Electric High Speed Disperser
Electric High Speed Disperser

7.5HP DP3 Electric High Speed Disperser with Air Lift

Default Title
Lead Time: 4 weeks $7,667
Customize Item

Details

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are controlled by NEMA 4X washdown membrane buttons w/ an RPM readout. The speed range for this unit is 0-2400 RPM. A 1.5" 316SS shaft is standard on all DP3 units, precision ground and polished along its entire length for high speed mixer service. Customizations and options on these units include container holders, slower or faster speed ranges, expolsion proof tachometers, and a variety of lift heights. As with all of our mixers, Mixer Direct is committed to best in the industry lead times. Please contact our sales engineers if you have any questions on sizing or expedited delivery (812) 202-4047.

Have a question?

Download Specs Sheet

Specifications

  • Item Number DP3075VBA
  • Air Lift Requirement 80PSI@1CFM
  • Blade Attachment Bolt 5/8/11
  • Enclosure Type IP55
  • Horsepower 7.5
  • Impeller Attachment bolt-on
  • Impeller Diameter 8 in
  • Impeller Material 304SS
  • Impeller Type Dispersion Blade
  • Lift Height 36 in
  • Lift Type Air
  • Max Current 12.4 A
  • Max Vessel Height 38 in
  • Motor Type TEFC
  • Mount Post
  • Number of Impellers 1
  • Phase 3
  • RPM 240-2400
  • Shaft Attachment Integrated
  • Shaft Diameter 1.5 in
  • Shaft Length 36 in
  • Shaft Material 316SS
  • Speed Controller Yes
  • Throat Depth 19 in
  • Total Height Lowered 53in
  • Total Height Raised 89 in
  • Voltage 460 V

Related Products

| View all
1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,997

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

electric high shear disperser

1.5HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1015VDA $3,077

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Electric High Shear Disperser

2HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020VBA $3,830

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,170

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...