Food and Beverage Industry

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,170

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

2 HP Electric Direct Drive Heavy Duty Clamp Mount

2 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC200EDD $2,071

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

1.5 HP Electric Gear Drive Tote Bracket Mount

1.5 HP Electric Gear Drive Tote Bracket Mount

TBM150EGD $2,496

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1.5 HP Electric Gear Drive Lightweight Tote Bracket

1.5 HP Electric Gear Drive Lightweight Tote Bracket

TBE150EGD $2,250

Download the economy tote bracket electric gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

electric high shear disperser

1.5HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1015VDA $3,077

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

3/4 HP Variable Speed Direct Drive Tote Bracket Mount

3/4 HP Variable Speed Direct Drive Tote Bracket Mount

TBM075VDD $2,596

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1/2 HP Explosion Proof Direct Drive Tote Bracket Mount

1/2 HP Explosion Proof Direct Drive Tote Bracket Mount

TBM050XDD $1,656

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

sanitary tri clamp mixer

1/2 HP Electric Direct Drive Tri-Clamp Mount Mixer

TCM050EDD $1,664

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mixer to fit any application just call one of our sales engineers or fill out a contact form!

Electric High Shear Disperser

2HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020VBA $3,830

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

2 HP Electric Gear Drive Heavy Duty Clamp Mount

2 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC200EGD $3,458

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

1/2 HP Explosion Proof Direct Drive Drum Lid Mount

1/2 HP Explosion Proof Direct Drive Drum Lid Mount

DLM050XDD $1,531

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. Ideal for use in small batchs and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes an explosion proof motor for rated environments.

1/2 HP Explosion Proof Direct Drive Bung Mount

1/2 HP Explosion Proof Direct Drive Bung Mount

BUG050XDD $1,626

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The NPT bung mount mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

sanitary tri clamp mixer

1.5 HP Variable Speed Electric Direct Drive Tri-Clamp Mount Mixer

TCM150VDD $2,745

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment.. This mixer is equipped with a NEMA 4X washdown Variable speed controller. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1.5 HP Electric Direct Drive Heavy Duty Clamp Mount

1.5 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC150EDD $1,845

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

sanitary tri clamp mixer

1 HP Explosion Proof Electric Gear DriveTri-Clamp Mount Mixer

TCM100XGD $3,584

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Explosion Proof Direct Drive Drum Lid Mount

1 HP Explosion Proof Direct Drive Drum Lid Mount

DLM100XDD $1,796

Ever wish that you could install the mixer and cover the drum in one easy step? Wish no more. The drum cover mixing machine is ideal for use in small batches and where some shear action is required. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistence to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes an explosion proof motor for rated environments.

2 HP Variable Speed Direct Drive Heavy Duty Clamp Mount

2 HP Variable Speed Direct Drive Heavy Duty Clamp Mount

HDC200VDD $2,889

Download The Heavy Duty Clamp Mount Variable Direct Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

sanitary tri clamp mixer

1/2 HP Variable Speed Electric Direct DriveTri-Clamp Mount Mixer

TCM050VDD $2,505

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment.. This mixer is equipped with a NEMA 4X washdown Variable speed controller. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1.5 HP Variable Speed Direct Drive Lightweight Tote Bracket

1.5 HP Variable Speed Direct Drive Lightweight Tote Bracket

TBE150VDD $2,785

Download the economy tote bracket variable speed drive tech sheet Designed to mix IBC Totes, the bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. Customization option include longer shafts, gear ratios, and varied impellers.

1.5 HP Electric Direct Drive Tote Bracket Mount

1.5 HP Electric Direct Drive Tote Bracket Mount

TBM150EDD $1,662

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

Sanitary Tri Clamp Mount Mixer

1 HP Explosion Proof Electric Direct Drive Tri-Clamp Mount Mixer

TCM100XDD $2,357

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

Raiden Standard 5 HP Flange Mount Top Entry Mixer

Raiden Standard 5 HP Flange Mount Top Entry Mixer

RDNSTD050F-90 $4,962

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard flange mount mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden mixer.  

Raiden Standard 2 HP Plate Mount Top Entry Mixer

Raiden Standard 2 HP Plate Mount Top Entry Mixer

RDNSTD020P-80 $3,394

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard steel mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden mixer.  

3/4 HP Variable Speed Gear Drive Plate Mount

3/4 HP Variable Speed Gear Drive Plate Mount

PLT075VGD $3,590

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3/4 HP Explosion Proof Gear Drive Tote Bracket Mount

3/4 HP Explosion Proof Gear Drive Tote Bracket Mount

TBM075XGD $2,655

Designed to mix IBC Totes, these heavy duty IBC tote mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this explosion proof mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

3/4 HP Explosion Proof Direct Drive Lightweight Tote Bracket

3/4 HP Explosion Proof Direct Drive Lightweight Tote Bracket

TBE075XDD $1,530

Download the economy tote bracket explosion proof direct drive tech sheet Designed to mix IBC Totes, the bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. Customization option include longer shafts, gear ratios, and varied impellers.

3 HP Electric Direct Drive Heavy Duty Clamp Mount

3 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC300EDD $2,210

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer includes a lower support bearing which takes the radial shaft load off of the motor/gearbox extending its longevity. Outstanding adjustability allows shaft positioning on two axes of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw-attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths

2 HP Electric Direct Drive Flange Mount

2 HP Electric Direct Drive Flange Mount

FLG200EDD $2,160

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1/3 HP Variable Speed Gear Drive Flange Mount

1/3 HP Variable Speed Gear Drive Flange Mount

FLG033VGD $2,824

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/3 HP Variable Speed Direct Drive Tote Bracket Mount

1/3 HP Variable Speed Direct Drive Tote Bracket Mount

TBM033VDD $2,299

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1/3 HP Explosion Proof Gear Drive Heavy Duty Clamp Mount

1/3 HP Explosion Proof Gear Drive Heavy Duty Clamp Mount

HDC033XGD $2,235

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

1/3 HP Explosion Proof Direct Drive Lightweight Tote Bracket

1/3 HP Explosion Proof Direct Drive Lightweight Tote Bracket

TBE033XDD $1,400

Download the economy tote bracket explosion proof direct drive tech sheet Designed to mix IBC Totes, the bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. Customization option include longer shafts, gear ratios, and varied impellers.

Explosion proof heavy duty clamp mount

1/3 HP Explosion Proof Direct Drive Heavy Duty Clamp Mount

HDC033XDD $1,726

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

1/3 HP Electric Direct Drive Tri-Clamp Mount Mixer

1/3 HP Electric Direct Drive Tri-Clamp Mount Mixer

TCM033EDD $1,552

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability lightweight portability these agitators come equipped with stainless steel propellers. A high-performance seal ensures a sealed environment around the TCM mixer. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types for this TCM mixer as well. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

Sanitary Tri Clamp Mount Mixer

1/2 HP Explosion Proof Electric Direct Drive Tri-Clamp Mount Mixer

TCM050XDD $2,591

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

TBM150XGD $3,113

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

TBM150VGD $3,956

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1.5 HP Variable Speed Direct Drive Heavy Duty Clamp Mount

1.5 HP Variable Speed Direct Drive Heavy Duty Clamp Mount

HDC150VDD $2,598

Download The Heavy Duty Clamp Mount Variable Direct Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1.0HP Explosion Proof Direct Drive Tote Bracket Mount

1.0HP Explosion Proof Direct Drive Tote Bracket Mount

TBM100XDD $1,838

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1.0 HP Variable Speed Direct Drive Lightweight Tote Bracket

1.0 HP Variable Speed Direct Drive Lightweight Tote Bracket

TBE100VDD $2,640

Download the economy tote bracket variable speed drive tech sheet Designed to mix IBC Totes ,the bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. Customization option include longer shafts, gear ratios, and varied impellers.

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG100XDD-S $2,003

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The industrial sealed bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Direct Drive Heavy Duty Clamp Mount

1 HP Explosion Proof Direct Drive Heavy Duty Clamp Mount

HDC100XDD $2,298

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each heavy duty mixer includes a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each direct drive mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

5 Gal Pail Ring Mount Mixer 1/3 HP Explosion Proof

5 Gal Pail Ring Mount Mixer 1/3 HP Explosion Proof

RGM033XMR $1,040

Designed to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire explosion proof small mixer can move to fit to a center or side opening in the lid. Explosion proof motor can operate safely in high solvent environments.

sanitary white washdown tri clamp mixer

3/4 HP Variable Speed Electric Gear Drive White Washdown Tri-Clamp Mount Mixer

TCM075VGD-W $5,223

The Mixer Direct sanitary tri-clamp mixer line is built for sanitary applications requiring a wash down design. This line is constructed for food, various beverage and pharmaceutical applications, or any application requiring a high degree of cleanability. The sanitary tri-clamp ensures suitability for sanitary requirements that would necessitate a full wash down of the equipment. This white wash down construct protects against most types of chemical, moisture, or humidity related corrosion, and other washdown processes taking place in the vicinity where overspray might occur.

3/4 HP Explosion Proof Gear Drive Plate Mount

3/4 HP Explosion Proof Gear Drive Plate Mount

PLT075XGD $3,413

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

electric direct drive heavy duty clamp mount

3/4 HP Explosion Proof Direct Drive Heavy Duty Clamp Mount

HDC075XDD $2,190

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments. 3 Phase electric motor.

3 HP Variable Speed Gear Drive Plate Mount

3 HP Variable Speed Gear Drive Plate Mount

PLT300VGD $5,069

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

Electric High Shear Disperser

10HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

DP4100XBO $14,375

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. // For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out...