Mixers

Mixer Direct manufactures and sells mixing equipment to suit every conceivable mixing need. Our mixing machine designs are high quality and modular to permit rapid assembly of a wide variety from a large inventory of components. This translates into rapid turn-around for most mixer equipment orders. Our designs span the range from lab stirrers used for smaller or pre-mix applications to large top-entry tank mixer systems which handle several thousand gallons.

Contact Us

Our line of medium-sized portable drum mixers spans the widest range of mounting, power and impeller options with both economy and heavy duty systems available. These mixing machines can be paired with specially designed mounts and powered stands.

Free Resources

Download Catalog
1.5 HP Electric Gear Drive Tote Bracket Mount

1.5 HP Electric Gear Drive Tote Bracket Mount

TBM150EGD $2,496

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

4 HP Air Gear Drive Lightweight Tote Bracket

4 HP Air Gear Drive Lightweight Tote Bracket

TBE400AGD $2,560

Download the economy tote bracket air gear drive mixer tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1.5 HP Electric Gear Drive Lightweight Tote Bracket

1.5 HP Electric Gear Drive Lightweight Tote Bracket

TBE150EGD $2,250

Download the economy tote bracket electric gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1.5 HP Air Gear Drive Tote Bracket Mount

1.5 HP Air Gear Drive Tote Bracket Mount

TBM150AGD $2,470

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

4 HP Air Gear Drive Tote Bracket Mount

4 HP Air Gear Drive Tote Bracket Mount

TBM400AGD $2,842

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

TBM150VGD $3,956

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

sanitary tri clamp mixer

4 HP Air Gear Drive Tri-Clamp Mount Mixer

TCM400AGD $4,126

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these propeller agitators come equipped with stainless steel blades. A high-performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options for these propeller agitators including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

air gear drive heavy duty clamp mount

4 HP Air Gear Drive Heavy Duty Clamp Mount

HDC400AGD $4,162

Download The Heavy Duty Clamp Mount Air Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. Air motor driven mixers include a precision needle valve to control the speed.

3 HP Variable Speed Gear Drive Plate Mount

3 HP Variable Speed Gear Drive Plate Mount

PLT300VGD $5,425

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

TBM150XGD $3,113

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

4 HP Air Gear Drive Plate Mount

4 HP Air Gear Drive Plate Mount

PLT400AGD $4,514

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

4 HP Air Gear Drive Flange Mount with Viton Lip Seal

4 HP Air Gear Drive Flange Mount with Viton Lip Seal

FLG400AGD-S $4,574

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

4 HP Air Gear Drive Flange Mount

4 HP Air Gear Drive Flange Mount

FLG400AGD $4,374

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

variable speed gear drive heavy duty clamp mount

3 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC300VGD $5,102

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer includes a lower support bearing which takes the radial shaft load off of the motor/gearbox extending its longevity. Outstanding adjustability allows shaft positioning on two axes of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw-attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. The VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

3 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

FLG300VGD-S $5,473

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Variable Speed Gear Drive Flange Mount

3 HP Variable Speed Gear Drive Flange Mount

FLG300VGD $5,273

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Side Entry Mixer 14" Fluid Foil Impeller

3 HP Side Entry Mixer 14" Fluid Foil Impeller

SEM030ES14 $6,861

3 HP Side Entry Mixer Motor: 3 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 392 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 1.5” x 24" Exposed Length, 316SS, Turned Ground and Polished Impeller: 14'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

3 HP Explosion Proof Side Entry Mixer 14" Fluid Foil Impeller

3 HP Explosion Proof Side Entry Mixer 14" Fluid Foil Impeller

SEM030XS14 $7,833

3 HP Side Entry Mixer Motor: 3 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 392 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 180 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 1.5” x 24" Exposed Length, 316SS, Turned Ground and Polished Impeller: 14'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

3 HP Electric Gear Drive Plate Mount

3 HP Electric Gear Drive Plate Mount

PLT300EGD $4,091

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

electric gear drive heavy duty clamp mount

3 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC300EGD $3,725

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

3 HP Electric Gear Drive Flange Mount with Viton Lip Seal

3 HP Electric Gear Drive Flange Mount with Viton Lip Seal

FLG300EGD-S $4,157

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Electric Gear Drive Flange Mount

3 HP Electric Gear Drive Flange Mount

FLG300EGD $3,957

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1.5 HP Variable Speed Gear Drive Lightweight Tote Bracket

1.5 HP Variable Speed Gear Drive Lightweight Tote Bracket

TBE150VGD $3,556

Download the economy tote bracket variable gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1.5 HP Variable Speed Gear Drive Drum Bracket Mount

1.5 HP Variable Speed Gear Drive Drum Bracket Mount

DBM150VGD $3,956

Download the drum bracket mount variable gear drive tech sheet Drum Bracket Mixers unique design attaches to any standard metal 55 gallon drum. The drum bracket’s lightweight and sturdy construction allows mixing to be performed in the drum eliminating the need to transfer the product to another container. Mixer Direct’s Drum Bracket’s angled end plate provides a rigid mount to the 55 gallon drum allowing for more vigorous mixing. The electric gear drive has a 7.5:1 worm gear reduction and allows mixing from medium to high viscosities and comes equipped with (1) 14" axial flow turbine .The variable speed option allows precise speed control allowing you to get within 1% of your targeted RPM. Mixer Direct offers a unique baffle option to prevent vortexing and improve top to bottom mixing. Our customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1.5 HP Explosion Proof Electric Gear Drive Drum Bracket Mount

1.5 HP Explosion Proof Electric Gear Drive Drum Bracket Mount

DBM150XGD $3,113

Download the drum bracket mount explosion proof direct drive tech sheet Drum Bracket Mixers unique design attaches to any standard metal 55 gallon drum. The drum bracket’s lightweight and sturdy construction allows mixing to be performed in the drum eliminating the need to transfer the product to another container. Mixer Direct’s Drum Bracket’s angled end plate provides a rigid mount to the 55 gallon drum allowing for more vigorous mixing. The explosion proof electric gear drive mixer has a 7.5:1 worm gear reduction which allows mixing from medium to high viscosities and comes equipped with (1) 14" axial flow turbine .The explosion prof motor is rated Division I, Class I, Group D and can be used in locations with contain flammable gas or vapor. Mixer Direct offers a unique baffle option to prevent vortexing and improve top to bottom mixing. Our customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need. Note: Baffles shown in the picture are an optional and must be purchased separately.

1.5 HP Electric Gear Drive Drum Bracket Mount

1.5 HP Electric Gear Drive Drum Bracket Mount

DBM150EGD $2,496

Download The Drum Bracket Mount Electric Gear Drive Tech Sheet Drum Bracket Mixers unique design attaches to any standard metal 55 gallon drum. The drum bracket’s lightweight and sturdy construction allows mixing to be performed in the drum eliminating the need to transfer the product to another container. Mixer Direct’s Drum Bracket’s angled end plate provides a rigid mount to the 55 gallon drum allowing for more vigorous mixing. The electric gear drive have a 7.5:1 worm gear reduction which provides the torque to mix medium to high viscosities and comes equipped with (1) 14" Axial flow turbine . Mixer Direct offers a unique baffle option to prevent vortexing and improve top to bottom mixing. Our customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

top entry plate mount side view

1 HP Top Entry Plate Mount Mixer 5:1 Gearbox 14" High Efficiency Impeller

TPL010350 $2,554

Mixer Direct's Top Entry Mixers handle the largest mixing applications in the industry. This heavy duty mixer comes with a thick plate designed to bolt to the top of a frame or tank. These durable mixers come equipped with low shear dispersion blades capable of mixing high viscosity fluids. The 5:1 gearbox on this industrial mixer features a premium helical drive, a hollow shaft cover, and an oil sight glass. The top entry mixer comes equipped with a 1 HP electric motor and a 14” high efficiency impeller. The top entry mixer comes fitted with a 1" diameter shaft 37.5" long. Our customization options include longer shafts, multiple gear ratios, a range of motor horsepower, and varied impellers to encompass any mixing need. Download the TPL010350 Tech Sheet

top entry flange mount

1 HP Top Entry Flange Mount Mixer 5:1 Gearbox 14" High Efficiency Impeller

TFL010350 $3,014

Mixer Direct's Top Entry Mixers handle the largest mixing applications in the industry. Designed to bolt to the top of a frame or tank these durable mixers come equipped with low shear dispersion blades capable of mixing high viscosity fluids. The flange mixer's utility lies in its ability to attach to an existing connection. Mixer Direct can customize the flange to adapt to the ANSI flange for your application. The 5:1 gearbox on this industrial mixer features a premium helical drive, a hollow shaft cover, and an oil sight glass. The top entry mixer comes equipped with a 1 HP electric motor and a 14” high efficiency impeller. The 304 stainless steel flange comes with Teflon lip seals for optimal sealing power. The top entry mixer comes fitted with a 1" diameter shaft 37.5" long. Our customization options include longer shafts, multiple gear ratios, a range of motor horsepower, and varied impellers to encompass any mixing need. Download the TPL010350 Tech Sheet