Ethanol & Bio Diesel Industry

Mount

Horsepower

Speed Controller

Motor Type

Shaft Diameter

Impeller Diameter

Enclosure Type

Number of Impellers

Impeller Attachment

5 Gal Pail Ring Mount Mixer 1/2 HP Variable Speed

5 Gal Pail Ring Mount Mixer 1/2 HP Variable Speed

RGM050VMR $1,746

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon bucket stirrer can move to fit to a center or side opening in the lid. VFD can read out frequency and is control with a membrane touch pad.

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $4,617

The DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers. As...

1.5HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

1.5HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1015XDA $7,665

The DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside of the rated area. This...

Electric High Shear Disperser

1HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2010VBA $5,097

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

5 Gal Pail Ring Mount Mixer 1 HP Variable Speed

5 Gal Pail Ring Mount Mixer 1 HP Variable Speed

RGM100VMR $1,983

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon bucket stirrer can move to fit to a center or side opening in the lid. VFD can read out frequency and is control with a membrane touch pad.

5 Gal Pail Ring Mount Mixer 1/2 HP TEFC

5 Gal Pail Ring Mount Mixer 1/2 HP TEFC

RGM050EMR $1,136

Designed to sit comfortably on top of a five-gal pail, the Ring Mount, 5-gallon mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon mixer can move to fit to a center or side opening in the lid.

5 Gal Pail Ring Mount Mixer 1 HP TEFC

5 Gal Pail Ring Mount Mixer 1 HP TEFC

RGM100EMR $1,295

Designed to sit comfortably on top of a five-gal pail, the Ring Mount, 5-gallon mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon mixer can move to fit to a center or side opening in the lid.