Drum Mixers

In order to minimize transfer waste and save capital investment, many manufacturers choose to do their mixing right in the drum where they receive their product. In order to do that appropriately Mixer Direct has developed a line of drum agitators that attach in a variety of ways to the 55-gallon drum. Some of our 55-gallon drum agitators clamp on to the side or a stand placed next to the drum. Others prefer to replace the lid on an open top drum with a Drum Lid Mount drum mixer. For closed drums, the bung mount mixer has folding impellers that open up when the motor is activated.

Contact Us

Free Resources

Download Catalog

Horsepower

Speed Controller

Gearbox

Motor Type

Enclosure Type

Phase

1.5 HP Air Direct Drive Bung Mount

1.5 HP Air Direct Drive Bung Mount

BUG150ADD $1,583

This air powered drum mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each air powered drum mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

3/4 HP Variable Speed Direct Drive Drum Clamp Mount

3/4 HP Variable Speed Direct Drive Drum Clamp Mount

DCM075VDD $1,728

Download The Drum Clamp Mount Variable Direct Drive This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each electric direct drive mixer comes standard with a 5/8” diameter 316SS shaft and(2) 4" 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

BUG150ADD-S $1,407

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG100XDD-S $2,003

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The industrial sealed bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

3/4 HP Variable Speed Direct Drive Bung Mount

3/4 HP Variable Speed Direct Drive Bung Mount

BUG075VDD $2,043

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The variable electric bung hole mixer machine will work both inside and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

3/4 HP Explosion Proof Direct Drive Clamp Mount

3/4 HP Explosion Proof Direct Drive Clamp Mount

DCM075XDD $1,442

Download The Drum Clamp Mount Explosion Proof Direct Drive Tech Sheet This direct drive mixer machine allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. The explosion proof motor is rated Division I, Class I, Group D and can be used in locations with contain flammable gas or vapor. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

3/4 HP Explosion Proof Direct Drive Bung Mount

3/4 HP Explosion Proof Direct Drive Bung Mount

BUG075XDD $1,527

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The barrel lid mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

3/4 HP Electric Direct Drive Bung Mount

3/4 HP Electric Direct Drive Bung Mount

BUG075EDD $1,158

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The electric powered barrel mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

1/2 HP Variable Speed Gear Drive Drum Clamp Mount

1/2 HP Variable Speed Gear Drive Drum Clamp Mount

DCM050VGD $2,600

Download The Drum Clamp Mount Variable Gear Drive Tech Sheet This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. The mixer's 5:1 helical gear reduction provides the torque to mix medium viscosities. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Variable Speed Direct Drive Drum Clamp Mount

1 HP Variable Speed Direct Drive Drum Clamp Mount

DCM100VDD $2,105

Download The Drum Clamp Mount Variable Direct Drive. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Explosion Proof Direct Drive Bung Mount

1 HP Explosion Proof Direct Drive Bung Mount

BUG100XDD $1,803

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The explosion proof bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each direct electric barrel mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1 HP Electric Direct Drive Clamp Mount

1 HP Electric Direct Drive Clamp Mount

DCM100EDD $1,400

Download The Electric Direct Drive Tech Sheet This bung inserted mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

3/4 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

3/4 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG075XDD-S $1,627

This bung mixer with folding impeller allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

3/4 HP Electric Direct Drive Sealed Bung Mount Mixer

3/4 HP Electric Direct Drive Sealed Bung Mount Mixer

BUG075EDD-S $1,258

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

3/4 HP Electric Direct Drive Clamp Mount

3/4 HP Electric Direct Drive Clamp Mount

DCM075EDD $1,060

Download The Electric Direct Drive Tech Sheet This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

3/4 HP Air Gear Drive Drum Clamp Mount

3/4 HP Air Gear Drive Drum Clamp Mount

DCM075AGD $1,339

Download The Drum Clamp Mount Air Gear Drive Tech Sheet This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. The electric gear drive has a 5:1 helical gear reduction which provides additional torque to your mixer. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/2 HP Explosion Proof Gear Drive Clamp Mount

1/2 HP Explosion Proof Gear Drive Clamp Mount

DCM050XGD $1,930

Download The Drum Clamp Mount Explosion Proof Gear Drive Tech Sheet This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. The explosion proof motor is rated Division I, Class I, Group D and can be used in locations with contain flammable gas or vapor. The 5:1 helical gear reduction provides the torque needed for vigorous mixing. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/2 HP Electric Gear Drive Drum Clamp Mount

1/2 HP Electric Gear Drive Drum Clamp Mount

DCM050EGD $1,380

Download The Drum Clamp Mount Electric Gear Drive Tech Sheet This mixer allows you to mount it directly to the side of a 55-gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability with this industrial agitator. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. The industrial agitator's 5:1 helical gear reduction provides the torque to mix medium viscosities. Mixer Direct customization options for this industrial agitator include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1.5 HP Air Direct Drive Drum Clamp Mount

1.5 HP Air Direct Drive Drum Clamp Mount

DCM150ADD $1,733

This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. Our air motor provides an economical variable speed option and can be used in hazardous environments. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Variable Speed Direct Drive Bung Mount

1 HP Variable Speed Direct Drive Bung Mount

BUG100VDD $1,955

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1 HP Electric Direct Drive Bung Mount

1 HP Electric Direct Drive Bung Mount

BUG100EDD $1,250

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each NPT bung mounting mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.