Chemical Industry

Horsepower

Motor Type

Shaft Diameter

Impeller Diameter

Lift Type

10HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

10HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3100XBA $17,389

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3050XBA $14,618

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

10HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

10HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3100VBA $15,317

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

5HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

5HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3050VBA $12,639

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

3HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 20 Gal Containers

3HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 20 Gal Containers

RP2030XBA $8,627

The RP2 post mount rotor stator can handle all your high shear mixing needs from 5-20 gallons. With a 24” lift the RP2 rotor stator can easily accommodate a variety of mixing vessels. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be positioned at any height within the mixing vessel. This is valuable if you need to mix products at varying viscosities. Changing out the stator on the RP2 for different chemistries can be done quickly and easily. The RP2 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. The speed of the RP2 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP2 operates at speeds from 0-5000 RPM and accommodates vessels up to 25”. Customize your RP2 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest. 

2HP Explosion Proof Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

2HP Explosion Proof Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

RP1020XDA $7,185

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

3HP Electric Post Mount Rotor Stator for up to 20 Gal Containers with Air Lift

3HP Electric Post Mount Rotor Stator for up to 20 Gal Containers with Air Lift

RP2030VBA $6,518

The RP2 post mount rotor stator can handle all your high shear mixing needs from 5-20 gallons. With a 24” lift the RP2 rotor stator can easily accommodate a variety of mixing vessels. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be positioned at any height within the mixing vessel. This is valuable if you need to mix products at varying viscosities. Changing out the stator on the RP2 for different chemistries can be done quickly and easily. The RP2 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. The speed of the RP2 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP2 operates at speeds from 0-5000 RPM and accommodates vessels up to 25”. Customize your RP2 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest. 

3HP Electric Lab Post Mount Rotor Stator with Electric Lift for up to 5 Gal Containers

3HP Electric Lab Post Mount Rotor Stator with Electric Lift for up to 5 Gal Containers

RP1030VDE $5,411

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

2HP Electric Lab Post Mount Rotor Stator with Electric Lift for up to 5 Gal Containers

2HP Electric Lab Post Mount Rotor Stator with Electric Lift for up to 5 Gal Containers

RP1020VDE $5,146

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

3HP Electric Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

3HP Electric Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

RP1030VDA $5,223

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

2HP Electric Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

2HP Electric Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

RP1020VDA $4,958

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.