handed, these 3 blade propeller type agitators will pump in a downward direction when rotating clockwise. Almost every process industry utilizes propeller agitators in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 inch propeller with half inch bore

3 Blade Propeller, LH, Sq, 3" Dia, 1/2" Bore

PRPL03050 $73

The 3-bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s 3-inch propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, this 3-inch propeller will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

Propeller, RH, Sq, 3" Dia, 3/8" Bore

Propeller, RH, Sq, 3" Dia, 3/8" Bore

PRPR03037 $82

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being right handed, they will pump in a upward direction when rotating clockwise. This can be ideal for some products with high settling rate or sensitive to air impartation. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

Ultra Shear Dispersion Blade, 3in Dia, 3/8in CH

Ultra Shear Dispersion Blade, 3in Dia, 3/8in CH

USB030037 $73

Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear Blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

3" Lab Propeller w/ 5/16" Bore

3" Lab Propeller w/ 5/16" Bore

LIMP30313 $43

316L Stainless Steel. This lab agitator blade has a low shear, high top to bottom pumping capacity.

3 inch dispersion blade with 1/4 inch bore

Dispersion Blade, 3in Dia, 1/4in CH

DBL030025 $67

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

3 inch dispersion blade with 3/8 inch bore

Dispersion Blade, 3in Dia, 3/8in CH

DBL030037 $67

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

3 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 3" Dia, 3/4" Bore

PRPL03075 $73

The 3-bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s mixer propeller blades are solid 316L for maximum corrosion resistance in most environments. Being left handed, these mixer propeller blades will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,368

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

Propeller, LH, SP, 3in Dia, 5/8in Bore

Propeller, LH, SP, 3in Dia, 5/8in Bore

PRPS03062 $79

The 3 bladed stainless steep pitch impeller allows for additional flow out of the same diameter propeller as compare to the Square pitch line. Mixer Direct’s left hand propellers are solid 316L for maximum corrosion resistance in most environments. Being left hand propellers, they will pump in a downward direction when rotating clockwise.

Propeller, RH, Sq, 3" Dia, 5/8" Bore

Propeller, RH, Sq, 3" Dia, 5/8" Bore

PRPR03062 $82

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being right handed, they will pump in a upward direction when rotating clockwise. This can be ideal for some products with high settling rate or sensitive to air impartation. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

Propeller, RH, Sq, 3" Dia, 1/2" Bore

Propeller, RH, Sq, 3" Dia, 1/2" Bore

PRPR03050 $82

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s stainless steel propellers are solid 316L for maximum corrosion resistance in most environments. Being right hand propellers, they will pump in a upward direction when rotating clockwise. This can be ideal for some products with high settling rate or sensitive to air impartation. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 inch hydrofoil impeller with 5/8 inch bore

High Efficiency Impeller, 3in Dia, 5/8in Bore

HEI003062 $241

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line.These stainless-steel impellers are used in a variety of applications from general blending to storage tanks.A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

electric high shear disperser

1.5HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1015VDA $3,270

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

3 inch hydrofoil impeller with 1/2 inch bore

High Efficiency Impeller, 3in Dia, 1/2in Bore

HEI003050 $241

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line. These 3-blade impellers are used in a variety of applications from general blending to storage tanks. A low cost alternative to propellers in the larger sizes our 3-blade impellers are popular on the flange mount, plate mount and top entry lines.

Electric High Shear Disperser

2HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020VBA $3,830

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Propeller, LH, SP, 3in Dia, 1/2in Bore

Propeller, LH, SP, 3in Dia, 1/2in Bore

PRPS03050 $79

The 3 bladed stainless steep pitch impeller allows for additional flow out of the the same diameter propeller as compare to the Square pitch line. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise.

3" Folding Lab Impeller with 5/16" x 16" Shaft

3" Folding Lab Impeller with 5/16" x 16" Shaft

LIMF30313 $97

Designed to fit into beakers and flasks with narrow necks, Mixer Direct's Folding Lab Impeller is the perfect impeller for your laboratory. In the folded position these impellers have a diameter of less than 5/8" allowing them to fit inside your 24/40 joints. When rotated centrifugal force raises the impellers which open with an outside diameter of 3" and create radial flow. Made from corrosion resistant 316SS these impellers give you the mixing you require in those narrow necked laboratory vessels.

explosion proof high shear disperser

1.5HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1015XDA $5,065

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside...

Air Powered Disperser

1.5HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1015ADA $2,799

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Air Powered disperser

4HP Air High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2040ABA $3,623

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by the included precision needle valve to meter the air flow to the...

Electric High Shear Disperser

1.5HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2015VBA $3,740

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Air Powered disperser

1.5HP Air High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2015ABA $3,145

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by the included precision needle valve to meter the air flow to the...