Inline Rotor Stator

Free Resources

Download Catalog
40 HP ShearPro 20 Inline Rotor Stator Explosion Proof

40 HP ShearPro 20 Inline Rotor Stator Explosion Proof

IRSSP1020-40XP $40,900

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 3”/ 2.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 40 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM= Hastelloy C4G = 316 Stainless Steel  

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,997

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,170

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

electric high shear disperser

1.5HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1015VDA $3,077

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Electric High Shear Disperser

2HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020VBA $3,830

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Air Powered Disperser

3/4HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1008ADA $2,499

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

explosion proof high shear disperser

1.5HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1015XDA $5,065

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside...

Explosion Proof High Shear Disperser

5HP DP3 Explosion Proof High Speed Disperser with Air Lift

DP3050XBA $9,017

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Air Powered Disperser

4HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1040ADA $3,029

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to a 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air...

Air Powered disperser

4HP Air High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2040ABA $3,623

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by the included precision needle valve to meter the air flow to the...

Air Powered Disperser

1.5HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1015ADA $2,799

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Electric High Speed Disperser

7.5HP DP3 Electric High Speed Disperser with Air Lift

DP3075VBA $7,667

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are...

Electric High Speed Disperser

5HP DP3 Electric High Speed Disperser with Air Lift

DP3050VBA $7,080

For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 electric high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. // For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 50 Gal batch would normally require 5 HP to disperse. The dimensions on the high shear mixer allow for...

Electric High Shear Disperser

3HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2030VBA $4,340

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Electric High Shear Disperser

10HP DP4 Electric High Speed Explosion Proof Disperser with Air over Oil Lift

DP4100XBO $14,375

For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. // For high speed dispersing there is no better value than the DP4 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 48” lift and a 40” diameter vessel. The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out...

Electric High Shear Disperser

1.5HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2015VBA $3,740

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Electric High Shear Disperser

3HP Explosion Proof Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2030XBA $6,398

•Motor: 3 HP XPFC Explosion Proof Electric Motor, Class 1, Division 1, Group D Note: Customer to provide suitable cabling and conduit between the VFD, local controller and electric motor. Mixer Direct will provide wiring diagrams with the shipment.  Mount: DP2 post mount frame assembly w/ container holder, belt drive and sheave assembly. Lift: 24" air lift w/ joystick adjustable rate lift controls. Shaft: 1" diameter, turned ground and polished, 316ss, tapped threads for dispersion blade attachment. Impeller: (1) 5" diameter dispersion blade, 304ss, 3/8" center hole.

7.5 HP ShearPro 5 Inline Rotor Stator Stainless Steel

7.5 HP ShearPro 5 Inline Rotor Stator Stainless Steel

IRSSP1005-75SS $14,650

This inline Rotor Stator shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 1.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 7.5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

7.5 HP ShearPro 5 Inline Rotor Stator Explosion Proof

7.5 HP ShearPro 5 Inline Rotor Stator Explosion Proof

IRSSP1005-75XP $15,050

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 1.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 7.5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

7.5 HP ShearPro 5 Inline Rotor Stator

7.5 HP ShearPro 5 Inline Rotor Stator

IRSSP1005-75 $13,250

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 1.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 7.5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel

7.5 HP ShearPro 10 Inline Rotor Stator Stainless Steel

7.5 HP ShearPro 10 Inline Rotor Stator Stainless Steel

IRSSP1010-75SS $16,200

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 2”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 7.5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

7.5 HP ShearPro 10 Inline Rotor Stator Explosion Proof

7.5 HP ShearPro 10 Inline Rotor Stator Explosion Proof

IRSSP1010-75XP $16,300

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 2”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 7.5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

7.5 HP ShearPro 10 Inline Rotor Stator

7.5 HP ShearPro 10 Inline Rotor Stator

IRSSP1010-75 $14,400

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 2”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 7.5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

5 HP ShearPro 5 Inline Rotor Stator Stainless Steel

5 HP ShearPro 5 Inline Rotor Stator Stainless Steel

IRSSP1005-5SS $14,200

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 1.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

5 HP ShearPro 5 Inline Rotor Stator Explosion Proof

5 HP ShearPro 5 Inline Rotor Stator Explosion Proof

IRSSP1005-5XP $14,600

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 1.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

5 HP ShearPro 5 Inline Rotor Stator

5 HP ShearPro 5 Inline Rotor Stator

IRSSP1005-5 $12,800

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 1.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel

5 HP ShearPro 4 Inline Rotor Stator Stainless Steel

5 HP ShearPro 4 Inline Rotor Stator Stainless Steel

IRSSP1004-5SS $12,850

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 1.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel

5 HP ShearPro 4 Inline Rotor Stator Explosion Proof

5 HP ShearPro 4 Inline Rotor Stator Explosion Proof

IRSSP1004-5XP $13,350

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

5 HP ShearPro 4 Inline Rotor Stator

5 HP ShearPro 4 Inline Rotor Stator

IRSSP1004-5 $11,550

Inline Rotor Stator This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 5 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

40 HP ShearPro 20 Inline Rotor Stator

40 HP ShearPro 20 Inline Rotor Stator

IRSSP1020-40 $31,500

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 3”/ 2.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 40 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

30 HP ShearPro 20 Inline Rotor Stator Explosion Proof

30 HP ShearPro 20 Inline Rotor Stator Explosion Proof

IRSSP1020-30XP $39,100

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 3”/ 2.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 30 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

30 HP ShearPro 20 Inline Rotor Stator

30 HP ShearPro 20 Inline Rotor Stator

IRSSP1020-30 $29,700

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 3”/ 2.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 30 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

3 HP ShearPro 4L Inline Rotor Stator Stainless Steel

3 HP ShearPro 4L Inline Rotor Stator Stainless Steel

IRSSP1004-L3SS $10,600

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

3 HP ShearPro 4L Inline Rotor Stator Explosion Proof

3 HP ShearPro 4L Inline Rotor Stator Explosion Proof

IRSSP1004-L3XP $10,800

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

3 HP ShearPro 4L Inline Rotor Stator

3 HP ShearPro 4L Inline Rotor Stator

IRSSP1004-L3 $9,400

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

3 HP ShearPro 4 Inline Rotor Stator Stainless Steel

3 HP ShearPro 4 Inline Rotor Stator Stainless Steel

IRSSP1004-3SS $12,500

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

3 HP ShearPro 4 Inline Rotor Stator Explosion Proof

3 HP ShearPro 4 Inline Rotor Stator Explosion Proof

IRSSP1004-3XP $13,000

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

3 HP ShearPro 4 Inline Rotor Stator

3 HP ShearPro 4 Inline Rotor Stator

IRSSP1004-3 $11,200

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 3 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

25 HP ShearPro 20 Inline Rotor Stator Explosion Proof

25 HP ShearPro 20 Inline Rotor Stator Explosion Proof

IRSSP1020-25XP $38,000

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 3”/ 2.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 25 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

25 HP ShearPro 20 Inline Rotor Stator

25 HP ShearPro 20 Inline Rotor Stator

IRSSP1020-25 $28,600

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 3”/ 2.5”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 25 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

2 HP ShearPro 4L Inline Rotor Stator Stainless Steel

2 HP ShearPro 4L Inline Rotor Stator Stainless Steel

IRSSP1004-L2SS $10,400

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 2 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

2 HP ShearPro 4L Inline Rotor Stator Explosion Proof

2 HP ShearPro 4L Inline Rotor Stator Explosion Proof

IRSSP1004-L2XP $10,600

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 2 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

2 HP ShearPro 4L Inline Rotor Stator

2 HP ShearPro 4L Inline Rotor Stator

IRSSP1004-L2 $9,200

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 1”/ 0.75”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 2 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

15 HP ShearPro 10 Inline Rotor Stator Stainless Steel

15 HP ShearPro 10 Inline Rotor Stator Stainless Steel

IRSSP1010-15SS $18,000

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 2”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 15 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

15 HP ShearPro 10 Inline Rotor Stator Explosion Proof

15 HP ShearPro 10 Inline Rotor Stator Explosion Proof

IRSSP1010-15XP $18,010

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 2”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 15 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

15 HP ShearPro 10 Inline Rotor Stator

15 HP ShearPro 10 Inline Rotor Stator

IRSSP1010-15 $16,200

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 2”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 15 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

10 HP ShearPro 10 Inline Rotor Stator Explosion Proof

10 HP ShearPro 10 Inline Rotor Stator Explosion Proof

IRSSP1010-10XP $16,750

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 2”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 10 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): FKM Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1VMG, where: Q1 = Silicon Carbide V = FKM = Hastelloy C4G = 316 Stainless Steel  

10 HP ShearPro 10 Inline Rotor Stator

10 HP ShearPro 10 Inline Rotor Stator

IRSSP1010-10 $14,850

This inline shear pump includes the following features and options: Materials of Construction: All product contact parts of metal construction will be 316 Stainless Steel. Non-product contact parts will be painted with epoxy paint. Connections: Inlet/Outlet connections will be 2”/ 2”  Sanitary clamp, for fast and easy disassembly, and cleaning. Motor: Power: 10 hp, Voltage: 230/460V, Phase: 3, Frequency: 60 Hz, Nominal Speed: 34500 rpm, Inverter Duty: 2:1, Efficiency: Premium, Service Factor: 1.15. Static Seals (O-rings): TES (PTFE encapsulated Silicone). Dynamic Seal: Single mechanical, sanitary design, cartridge type for easy removal and assembly, balanced for longer life and better efficiency, materials of construction are Q1Q1KMG, where: Q1 = Silicon Carbide
K = FK
M = Hastelloy C4
G = 316 Stainless Steel