2 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

2 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS020FX-80-FDA $7,257

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 2 HP Raiden Plus Flange Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 2 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

2 HP Explosion Proof Raiden Plus Top Entry Plate Mount Mixer

2 HP Explosion Proof Raiden Plus Top Entry Plate Mount Mixer

RDNPLUS020PX-80 $6,683

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 2 HP Raiden Plus Plate Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 2 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

2 HP Explosion Proof Side Entry Mixer 13" Fluid Foil Impeller

2 HP Explosion Proof Side Entry Mixer 13" Fluid Foil Impeller

SEM020XS13 $8,232

2 HP Explosion Proof Side Entry Mixer Motor: 2 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 388 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 140 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 1.5” x 24" Exposed Length, 316SS, Turned Ground and Polished Impeller: 13'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

2 HP Raiden Plus Top Entry Flange Mount Mixer

2 HP Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS020F-80-FDA $6,545

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 2 HP Raiden Plus Flange Mount Mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 2 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

2 HP Raiden Plus Top Entry Plate Mount Mixer

2 HP Raiden Plus Top Entry Plate Mount Mixer

RDNPLUS020P-80 $5,971

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 2 HP Raiden Plus Plate Mount Mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 2 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

2 HP Side Entry Mixer 13" Fluid Foil Impeller

2 HP Side Entry Mixer 13" Fluid Foil Impeller

SEM020ES13 $7,348

2 HP Side Entry Mixer, 3 blade mixer. Motor: 2HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black Gearbox: 388 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 56 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 1.5” x 24" Exposed Length, 316SS, Turned Ground and Polished Impeller: 13'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

2 HP Variable Speed Direct Drive Flange Mount

2 HP Variable Speed Direct Drive Flange Mount

FLG200VDD $3,222

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Variable Speed Direct Drive Flange Mount with Viton Lip Seal

2 HP Variable Speed Direct Drive Flange Mount with Viton Lip Seal

FLG200VDD-S $3,427

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Variable Speed Direct Drive Plate Mount

2 HP Variable Speed Direct Drive Plate Mount

PLT200VDD $3,376

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Variable Speed Gear Drive Flange Mount

2 HP Variable Speed Gear Drive Flange Mount

FLG200VGD $4,296

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

2 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

FLG200VGD-S $4,501

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

2 HP Variable Speed Gear Drive Plate Mount

2 HP Variable Speed Gear Drive Plate Mount

PLT200VGD $4,450

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

20 HP Explosion Proof Side Entry Mixer 22" Fluid Foil Impeller

20 HP Explosion Proof Side Entry Mixer 22" Fluid Foil Impeller

SEM200XS22 $14,188

20 HP Explosion Proof Side Entry Mixer Motor: 20 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 378 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 210 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2” x 30" Exposed Length, 316SS, Turned Ground and Polished Impeller: 22'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

20 HP Side Entry Mixer 22" Fluid Foil Impeller

20 HP Side Entry Mixer 22" Fluid Foil Impeller

SEM200ES22 $13,067

20 HP Side Entry Mixer Motor: 20 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 378 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2” x 30" Exposed Length, 316SS, Turned Ground and Polished Impeller: 22'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

25 HP Explosion Proof Side Entry Mixer 22" Fluid Foil Impeller

25 HP Explosion Proof Side Entry Mixer 22" Fluid Foil Impeller

SEM250XS22 $19,825

25 HP Explosion Proof Side Entry Mixer Motor: 25 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 412 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 280 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 8" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2.5” x 34" Exposed Length, 316SS, Turned Ground and Polished Impeller: 22'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

25 HP Side Entry Mixer 22" Fluid Foil Impeller

25 HP Side Entry Mixer 22" Fluid Foil Impeller

SEM250ES22 $19,056

25 HP Side Entry Mixer Motor: 25 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 412 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 8" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 2.5” x 34" Exposed Length, 316SS, Turned Ground and Polished Impeller: 22'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

3 HP Electric Direct Drive Flange Mount

3 HP Electric Direct Drive Flange Mount

FLG300EDD $2,345

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Electric Direct Drive Flange Mount with Viton Lip Seal

3 HP Electric Direct Drive Flange Mount with Viton Lip Seal

FLG300EDD-S $2,550

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Electric Direct Drive Plate Mount

3 HP Electric Direct Drive Plate Mount

PLT300EDD $2,499

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Electric Gear Drive Flange Mount

3 HP Electric Gear Drive Flange Mount

FLG300EGD $4,138

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Electric Gear Drive Flange Mount with Viton Lip Seal

3 HP Electric Gear Drive Flange Mount with Viton Lip Seal

FLG300EGD-S $4,343

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Electric Gear Drive Plate Mount

3 HP Electric Gear Drive Plate Mount

PLT300EGD $4,292

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

3 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS030FX-80-FDA $9,363

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 3 HP Raiden Plus Flange Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 3 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

3 HP Explosion Proof Raiden Plus Top Entry Plate Mount Mixer

3 HP Explosion Proof Raiden Plus Top Entry Plate Mount Mixer

RDNPLUS030PX-80 $8,520

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 3 HP Raiden Plus Plate Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 3 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

3 HP Explosion Proof Side Entry Mixer 14" Fluid Foil Impeller

3 HP Explosion Proof Side Entry Mixer 14" Fluid Foil Impeller

SEM030XS14 $8,620

3 HP Side Entry Mixer Motor: 3 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2 Group E,F&G, Temp Code T3B, 20:1 Turndown, 230-460V/3Ph. Gearbox: 392 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, 180 C-Face NEMA Frame Adapter, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 1.5” x 24" Exposed Length, 316SS, Turned Ground and Polished Impeller: 14'' High Efficiency Fluidfoil, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

3 HP Raiden Plus Top Entry Flange Mount Mixer

3 HP Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS030F-80-FDA $8,628

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 3 HP Raiden Plus Flange Mount Mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 3 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

3 HP Raiden Plus Top Entry Plate Mount Mixer

3 HP Raiden Plus Top Entry Plate Mount Mixer

RDNPLUS030P-80 $7,785

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 3 HP Raiden Plus Plate Mount Mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 3 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

3 HP Side Entry Mixer 14" Fluid Foil Impeller

3 HP Side Entry Mixer 14" Fluid Foil Impeller

SEM030ES14 $7,562

3 HP Side Entry Mixer Motor: 3 HP, TEFC, 5:1 Turndown, 230-460V/3Ph, Severe Duty Coating, Black. Gearbox: 392 RPM, Premium Helical Drive, Hollow Shaft Cover, Oil Sight Glass, Integral Motor, Severe Duty Coating, Black, Mineral Lubricant. Control: None Mount: Flange Mount, 6" 150# 304SS ANSI Flange with CS Epoxy Coated Pedestal, SS Safety Shroud Seal: 316SS Single Mechanical Cartridge Seal w/ Viton O-ring Rotating Seal: Carbon Graphite Stationary Seal Ring: Sintered Silicon Carbide Springs: Hastelloy C-276 Maintenance Seal: Teflon Secondary Tank Seal for Mechanical Seal Change, Viton O-Ring, 316SS Collar Shaft: 1.5” x 24" Exposed Length, 316SS, Turned Ground and Polished Impeller: 14'' High Efficiency Fluid Foil impeller, 3 Blades, Low Shear, High Thrust, 304SS, Welded Blades, Bead Blasted Finish, Keyed with Set Screw Attachment, Safety Impeller Attachment

3 HP Variable Speed Direct Drive Flange Mount

3 HP Variable Speed Direct Drive Flange Mount

FLG300VDD $3,348

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Variable Speed Direct Drive Flange Mount with Viton Lip SEal

3 HP Variable Speed Direct Drive Flange Mount with Viton Lip SEal

FLG300VDD-S $3,553

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Variable Speed Direct Drive Plate Mount

3 HP Variable Speed Direct Drive Plate Mount

PLT300VDD $3,502

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Variable Speed Gear Drive Flange Mount

3 HP Variable Speed Gear Drive Flange Mount

FLG300VGD $5,141

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

3 HP Variable Speed Gear Drive Flange Mount with Viton Lip Seal

FLG300VGD-S $5,346

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3 HP Variable Speed Gear Drive Plate Mount

3 HP Variable Speed Gear Drive Plate Mount

PLT300VGD $5,295

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. VFD unit for variable speed will read out Hz and uses a membrane control pad.

3/4 HP Air Direct Drive Flange Mount

3/4 HP Air Direct Drive Flange Mount

FLG075ADD $1,738

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

3/4 HP Air Direct Drive Flange Mount with Viton Lip Seal

3/4 HP Air Direct Drive Flange Mount with Viton Lip Seal

FLG075ADD-S $1,943

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

3/4 HP Air Direct Drive Plate Mount

3/4 HP Air Direct Drive Plate Mount

PLT075ADD $1,892

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

3/4 HP Air Gear Drive Flange Mount

3/4 HP Air Gear Drive Flange Mount

FLG075AGD $2,701

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

3/4 HP Air Gear Drive Flange Mount with Viton Lip Seal

3/4 HP Air Gear Drive Flange Mount with Viton Lip Seal

FLG075AGD-S $2,906

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

3/4 HP Air Gear Drive Plate Mount

3/4 HP Air Gear Drive Plate Mount

PLT075AGD $2,855

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

3/4 HP Electric Direct Drive Flange Mount

3/4 HP Electric Direct Drive Flange Mount

FLG075EDD $2,000

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3/4 HP Electric Direct Drive Flange Mount with Viton Lip Seal

3/4 HP Electric Direct Drive Flange Mount with Viton Lip Seal

FLG075EDD-S $2,205

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3/4 HP Electric Direct Drive Plate Mount

3/4 HP Electric Direct Drive Plate Mount

PLT075EDD $2,154

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3/4 HP Electric Gear Drive Flange Mount

3/4 HP Electric Gear Drive Flange Mount

FLG075EGD $2,737

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3/4 HP Electric Gear Drive Flange Mount with Viton Lip Seal

3/4 HP Electric Gear Drive Flange Mount with Viton Lip Seal

FLG075EGD-S $2,942

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3/4 HP Electric Gear Drive Plate Mount

3/4 HP Electric Gear Drive Plate Mount

PLT075EGD $2,891

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

3/4 HP Explosion Proof Direct Drive Flange Mount

3/4 HP Explosion Proof Direct Drive Flange Mount

FLG075XDD $2,582

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

3/4 HP Explosion Proof Direct Drive Flange Mount with Viton Lip Seal

3/4 HP Explosion Proof Direct Drive Flange Mount with Viton Lip Seal

FLG075XDD-S $2,787

This line of mixers from MixerDirect attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. A high performance Viton Lip Seal allows for closed system mixing keeping dust and other particulates out of your process. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. Explosion Proof models are designed for rated areas.

mixers,industries