55-Gallon Drum Mixers & Agitators

In order to minimize transfer waste and save capital investment, many manufacturers choose to do their mixing right in the drum where they receive their product. In order to do that appropriately Mixer Direct has developed a line of drum agitators that attach in a variety of ways to the 55-gallon drum. Some of our 55-gallon drum agitators clamp on to the side or a stand placed next to the drum. Others prefer to replace the lid on an open top drum with a Drum Lid Mount drum mixer. For closed drums, the bung mount mixer has folding impellers that open up when the motor is activated. Other options include paddle mixers, axial flow turbines and more.

Contact Us

Speed Controller

Gearbox

Motor Type

Shaft Diameter

Impeller Type

Enclosure Type

Number of Impellers

Phase

3/4 HP Air Direct Drive Drum Lid Mount

3/4 HP Air Direct Drive Drum Lid Mount

DLM075ADD-28 $1,540

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. Ideal for use in small batchs and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower.

3/4 HP Air Direct Drive Bung Mount

3/4 HP Air Direct Drive Bung Mount

BUG075ADD-28 $1,242

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum hole mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

1/2 HP Electric Direct Drive Bung Mount

1/2 HP Electric Direct Drive Bung Mount

BUG050EDD-28 $1,119

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bug openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum hole mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

BUG150ADD-S-28 $1,601

This air agitator mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The direct drive mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Air Direct Drive Bung Mount

1.5 HP Air Direct Drive Bung Mount

BUG150ADD-28 $1,401

This air powered drum mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each air powered drum mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

1/2 HP Electric Gear Drive Bung Mount

1/2 HP Electric Gear Drive Bung Mount

BUG050EGD-28 $1,745

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each electric gear drive mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

1 HP Electric Direct Drive Sealed Bung Mount Mixer

1 HP Electric Direct Drive Sealed Bung Mount Mixer

BUG100EDD-S-28 $1,482

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/3 HP Electric Direct Drive Drum Lid Mount

1/3 HP Electric Direct Drive Drum Lid Mount

DLM033EDD-28 $1,212

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. Ideal for use in small batchs and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower.

1/2 HP Variable Speed Direct Drive Drum Clamp Mount

1/2 HP Variable Speed Direct Drive Drum Clamp Mount

DCM050VDD $1,937

Download The Drum Clamp Mount Variable Direct Drive. This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum clamp agitator comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/2 HP Electric Direct Drive Clamp Mount

1/2 HP Electric Direct Drive Clamp Mount

DCM050EDD $1,307

Download The Electric Direct Drive Tech Sheet. This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This clamp mount mixer machine comes standard with a 5/8” diameter 316SS shaft and (1) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

3/4 HP Air Direct Drive Drum Clamp Mount

3/4 HP Air Direct Drive Drum Clamp Mount

DCM075ADD $1,435

Download The Air Direct Drive Drum Clamp mount Tech Sheet This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/2 HP Variable Speed Direct Drive Bung Mount

1/2 HP Variable Speed Direct Drive Bung Mount

BUG050VDD-28 $1,845

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1/2 HP Explosion Proof Direct Drive Bung Mount

1/2 HP Explosion Proof Direct Drive Bung Mount

BUG050XDD-28 $1,684

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The NPT bung mount mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1 HP Heavy-Duty Direct Drive Mixer Clamp Mount

1 HP Heavy-Duty Direct Drive Mixer Clamp Mount

DCM150EDD $1,657

This bung inserted mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (3) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

4 HP Air Direct Drive Sealed Bung Mount Mixer

4 HP Air Direct Drive Sealed Bung Mount Mixer

BUG400ADD-S-28 $2,158

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The sealed bung mount mixer will work both inside and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each air powered impeller machine comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/3 HP Variable Speed Direct Drive Drum Lid Mount

1/3 HP Variable Speed Direct Drive Drum Lid Mount

DLM033VDD-28 $1,917

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. Ideal for use in small batchs and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the barrel lid mixer, providing a significant amount of flow per horsepower. Includes VFD with Hz readout and membrane touch speed control.

1/2 HP Electric Direct Drive Sealed Bung Mount Mixer

1/2 HP Electric Direct Drive Sealed Bung Mount Mixer

BUG050EDD-S-28 $1,319

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bug openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum stirrer mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Variable Speed Direct Drive Bung Mount

1.5 HP Variable Speed Direct Drive Bung Mount

BUG150VDD-28 $2,260

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1 HP Variable Speed Direct Drive Drum Clamp Mount

1 HP Variable Speed Direct Drive Drum Clamp Mount

DCM100VDD $2,138

Download The Drum Clamp Mount Variable Direct Drive. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG100XDD-S-28 $2,082

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The industrial sealed bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Electric Direct Drive Bung Mount

1.5 HP Electric Direct Drive Bung Mount

BUG150EDD-28 $1,521

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each NPT bung mounting mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

4 HP Air Direct Drive Drum Clamp Mount

4 HP Air Direct Drive Drum Clamp Mount

DCM400ADD $2,182

This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (4) 4" 304SS set screw attached impellers. Our air motor provides an economical variable speed option and can be used in hazardous environments. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

3/4 HP Air Gear Drive Bung Mount

3/4 HP Air Gear Drive Bung Mount

BUG075AGD-28 $1,964

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

1/2 HP Explosion Proof Gear Drive Sealed Bung Mount

1/2 HP Explosion Proof Gear Drive Sealed Bung Mount

BUG050XGD-S-28 $2,509

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Air Direct Drive Drum Clamp Mount

1.5 HP Air Direct Drive Drum Clamp Mount

DCM150ADD $1,733

This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. Our air motor provides an economical variable speed option and can be used in hazardous environments. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

BUG100VDD-S-28 $2,187

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Gear Drive Sealed Bung Mount

1 HP Explosion Proof Gear Drive Sealed Bung Mount

BUG100XGD-S-28 $2,849

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. This overhead bung mixer is rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Direct Drive Bung Mount

1 HP Explosion Proof Direct Drive Bung Mount

BUG100XDD-28 $1,882

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The explosion proof bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each direct electric barrel mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1 HP Electric Direct Drive Clamp Mount

1 HP Electric Direct Drive Clamp Mount

DCM100EDD $1,433

Download The Electric Direct Drive Tech Sheet. This bung inserted mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1.5 HP Explosion Proof Electric Direct Drive Bung Mount

1.5 HP Explosion Proof Electric Direct Drive Bung Mount

BUG150XDD-28 $2,130

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each NPT bung mounting mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

1.5 HP Variable Speed Direct Drive Clamp Mount

1.5 HP Variable Speed Direct Drive Clamp Mount

DCM150VDD $2,362

Download The Electric Direct Drive Tech Sheet This bung inserted mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (3) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

4 HP Air Gear Drive Bung Mount

4 HP Air Gear Drive Bung Mount

BUG400AGD-28 $2,502

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The air gear driven mixer will work both inside and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each folding impeller bung mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

4 HP Air Direct Drive Bung Mount

4 HP Air Direct Drive Bung Mount

BUG400ADD-28 $1,958

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

3/4 HP Air Gear Drive Sealed Bung Mount Mixer

3/4 HP Air Gear Drive Sealed Bung Mount Mixer

BUG075AGD-S-28 $2,164

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

3/4 HP Air Direct Drive Drum Bracket Mount

3/4 HP Air Direct Drive Drum Bracket Mount

DBM075ADD $1,618

Download the Drum Bracket Mount Air Direct Drive Mixer Tech Sheet Drum Bracket Mixers unique design attaches to any standard metal 55 gallon drum. The air direct drive drum mixer's lightweight and sturdy construction allows mixing to be performed in the drum eliminating the need to transfer the product to another container. Mixer Direct’s Drum Bracket’s angled end plate provides a rigid mount to the 55 gallon drum allowing for more vigorous mixing. The air direct drive allows mixing from low to medium viscosities and comes equipped with (1) 4" propeller . Mixer Direct offers a unique baffle option for this heavy-duty industrial mixer to prevent vortexing and improve top to bottom mixing. Our customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/3 HP Explosion Proof Direct Drive Drum Lid Mount

1/3 HP Explosion Proof Direct Drive Drum Lid Mount

DLM033XDD-28 $1,732

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. Ideal for use in small batchs and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes an explosion proof motor for rated environments.

1/2 HP Variable Speed Gear Drive Sealed Bung Mount

1/2 HP Variable Speed Gear Drive Sealed Bung Mount

BUG050VGD-S-28 $2,650

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Variable Speed Gear Drive Bung Mount

1/2 HP Variable Speed Gear Drive Bung Mount

BUG050VGD-28 $2,450

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1/2 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

1/2 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

BUG050VDD-S-28 $2,045

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Explosion Proof Gear Drive Bung Mount

1/2 HP Explosion Proof Gear Drive Bung Mount

BUG050XGD-28 $2,309

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1/2 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1/2 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG050XDD-S-28 $1,884

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Electric Gear Drive Sealed Bung Mount Mixer

1/2 HP Electric Gear Drive Sealed Bung Mount Mixer

BUG050EGD-S-28 $1,945

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Air Gear Drive Sealed Bung Mount Mixer

1.5 HP Air Gear Drive Sealed Bung Mount Mixer

BUG150AGD-S-28 $2,170

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Air Gear Drive Bung Mount

1.5 HP Air Gear Drive Bung Mount

BUG150AGD-28 $1,970

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller on this air powered barrel mixer will give you precise speed control on the no-lube air motor.

1 HP Variable Speed Gear Drive Sealed Bung Mount Mixer

1 HP Variable Speed Gear Drive Sealed Bung Mount Mixer

BUG100VGD-S-28 $3,057

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Variable Speed Gear Drive Bung Mount

1 HP Variable Speed Gear Drive Bung Mount

BUG100VGD-28 $2,857

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1 HP Variable Speed Direct Drive Bung Mount

1 HP Variable Speed Direct Drive Bung Mount

BUG100VDD-28 $1,987

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1 HP Explosion Proof Gear Drive Bung Mount

1 HP Explosion Proof Gear Drive Bung Mount

BUG100XGD-28 $2,649

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.