5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers
5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers
5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

Default Title
Lead Time: 4 weeks $14,984
Customize Item

Details

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

Have a Question?

Download Specs Sheet

Specifications

  • Item Number RP3050XBA
  • Air Lift Requirement 80PSI@1CFM
  • Enclosure Type IP55
  • Horsepower 5
  • Impeller Diameter 3.5 in
  • Impeller Material 316SS
  • Impeller Type Angle Slot Rotor Stator
  • Lift Height 36 in
  • Lift Type Air
  • Max Current 7.6 A
  • Max Vessel Height 40 in
  • Motor Type XP TEFC
  • Mount Post
  • Number of Impellers 1
  • Phase 3
  • RPM 360-3600
  • Shaft Diameter 1.25 in
  • Shaft Length 36 in
  • Shaft Material 316SS
  • Speed Controller Yes
  • Total Height Lowered 53in
  • Total Height Raised 89 in
  • Voltage 460 V

Related Products

| View all
5 Gal Pail Ring Mount Mixer 3/4 HP AIR

5 Gal Pail Ring Mount Mixer 3/4 HP AIR

RGM075AIR $1,284

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire mixer can move to fit to a center or side opening in the lid. The air motor is equipped with a muffler and needle control valve.

5 Gal Pail Ring Mount Mixer 1.5 HP AIR

5 Gal Pail Ring Mount Mixer 1.5 HP AIR

RGM150AIR $1,546

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire mixer can move to fit to a center or side opening in the lid. The air motor is equipped with a muffler and needle control valve.

1/2 HP Air Stirrer w/ Coupler

1/2 HP Air Stirrer w/ Coupler

ASH050DCO $593

This Air Stirrer powerhead is ready to attach to your stand and get to work. With a 10" X 5/8" stainless rod ground and polished to mate flawlessly with the SCP062062, this motor assembly will fit most lab or small batch operations. The air agitator's coupling will accept a 3/8" shaft. The air agitator's motor is equipped with a muffler and needle control valve.

5 Gal Pail Ring Mount Mixer 1/2 HP Variable Speed

5 Gal Pail Ring Mount Mixer 1/2 HP Variable Speed

RGM050VMR $1,746

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon bucket stirrer can move to fit to a center or side opening in the lid. VFD can read out frequency and is control with a membrane touch pad.