Post Mount Rotor Stator

Rotor Stators are designed to generate the necessary force to break down solids, create emulsifications and suspensions, and homogenize a mixture with reduced mixing time and high energy output. High-Speed Rotor Stators are often used for top-selling products in the food, medical, and cosmetics industry and are essential for everyday life and the industries they serve. Check out our Post Mount Rotor Stators below or contact us for more information.

Horsepower

Motor Type

Impeller Diameter

10HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

10HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3100XBA $17,190

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

10HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

10HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3100VBA $15,118

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

5HP Explosion Proof Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3050XBA $14,517

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.

5HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

5HP Electric Post Mount Rotor Stator with Air Lift for up to 55 Gal Containers

RP3050VBA $12,580

For efficient high shear mixing in a 55-gallon drum, there is no better value than the RP3 post mount rotor stator. Whether you are mixing coatings, cosmetics, or just need extra shear to achieve a proper final solution, the RP3 rotor stator has the power you need to get the job done. Available in 5HP or 10HP TEFC or XPFC the RP3 can quickly achieve your process goals. With a 36” lift, the RP3 can handle a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the rotor stator to be placed at any position inside the mixing container. This is valuable if you will be mixing products of varying viscosities. The RP3 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability.The speed of the RP3 is easily controlled with a VFD with a digital readout to ensure proper operating speeds for your process. The RP3 operates at speeds from 0-3600 RPM. Customize your RP3 with container holders, greater speed ranges, and lift heights to optimize your processes to its fullest.