Stiffening Plates for 12" Blade

Stiffening Plates for 12" Blade

Default Title
$307
Customize Item

Details

Stiffening Plates provide strength and durability for large high shear dispersion blades. The mixer blade re-enforcement provides support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 6" stiffening plates to sandwich a 12" dispersion blade and can be bored to match any size center hole. Dispersion blade, hub, and shaft as shown in picture are sold separately

Have a Question?

Download Specs Sheet

Specifications

  • Item Number STFDBL012

Related Products

| View all
3/8" Bore Bolt-on Hub

3/8" Bore Bolt-on Hub

HUBDBL037-037 $84

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 3/8" bore and a 1" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

5/8" Bore Bolt-on Hub

5/8" Bore Bolt-on Hub

HUBDBL075-062 $115

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 5/8" bore and a 3/4" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

3/8" Dia. Dispersion Blade Adapter Shaft

3/8" Dia. Dispersion Blade Adapter Shaft

BAS037006 $49

Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct's turned and threaded 3/8" shaft adapter allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This blade adapter shaft is 3/8" in diameter with a 1/4" thread.

3/8" Dispersion Blade Adapter Washer

3/8" Dispersion Blade Adapter Washer

BAW375-250 $19

The Dispersion Blade Adapter Washer allows both 1/4" and 3/8" dispersion blades to be fitted on a 1/4" blade adapter. The washer secures the 3/8" center of a larger dispersion blade tightly against the 1/4" shaft, eliminating the need to additionally switch both shaft and blade when changing applications.