
2" Axial Flow Turbine Impeller with 3/8" Bore
316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this axial mixing blade allows a mixer to the break up agglomeration and impart solids effectively. These axial mixing blades will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 2" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

Ultra Shear Dispersion Blade, 2in Dia, 1/4in CH
Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear 304 stainless steel blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

2" Lab Hydrofoil w/ 3/8" Bore
These impeller stirrer blades are made with 316L Stainless Steel. High pumping per horsepower. Low shear.

Dispersion Blade, 2in Dia, 1/4in CH
Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

2" Lab Hydrofoil w/ 5/16" Bore
316L Stainless Steel. High pumping per horsepower. Low shear stainless-steel rotor.

Ultra Shear Dispersion Blade, 2in Dia, 3/8in CH
Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear Blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

Dispersion Blade, 2in Dia, 3/8in CH
Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

2" Radial Flow Lab Impeller w/ 3/8" Bore
The Radial flow turbine creates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow of this stainless-steel turbine impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers. Mixer Direct's Lab Radial Flow, Stainless-Steel Turbine features a 2" blade, a 3/8" bore, and a hub with set screw attachment for easy blade installment.