Gearboxes

Free Resources

Download Catalog
3/8" Bore Bolt-on Hub

3/8" Bore Bolt-on Hub

HUBDBL037-037 $84

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 3/8" bore and a 1" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

Stirrer Stand, 48” Height, Heavy Duty

Stirrer Stand, 48” Height, Heavy Duty

SSD48SPSD $293

Heavy duty stand that can support the larger motors necessary for heavy viscosity lab applications. The 5/8" stainless ground and polished vertical rod allows accessories to move smoothly along the length of this heavy-duty mixer stand.

Portable Mount Mixer Stand, Winch Lift

Portable Mount Mixer Stand, Winch Lift

MXSP80WIN $1,654

Especially designed to increase throughput, the Electric lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The winch lift includes a bidirectional brake for safe lowering and raising the mixer. A seven-and-a-half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All non-wear surfaces on this heavy-duty mixer lift are powder coated to ensure longevity and corrosion resistance. The heavy-duty mixer lift mobile stand is designed with two rigid and two locking casters.

5/8" Bore Bolt-on Hub

5/8" Bore Bolt-on Hub

HUBDBL075-062 $115

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 5/8" bore and a 3/4" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

Stirrer Stand, 32” Height, Heavy Duty

Stirrer Stand, 32” Height, Heavy Duty

SSD32SPSD $261

Heavy duty stand that can support the larger motors necessary for heavy viscosity lab applications. The 5/8" stainless ground and polished vertical rod allows accessories to move smoothly along it's length.

Stirrer Stand, 36” Height, Economy

Stirrer Stand, 36” Height, Economy

SSD36ECNO $146

Sturdy, but inexpensive stand works for most lab applications. The base of this industrial mixer stand is 10" X 10" and powder coated for lasting durability. Stainless 5/8" ground and polished upright for smooth operation.

3/8" Dia, 316SS Mixer Shafting

3/8" Dia, 316SS Mixer Shafting

SHF037006 $21

Precision machined shafting for liquid, shaft based agitators. This steel polished agitator shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

Stirrer Stand, 28” Height, Economy

Stirrer Stand, 28” Height, Economy

SSD28ECNO $125

Sturdy, but inexpensive stand works for most lab applications. The base of this overhead stirrer mount is 10" X 10" and powder coated for lasting durability. Stainless 5/8" ground and polished upright for smooth operation.

Portable Mount Mixer Stand, Manual Lift

Portable Mount Mixer Stand, Manual Lift

MXSP80MAN $1,086

Specially designed to increase throughput, the Manual lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The manual lift system allows for the operator lift the mixer to the desired height and pin it in place. A seven-and-a-half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self-baffling a non-baffled tank or drum. All non-wear surfaces on this manual lift system are powder coated to ensure longevity and corrosion resistance. The mobile stand is designed with two rigid and two locking casters.

1/4" Dia, 316SS Mixer Shafting

1/4" Dia, 316SS Mixer Shafting

SHF025006 $17

Precision machined shafting for liquid, shaft based agitators. This steel polished agitator shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

5/8" Dia, 316SS Mixer Shafting

5/8" Dia, 316SS Mixer Shafting

SHF062006 $27

Precision machined shafting for liquid, shaft based agitators. This steel polished agitator shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

3/8" Dispersion Blade Adapter Washer

3/8" Dispersion Blade Adapter Washer

BAW375-250 $19

The Dispersion Blade Adapter Washer allows both 1/4" and 3/8" dispersion blades to be fitted on a 1/4" blade adapter. The washer secures the 3/8" center of a larger dispersion blade tightly against the 1/4" shaft, eliminating the need to additionally switch both shaft and blade when changing applications.

Stirrer Stand, 18” Height, Economy

Stirrer Stand, 18” Height, Economy

SSD18ECNO $104

Sturdy, but inexpensive stand works for most lab applications. The base of this industrial stirrer mount is 10" X 10" and powder coated for lasting durability. Stainless 5/8" ground and polished upright for smooth operation.

Stationary Mount Mixer Stand, Winch Lift

Stationary Mount Mixer Stand, Winch Lift

MXSS80WIN $1,069

Specially designed to increase throughput, the hand winch lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The hand winch lift includes a bidirectional brake for safe lowering and raising the mixer. A seven-and-a-half degree pitch on the clamp surface optimizes the mixer's entry angle to assist in self-baffling a non-baffled tank or drum. All non-wear surfaces of the hand crank winch lift are powder coated to ensure longevity and corrosion resistance. The stationary stand must be anchored for correct operation.

1/2" Bore Bolt-on Hub

1/2" Bore Bolt-on Hub

HUBDBL075-050 $115

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1/2" bore and a 1.5" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1" Bore Bolt-on Hub

1" Bore Bolt-on Hub

HUBDBL100-100 $161

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1" bore and a 2.5" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

Stationary Mount Mixer Stand, Manual Lift

Stationary Mount Mixer Stand, Manual Lift

MXSS80MAN $501

Especially designed to increase throughput, the Manual lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The manual lifts allows for the operator lift the mixer to the desired height and pin it in place. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All of the winch lift system's non-wear surfaces are powder coated to ensure longevity and corrosion resistance.

3/4" Bore Bolt-on Hub

3/4" Bore Bolt-on Hub

HUBDBL075-075 $115

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 3/4" bore and a 1.5" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1/4" Bore Bolt-on Hub

1/4" Bore Bolt-on Hub

HUBDBL037-025 $84

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1/4" bore and a 1" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

3/8" Dia. Dispersion Blade Adapter Shaft

3/8" Dia. Dispersion Blade Adapter Shaft

BAS037006 $49

Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct's turned and threaded 3/8" shaft adapter allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This blade adapter shaft is 3/8" in diameter with a 1/4" thread.

1/2" Dia, 316SS Mixer Shafting

1/2" Dia, 316SS Mixer Shafting

SHF050006 $27

Precision machined shafting for liquid, shaft based agitators. This steel polished agitator shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

Stirrer Stand, 24” Height, Heavy Duty

Stirrer Stand, 24” Height, Heavy Duty

SSD24SPSD $240

Heavy duty stand that can support the larger motors necessary for heavy viscosity lab applications. The 5/8" stainless ground and polished vertical rod allows accessories to move smoothly along the length of this industrial stirrer stand.

Stationary Mount Mixer Stand, Air Lift

Stationary Mount Mixer Stand, Air Lift

MXSS80AIR $1,671

Especially designed to increase throughput, the air lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The air lift is appropriate for use in any environment where electric service is unavailable or inadvisable. Many customers also choose this air powered lift option to take advantage of the double acting air cylinder, allowing for a controlled raising AND lowering of the mixer. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self-baffling a non-baffled tank or drum. All non-wear surfaces on this air powered lift are powder coated to ensure longevity and corrosion resistance. The stationary stand is designed to be anchored to a floor surface.

Portable Mount Mixer Stand, Electric Lift

Portable Mount Mixer Stand, Electric Lift

MXSP80ELE $2,086

Especially designed to increase throughput, the Electric lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The electric lift include a wired remote control to move the mixer into and out of mixing position. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All of the portable mixer stand's non-wear surfaces are powder coated to ensure longevity and corrosion resistance. The mobile stand is designed with two rigid and two locking casters.

Portable Mount Mixer Stand, Air Lift

Portable Mount Mixer Stand, Air Lift

MXSP80AIR $2,256

Especially designed to increase throughput, the air lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The air lift is appropriate for use in any environment where electric service is unavailable or inadvisable. Many customers also choose this mixer stand lift option to take advantage of the double acting air cylinder, allowing for a controlled raising AND lowering of the mixer. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All non-wear surfaces are powder coated to ensure longevity and corrosion resistance on this mixer stand lift. The mobile stand is designed with two rigid and two locking casters.

DP Safety Switch-Container

DP Safety Switch-Container

DPESAFCNT $248

Mixer Direct's line of dispersers have many available safety options. The DP Container Safety Sensor Package shuts off disperser motor when the vessel disengages with Container Holder. The sensor is integrated directly into the VFD to ensure the safety of the operator. The safety package is setup and tested at the factory prior to shipment.

Stiffening Plates for 8" Blade

Stiffening Plates for 8" Blade

STFDBL008 $274

Stiffening Plates provide strength and durability for large high shear dispersion blades. The fabricated industrial stiffening plates provide support to the dispersion blade and increase blade life by decreasing localized stress on the blade. The stiffening plate assembly contains two 4" stiffening plates to sandwich an 8" dispersion blade and can be bored to match any size center hole. Dispersion blade, shaft, and hub as shown in picture are sold separately

Stationary Mount Mixer Stand, Electric Lift

Stationary Mount Mixer Stand, Electric Lift

MXSS80ELE $1,501

Especially designed to increase throughput, the Electric lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The electric lift include a wired remote control to move the mixer into and out of mixing position. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All of the mixer machine stand's non-wear surfaces are powder coated to ensure longevity and corrosion resistance.

1.5" Bore Bolt-on Hub

1.5" Bore Bolt-on Hub

HUBDBL150-150 $446

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1.5" bore and a 3" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1/2" Dia. Dispersion Blade Adapter Shaft

1/2" Dia. Dispersion Blade Adapter Shaft

BAS037006 $69

Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct's turned and threaded 1/2" shaft adapter allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This blade adapter shaft is 1/2" in diameter with a 1/4" thread.

5/16" Dia, 316SS Mixer Shafting

5/16" Dia, 316SS Mixer Shafting

SHF031006 $17

Precision machined shafting for liquid, shaft based agitators. This steel polished agitator shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

Explosion Proof Safety Switch-Lift

Explosion Proof Safety Switch-Lift

DPXSAFLFT $994

Mixer Direct's line of explosion proof dispersers have many available safety options. The Explosion Proof DP Lift Safety Sensor Package shuts off disperser motor when the mixer head is raised. The sensor is integrated directly into the VFD to ensure the safety of the operator. The safety package is setup and tested at the factory prior to shipment. Mixer Direct will provide a wiring diagram with shipment. The customer is responsible for providing suitable XP wiring onsite.

DP Safety Switch-Lift

DP Safety Switch-Lift

DPESAFLFT $248

Mixer Direct's line of dispersers have many available safety options. The DP Lift Safety Sensor Package shuts off disperser motor when the mixer head is raised. The safety pressure, shut-off switch sensor is integrated directly into the VFD to ensure the safety of the operator. The safety package is setup and tested at the factory prior to shipment.

Bearing Safety Cover

Bearing Safety Cover

DP2BRGSHD $248

Mixer Direct's line of dispersers have many available safety options, such as the bearing safety end cap. The DP2 Top Bearing Safety Cover bolts over top bearing to reduce risk to the operator while running the disperser.

5/16" Bore Bolt-on Hub

5/16" Bore Bolt-on Hub

HUBDBL037-031 $84

Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 5/16" bore and a 1" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1 & 3 Gallon Dual Shaft Temperature Readout Package

1 & 3 Gallon Dual Shaft Temperature Readout Package

DSM1-TEMPDIS $1,273

An add-on package for temperature readout on 1 & 3 gallon dual shaft mixers. Can be mounted with included pivot brackets or free standing on a counter or cart. For use in safe areas only. Requires 110-220V Power. IP65 Enclosure Protection. Includes: 9 ft. power and signal cords 1/4" NPT 1000ohm RTD for installation in bottom head thermowell NEMA 1-15P Cord  

1 & 3 Gallon Dual Shaft Mixer Portable Cart

1 & 3 Gallon Dual Shaft Mixer Portable Cart

DSM1-CART $1,920

A portable cart with four (4) locking swivel casters designed to hold the 1 or 3 gallon dual shaft mixer. 1000lb. weight capacity. Removable handle for compact locations. Bolt holes and hardware included for mounting dual shaft mixer to top shelf. Lower shelf for storage only.

1 & 3 Gallon Dual Shaft E-Stop Package

1 & 3 Gallon Dual Shaft E-Stop Package

DSM1-ESTOP208 $450

A safety mechanism to quickly shut off power to a dual shaft mixer in situations where the unit cannot be shut down in its usual manner. Designed to be mounted in a safe area only. Includes 2m of M12 cable. Available in 208V, 240V, and 480V.

1/4" Dia. Dispersion Blade Adapter Shaft

1/4" Dia. Dispersion Blade Adapter Shaft

BAS025006 $49

Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct's turned and threaded 1/4" shaft adapter allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This blade adapter shaft is 1/4" in diameter with a 1/4" thread.

1" Dia, 316SS Mixer Shafting

1" Dia, 316SS Mixer Shafting

SHF100006 $63

Precision machined shafting for liquid, shaft based agitators. This steel polished agitator shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

3/4" Dia, 316SS Mixer Shafting

3/4" Dia, 316SS Mixer Shafting

SHF075006 $54

Precision machined shafting for liquid, shaft based agitators. This steel polished agitator shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.