20 HP Dual Shaft Disperser With 200 Gallon Vessel
20 HP Dual Shaft Disperser With 200 Gallon Vessel
20 HP Dual Shaft Disperser With 200 Gallon Vessel
20 HP Dual Shaft Disperser With 200 Gallon Vessel
20 HP Dual Shaft Disperser With 200 Gallon Vessel

20 HP Dual Shaft Disperser With 200 Gallon Vessel

Default Title
Lead Time: 12 weeks $60,342
Customize Item

Details

Download the Dual Shaft spec sheet Standard Features: Air over oil with oil reservoir and pendant controls (50 gals or more) Lift and vessel safety limit switches 304ss interchangable mix vessel with flat bottom, fork truck channels, and casters. 304ss lid with dust seal Vessel locating and locking retaining bracket All interior welds of the dual shaft mixer vessel are ground smooth for cleanability Multi member nylon scrapers The dual shaft mixer has independent motor, drive, and control systems for low and high speed shaft Fittings: 2" -150# drain fitting 3" triclamp sight glass in lid 3" triclamp charge port in lid 1" NPT half coupling Optional Features: Vacuum Internal pressure Jacket for heating and cooling Insulation Temperature probe Pressure sensors Batch Sensors Explosion proof Food grade finishes Complete batch control system Increased clearance to the floor 316ss wetted Full customization available for this dual shaft mixer

Have a question?

Download Specs Sheet

Specifications

  • Item Number DS0200OSAANS
  • Air Lift Requirement 80PSI@1CFM
  • Blade Attachment Bolt 5/8/11
  • Bottom Head Flat
  • Bottom Head Fitting 1" Female NPT Half Coupling
  • Bottom Head Thickness 10 Ga
  • Enclosure Type IP55
  • External Material 304SS
  • External Surface Finish 2B
  • Gearbox Yes
  • Gearbox Enclosure Painted Steel
  • Gearbox Ratio 40.7
  • Gear Type Helical
  • Helical Diameter 38 in
  • Helical HP 10 HP
  • Helical RPM 20-43
  • Helical Seal Lip
  • Horsepower 20
  • Impeller Attachment bolt-on
  • Impeller Diameter 12 in
  • Impeller Material 304SS
  • Impeller Type Dispersion Blade
  • Lid Type Dish
  • Lift Height 48 in
  • Lift Type Air over Oil
  • Max Current 36.5 A
  • Motor Type TEFC
  • Mount Post
  • Number of Impellers 1
  • Outer Diameter 40 in
  • Phase 3
  • RPM 800-1600
  • Scrapers Yes
  • Seal Yes
  • Seal Material VIton
  • Seal Type Lip
  • Shaft Attachment Integrated
  • Shaft Diameter 1.5 in
  • Shaft Length 36 in
  • Shaft Material 316SS
  • Speed Controller Yes
  • Tank Mounting Options Casters
  • Top Head Lid
  • Top Head Fitting 1 1" Female NPT Half Coupling
  • Top Head Thickness 10 Ga
  • Total Height Lowered 80in
  • Total Height Raised 128 in
  • Total Height 44 in
  • Total Volume 239 gal
  • Voltage 460 V
  • Volume 200 gal
  • Wetted Material 304SS
  • Wetted Surface Finish 2B-G

Related Products

| View all
1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,997

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

electric high shear disperser

1.5HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1015VDA $3,077

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,170

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

Electric High Shear Disperser

2HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020VBA $3,830

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...