High Shear Mixers

Proper dispersion requires a high shear mixer that is appropriately sized for the vessel and the constituents you are blending together. Mixer Direct makes this process simple. Just divide the number of gallons you are dispersing by 10 and find the correct disperser by horsepower below. Each model has been optimized dimensionally to fit your application around that one design constraint. This increases the speed we can get a dissolver to you and decreases the price. Many times we are twice the speed of our competition! 

Contact Us

Mixer Directs DP line of high-shear dispersers has the flexibility to handle container sizes from 1 quart to 1000 gallons. Each high speed disperser is equipped with a precision ground shaft and balanced blade for years of outstanding service. Mixer Direct emulsifiers are equipped with various lift packages make it simple to change out batches increasing throughput and profitability. Explosion proof units operate in hazardous locations safely and include local control panels as a standard on all units. Options include container holders, blending shrouds, and multi-shaft mixers. Mixer Direct can also put a very economical tank and disperser package together that allows you to buy your entire system from one place. Call our sales engineers today if you have any questions about our high shear mixers for sale (812) 202-4047.

Horsepower

Motor Type

Shaft Diameter

Impeller Diameter

Enclosure Type

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,997

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

explosion proof high shear disperser

1.5HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1015XDA $5,065

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside...

Electric High Shear Disperser

1HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2010VBA $3,660

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...