Food and Beverage Industry

Mount

Speed Controller

Gearbox

Motor Type

Impeller Diameter

Enclosure Type

Number of Impellers

Impeller Attachment

Phase

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

BUG150ADD-S $1,583

This air agitator mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The direct drive mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Electric Direct Drive Sealed Bung Mount Mixer

1 HP Electric Direct Drive Sealed Bung Mount Mixer

BUG100EDD-S $1,450

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Electric Direct Drive Sealed Bung Mount Mixer

1/2 HP Electric Direct Drive Sealed Bung Mount Mixer

BUG050EDD-S $1,165

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bug openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum stirrer mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG100XDD-S $2,003

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The industrial sealed bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

4 HP Air Direct Drive Sealed Bung Mount Mixer

4 HP Air Direct Drive Sealed Bung Mount Mixer

BUG400ADD-S $2,032

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The sealed bung mount mixer will work both inside and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each air powered impeller machine comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

BUG100VDD-S $2,155

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Explosion Proof Gear Drive Sealed Bung Mount

1 HP Explosion Proof Gear Drive Sealed Bung Mount

BUG100XGD-S $2,771

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. This overhead bung mixer is rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

5HP Dual Shaft Disperser With 25 Gallon Vessel

5HP Dual Shaft Disperser With 25 Gallon Vessel

DS0025ASAANA $27,600

Download the Dual Shaft spec sheet Standard Features: Airlift with pendant controls (50 gals or less) Lift and vessel safety limit switches 304ss interchangable mix vessel with flat bottom, fork truck channels, and casters. 304ss lid with dust seal Vessel locating and locking retaining bracket All interior welds of the double shaft mixer vessel are ground smooth for cleanability Multi member nylon scrapers The double shaft mixer has independent motor, drive, and control systems for low and high speed shaft Fittings: 2" -150# drain fitting 3" triclamp sight glass in lid 3" triclamp charge port in lid 1" NPT half coupling Optional Features: Vacuum Internal pressure Jacket for heating and cooling Insulation Temperature probe Pressure sensors Batch Sensors Explosion proof Food grade finishes Complete batch control system Increased clearance to the floor 316ss wetted Full customization available for this double shaft mixer

5HP Dual Shaft Disperser With 10 Gallon Vessel

5HP Dual Shaft Disperser With 10 Gallon Vessel

DS0010ASAANS $24,483

Download the Dual Shaft spec sheet Standard Features: Airlift with pendant controls (50 gals or less) Lift and vessel safety limit switches 304ss interchangable mix vessel with flat bottom, fork truck channels, and casters. 304ss lid with dust seal Vessel locating and locking retaining bracket All interior welds of the twin shaft mixer vessel are ground smooth for cleanability Multi member nylon scrapers The twin shaft mixer has independent motor, drive, and control systems for low and high speed shaft Fittings: 2" -150# drain fitting 3" triclamp sight glass in lid 3" triclamp charge port in lid 1" NPT half coupling Optional Features: Vacuum Internal pressure Jacket for heating and cooling Insulation Temperature probe Pressure sensors Batch Sensors Explosion proof Food grade finishes Complete batch control system Increased clearance to the floor 316ss wetted Full customization available for this twin shaft mixer

4 HP Air Gear Drive Sealed Bung Mount Mixer

4 HP Air Gear Drive Sealed Bung Mount Mixer

BUG400AGD-S $2,998

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The air powered gear driven mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each barrel agitator mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

30HP Dual Shaft Disperser With 300 Gallon Vessel

30HP Dual Shaft Disperser With 300 Gallon Vessel

DS0200OSAANA $86,250

Download the Dual Shaft spec sheet Standard Features: Air over oil with oil reservoir and pendant controls (50 gals or more) Lift and vessel safety limit switches 304ss interchangable mix vessel with flat bottom, fork truck channels, and casters. 304ss lid with dust seal Vessel locating and locking retaining bracket All interior welds ground smooth for cleanability Multi member nylon scrapers Independant motor, drive, and control systems for low and high speed shaft Fittings: 2" -150# drain fitting 3" triclamp sight glass in lid 3" triclamp charge port in lid 1" NPT half coupling Optional Features: Vacuum Internal pressure Jacket for heating and cooling Insulation Temperature probe Pressure sensors Batch Sensors Explosion proof Food grade finishes Complete batch control system Increased clearance to the floor 316ss wetted Full customization available

20 HP Dual Shaft Disperser With 200 Gallon Vessel

20 HP Dual Shaft Disperser With 200 Gallon Vessel

DS0200OSAANS $69,000

Download the Dual Shaft spec sheet Standard Features: Air over oil with oil reservoir and pendant controls (50 gals or more) Lift and vessel safety limit switches 304ss interchangable mix vessel with flat bottom, fork truck channels, and casters. 304ss lid with dust seal Vessel locating and locking retaining bracket All interior welds of the dual shaft mixer vessel are ground smooth for cleanability Multi member nylon scrapers The dual shaft mixer has independent motor, drive, and control systems for low and high speed shaft Fittings: 2" -150# drain fitting 3" triclamp sight glass in lid 3" triclamp charge port in lid 1" NPT half coupling Optional Features: Vacuum Internal pressure Jacket for heating and cooling Insulation Temperature probe Pressure sensors Batch Sensors Explosion proof Food grade finishes Complete batch control system Increased clearance to the floor 316ss wetted Full customization available for this dual shaft mixer

15HP Dual Shaft Disperser With 100 Gallon Vessel

15HP Dual Shaft Disperser With 100 Gallon Vessel

DS0100OSAANS $52,800

Download the Dual Shaft spec sheet Standard Features: Air over oil with oil reservoir and pendant controls (50 gals or more) Lift and vessel safety limit switches 304ss interchangable mix vessel with flat bottom, fork truck channels, and casters. 304ss lid with dust seal Vessel locating and locking retaining bracket All interior welds of the multi-shaft mixer vessel are ground smooth for cleanability Multi member nylon scrapers The multi-shaft mixer has independent motor, drive, and control systems for low and high speed shaft Fittings: 2" -150# drain fitting 3" triclamp sight glass in lid 3" triclamp charge port in lid 1" NPT half coupling Optional Features: Vacuum Internal pressure Jacket for heating and cooling Insulation Temperature probe Pressure sensors Batch Sensors Explosion proof Food grade finishes Complete batch control system Increased clearance to the floor 316ss wetted Full customization available for this multi-shaft mixer

10HP Dual Shaft Disperser With 50 Gallon Vessel

10HP Dual Shaft Disperser With 50 Gallon Vessel

DS0050ASAANS $36,729

Download the Dual Shaft spec sheet Standard Features: Airlift with pendant controls (50 gals or less) Lift and vessel safety limit switches 304ss interchangable mix vessel with flat bottom, fork truck channels, and casters. 304ss lid with dust seal Vessel locating and locking retaining bracket All interior welds of the twin shaft disperser vessel are ground smooth for cleanability Multi member nylon scrapers The twin shaft disperser has independent motor, drive, and control systems for low and high speed shaft Fittings: 2" -150# drain fitting 3" triclamp sight glass in lid 3" triclamp charge port in lid 1" NPT half coupling Optional Features: Vacuum Internal pressure Jacket for heating and cooling Insulation Temperature probe Pressure sensors Batch Sensors Explosion proof Food grade finishes Complete batch control system Increased clearance to the floor 316ss wetted Full customization available for this twin shaft disperser

1/2 HP Variable Speed Gear Drive Sealed Bung Mount

1/2 HP Variable Speed Gear Drive Sealed Bung Mount

BUG050VGD-S $2,624

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

1/2 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

BUG050VDD-S $2,013

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Explosion Proof Gear Drive Sealed Bung Mount

1/2 HP Explosion Proof Gear Drive Sealed Bung Mount

BUG050XGD-S $2,437

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1/2 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG050XDD-S $1,826

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1/2 HP Electric Gear Drive Sealed Bung Mount Mixer

1/2 HP Electric Gear Drive Sealed Bung Mount Mixer

BUG050EGD-S $1,879

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Air Gear Drive Sealed Bung Mount Mixer

1.5 HP Air Gear Drive Sealed Bung Mount Mixer

BUG150AGD-S $2,681

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Variable Speed Gear Drive Sealed Bung Mount Mixer

1 HP Variable Speed Gear Drive Sealed Bung Mount Mixer

BUG100VGD-S $3,025

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Electric Gear Drive Sealed Bung Mount Mixer

1 HP Electric Gear Drive Sealed Bung Mount Mixer

BUG100EGD-S $2,218

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.