Chemical Industry

Horsepower

Speed Controller

Gearbox

Motor Type

Shaft Diameter

Impeller Diameter

Enclosure Type

Number of Impellers

Impeller Attachment

Phase

5 Gal Pail Ring Mount Mixer 3/4 HP AIR

5 Gal Pail Ring Mount Mixer 3/4 HP AIR

RGM075AIR $789

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire mixer can move to fit to a center or side opening in the lid. The air motor is equipped with a muffler and needle control valve.

3/4 HP Air Direct Drive Bung Mount

3/4 HP Air Direct Drive Bung Mount

BUG075ADD-28 $1,242

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum hole mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

5 Gal Pail Ring Mount Mixer 1.5 HP AIR

5 Gal Pail Ring Mount Mixer 1.5 HP AIR

RGM150AIR $889

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire mixer can move to fit to a center or side opening in the lid. The air motor is equipped with a muffler and needle control valve.

1/2 HP Electric Direct Drive Bung Mount

1/2 HP Electric Direct Drive Bung Mount

BUG050EDD-28 $1,119

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bug openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum hole mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

BUG150ADD-S-28 $1,601

This air agitator mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The direct drive mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

5 Gal Pail Ring Mount Mixer 1/2 HP Variable Speed

5 Gal Pail Ring Mount Mixer 1/2 HP Variable Speed

RGM050VMR $1,612

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon bucket stirrer can move to fit to a center or side opening in the lid. VFD can read out frequency and is control with a membrane touch pad.

1.5 HP Air Direct Drive Bung Mount

1.5 HP Air Direct Drive Bung Mount

BUG150ADD-28 $1,401

This air powered drum mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each air powered drum mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

4 HP Air Gear Drive Lightweight Tote Bracket

4 HP Air Gear Drive Lightweight Tote Bracket

TBE400AGD $2,982

Download the economy tote bracket air gear drive mixer tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1/2 HP Electric Gear Drive Bung Mount

1/2 HP Electric Gear Drive Bung Mount

BUG050EGD-28 $1,745

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each electric gear drive mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

1.5 HP Electric Gear Drive Tote Bracket Mount

1.5 HP Electric Gear Drive Tote Bracket Mount

TBM150EGD $3,325

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1 HP Electric Direct Drive Sealed Bung Mount Mixer

1 HP Electric Direct Drive Sealed Bung Mount Mixer

BUG100EDD-S-28 $1,482

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Variable Speed Direct Drive Drum Clamp Mount

1/2 HP Variable Speed Direct Drive Drum Clamp Mount

DCM050VDD $1,937

Download The Drum Clamp Mount Variable Direct Drive. This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum clamp agitator comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/2 HP Electric Direct Drive Clamp Mount

1/2 HP Electric Direct Drive Clamp Mount

DCM050EDD $1,307

Download The Electric Direct Drive Tech Sheet. This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This clamp mount mixer machine comes standard with a 5/8” diameter 316SS shaft and (1) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1.5 HP Electric Gear Drive Lightweight Tote Bracket

1.5 HP Electric Gear Drive Lightweight Tote Bracket

TBE150EGD $2,663

Download the economy tote bracket electric gear drive tech sheet. Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1/2 HP Electric Gear Drive Lightweight Tote Bracket

1/2 HP Electric Gear Drive Lightweight Tote Bracket

TBE050EGD $2,342

Download the economy tote bracket electric gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1.5 HP Air Gear Heavy-Duty Tote Bracket Mount

1.5 HP Air Gear Heavy-Duty Tote Bracket Mount

TBM150AGD $3,254

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

4 HP Air Gear Drive Tote Bracket Mount

4 HP Air Gear Drive Tote Bracket Mount

TBM400AGD $3,738

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

3/4 HP Electric Gear Drive Lightweight Tote Bracket

3/4 HP Electric Gear Drive Lightweight Tote Bracket

TBE075EGD $2,421

Download the economy tote bracket electric gear drive tech sheet. Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

3/4 HP Air Direct Drive Drum Clamp Mount

3/4 HP Air Direct Drive Drum Clamp Mount

DCM075ADD $1,435

Download The Air Direct Drive Drum Clamp mount Tech Sheet This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/2 HP Electric Gear Drive Tote Bracket Mount

1/2 HP Electric Gear Drive Tote Bracket Mount

TBM050EGD $2,929

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this IBC tote mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1/2 HP Variable Speed Direct Drive Bung Mount

1/2 HP Variable Speed Direct Drive Bung Mount

BUG050VDD-28 $1,845

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1/2 HP Explosion Proof Direct Drive Bung Mount

1/2 HP Explosion Proof Direct Drive Bung Mount

BUG050XDD-28 $1,684

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The NPT bung mount mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1 HP Heavy-Duty Direct Drive Mixer Clamp Mount

1 HP Heavy-Duty Direct Drive Mixer Clamp Mount

DCM150EDD $1,657

This bung inserted mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (3) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

4 HP Air Direct Drive Sealed Bung Mount Mixer

4 HP Air Direct Drive Sealed Bung Mount Mixer

BUG400ADD-S-28 $2,158

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The sealed bung mount mixer will work both inside and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each air powered impeller machine comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

3/4 HP Explosion Proof Gear Drive Tote Bracket Mount

3/4 HP Explosion Proof Gear Drive Tote Bracket Mount

TBM075XGD $3,567

Designed to mix IBC Totes, these heavy duty IBC tote mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this explosion proof mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

3/4 HP Explosion Proof Gear Drive Lightweight Tote Bracket

3/4 HP Explosion Proof Gear Drive Lightweight Tote Bracket

TBE075XGD $2,855

Download the economy tote bracket explosion proof gear drive tech sheet. Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

3/4 HP Air Gear Drive Lightweight Tote Bracket

3/4 HP Air Gear Drive Lightweight Tote Bracket

TBE075AGD $2,338

Download the economy tote bracket air gear drive mixer tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization options for this IBC blender include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler.

1/2 HP Electric Direct Drive Sealed Bung Mount Mixer

1/2 HP Electric Direct Drive Sealed Bung Mount Mixer

BUG050EDD-S-28 $1,319

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bug openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum stirrer mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Variable Speed Direct Drive Bung Mount

1.5 HP Variable Speed Direct Drive Bung Mount

BUG150VDD-28 $2,260

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

3/4 HP Electric Gear Drive Tote Bracket Mount

3/4 HP Electric Gear Drive Tote Bracket Mount

TBM075EGD $2,999

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

TBM150XGD $3,854

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

TBM150VGD $4,265

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1.5 HP Air Gear Drive Lightweight Tote Bracket

1.5 HP Air Gear Drive Lightweight Tote Bracket

TBE150AGD $2,595

Download the economy tote bracket air gear drive mixer tech sheet. Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1 HP Variable Speed Direct Drive Drum Clamp Mount

1 HP Variable Speed Direct Drive Drum Clamp Mount

DCM100VDD $2,138

Download The Drum Clamp Mount Variable Direct Drive. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG100XDD-S-28 $2,082

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The industrial sealed bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Electric Direct Drive Bung Mount

1.5 HP Electric Direct Drive Bung Mount

BUG150EDD-28 $1,521

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each NPT bung mounting mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

4 HP Air Direct Drive Drum Clamp Mount

4 HP Air Direct Drive Drum Clamp Mount

DCM400ADD $2,182

This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (4) 4" 304SS set screw attached impellers. Our air motor provides an economical variable speed option and can be used in hazardous environments. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

3/4 HP Air Gear Drive Tote Bracket Mount

3/4 HP Air Gear Drive Tote Bracket Mount

TBM075AGD $3,029

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

3/4 HP Air Gear Drive Bung Mount

3/4 HP Air Gear Drive Bung Mount

BUG075AGD-28 $1,964

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

1/2 HP Explosion Proof Gear Drive Sealed Bung Mount

1/2 HP Explosion Proof Gear Drive Sealed Bung Mount

BUG050XGD-S-28 $2,509

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Variable Speed Gear Drive Lightweight Tote Bracket

1.5 HP Variable Speed Gear Drive Lightweight Tote Bracket

TBE150VGD $3,603

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impellers will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1.5 HP Air Direct Drive Drum Clamp Mount

1.5 HP Air Direct Drive Drum Clamp Mount

DCM150ADD $1,733

This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. Our air motor provides an economical variable speed option and can be used in hazardous environments. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

BUG100VDD-S-28 $2,187

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Gear Drive Sealed Bung Mount

1 HP Explosion Proof Gear Drive Sealed Bung Mount

BUG100XGD-S-28 $2,849

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. This overhead bung mixer is rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Direct Drive Bung Mount

1 HP Explosion Proof Direct Drive Bung Mount

BUG100XDD-28 $1,882

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The explosion proof bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each direct electric barrel mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1 HP Electric Direct Drive Clamp Mount

1 HP Electric Direct Drive Clamp Mount

DCM100EDD $1,433

Download The Electric Direct Drive Tech Sheet. This bung inserted mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

5 Gal Pail Ring Mount Mixer 1 HP Variable Speed

5 Gal Pail Ring Mount Mixer 1 HP Variable Speed

RGM100VMR $1,778

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon bucket stirrer can move to fit to a center or side opening in the lid. VFD can read out frequency and is control with a membrane touch pad.

5 Gal Pail Ring Mount Mixer 1/2 HP TEFC

5 Gal Pail Ring Mount Mixer 1/2 HP TEFC

RGM050EMR $982

Designed to sit comfortably on top of a five-gal pail, the Ring Mount, 5-gallon mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon mixer can move to fit to a center or side opening in the lid.