3HP DP3 Explosion Proof High Speed Disperser with Air Lift

Default Title
Lead Time: 3 weeks $14,095
Customize Item


For 55 Gal drum high speed dispersing there is no better value than the DP3 from Mixer Direct. Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP3 high speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear mixer allow for a 36” lift and a 40” diameter vessel. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP3 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are controlled by a local explosion proof controller that communicates with a digital speed controller that is mounted outside of the rated area. The speed range for this unit is 0-4000 RPM. A 1.5" 316SS shaft is standard on all DP3 units, precision ground and polished along its entire length for high speed mixer service. Customizations and options on these units include container holders, slower or faster speed ranges, explosion proof tachometers, and a variety of lift heights. As with all of our mixers, Mixer Direct is committed to best in the industry lead times. Please contact our sales engineers if you have any questions on sizing or expedited delivery (812) 202-4047.

Have a Question?

Download Specs Sheet


  • Item Number DP3030XBA
  • Air Lift Requirement 80PSI@1CFM
  • Blade Attachment Bolt 5/8/11
  • Enclosure Type Cl1-Div1-GrC,D
  • Horsepower 3
  • Impeller Attachment bolt-on
  • Impeller Diameter 5 in
  • Impeller Material 304SS
  • Impeller Type Dispersion Blade
  • Lift Height 36 in
  • Lift Type Air
  • Max Current 17.1 A
  • Max Vessel Height 38 in
  • Motor Type XP TEFC
  • Mount Post
  • Number of Impellers 1
  • Phase 3
  • RPM 400-4000
  • Shaft Attachment Integrated
  • Shaft Diameter 1.5 in
  • Shaft Length 36 in
  • Shaft Material 316SS
  • Speed Controller Yes
  • Throat Depth 19 in
  • Total Height Lowered 53in
  • Total Height Raised 89 in
  • Voltage 460 V