30HP Dual Shaft Disperser With 300 Gallon Vessel
30HP Dual Shaft Disperser With 300 Gallon Vessel
30HP Dual Shaft Disperser With 300 Gallon Vessel
30HP Dual Shaft Disperser With 300 Gallon Vessel
30HP Dual Shaft Disperser With 300 Gallon Vessel

30HP Dual Shaft Disperser With 300 Gallon Vessel

Default Title
Lead Time: 12 weeks $75,033
Customize Item

Details

Download the Dual Shaft spec sheet Standard Features: Air over oil with oil reservoir and pendant controls (50 gals or more) Lift and vessel safety limit switches 304ss interchangable mix vessel with flat bottom, fork truck channels, and casters. 304ss lid with dust seal Vessel locating and locking retaining bracket All interior welds ground smooth for cleanability Multi member nylon scrapers Independant motor, drive, and control systems for low and high speed shaft Fittings: 2" -150# drain fitting 3" triclamp sight glass in lid 3" triclamp charge port in lid 1" NPT half coupling Optional Features: Vacuum Internal pressure Jacket for heating and cooling Insulation Temperature probe Pressure sensors Batch Sensors Explosion proof Food grade finishes Complete batch control system Increased clearance to the floor 316ss wetted Full customization available

Have a question?

Download Specs Sheet

Specifications

  • Item Number DS0200OSAANA
  • Air Lift Requirement 80PSI@1CFM
  • Blade Attachment Bolt 5/8/11
  • Bottom Head Flat
  • Bottom Head Fitting 1" Female NPT Half Coupling
  • Bottom Head Thickness 10 Ga
  • Enclosure Type IP55
  • External Material 304SS
  • External Surface Finish 2B
  • Gearbox Yes
  • Gearbox Enclosure Painted Steel
  • Gearbox Ratio 44.9
  • Gear Type Helical
  • Helical Diameter 44 in
  • Helical HP 15 HP
  • Helical RPM 15-39
  • Helical Seal Lip
  • Horsepower 30
  • Impeller Attachment bolt-on
  • Impeller Diameter 14 in
  • Impeller Material 304SS
  • Impeller Type Dispersion Blade
  • Lid Type Dish
  • Lift Height 48 in
  • Lift Type Air over Oil
  • Max Current 55.8 A
  • Motor Type TEFC
  • Mount Post
  • Number of Impellers 1
  • Outer Diameter 46 in
  • Phase 3
  • RPM 700-1400
  • Scrapers Yes
  • Seal Yes
  • Seal Material VIton
  • Seal Type Lip
  • Shaft Attachment Integrated
  • Shaft Diameter 2 in
  • Shaft Length 48 in
  • Shaft Material 316SS
  • Speed Controller Yes
  • Tank Mounting Options Casters
  • Top Head Lid
  • Top Head Fitting 1 1" Female NPT Half Coupling
  • Top Head Thickness 10 Ga
  • Total Height Lowered 80in
  • Total Height Raised 147 in
  • Total Height 59 in
  • Total Volume 353 gal
  • Voltage 460 V
  • Volume 300 gal
  • Wetted Material 304SS
  • Wetted Surface Finish 2B-G

Related Products

| View all
electric high shear disperser

1.5HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1015VDA $3,077

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers. As...

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,997

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,170

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

Air Powered Disperser

3/4HP Air Lab Bench Disperser for up to 5 Gal Containers with Manual Lift

DP1008ADM $1,721

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to a 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion mixer blade change out lets the operator quickly tune in a process, using different size dispersion bladesor even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. There is no need to remove the shaft between runs, just slide out the lock pin and lift the telescoping slide. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...