Electric High Shear Disperser
Electric High Shear Disperser

3HP Explosion Proof Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

Default Title
Lead Time: 3 weeks $6,398
Customize Item

Details

  • •Motor: 3 HP XPFC Explosion Proof Electric Motor, Class 1, Division 1, Group D
  • Note: Customer to provide suitable cabling and conduit between the VFD, local controller and electric motor. Mixer Direct will provide wiring diagrams with the shipment. 
  • Mount: DP2 post mount frame assembly w/ container holder, belt drive and sheave assembly.
  • Lift: 24" air lift w/ joystick adjustable rate lift controls.
  • Shaft: 1" diameter, turned ground and polished, 316ss, tapped threads for dispersion blade attachment.
  • Impeller: (1) 5" diameter dispersion blade, 304ss, 3/8" center hole.

Have a question?

Download Specs Sheet

Specifications

  • Item Number DP2030XBA
  • Air Lift Requirement 80PSI@1CFM
  • Blade Attachment Bolt 3/8/16
  • Enclosure Type NEMA 4X
  • Horsepower 3
  • Impeller Attachment bolt-on
  • Impeller Diameter 5 in
  • Impeller Material 304SS
  • Impeller Type Dispersion Blade
  • Lift Height 24 in
  • Lift Type Air
  • Max Current 13.3 A
  • Max Vessel Height 25 in
  • Motor Type XPFC
  • Mount Post
  • Number of Impellers 1
  • Phase 3
  • RPM 500-5000
  • Shaft Attachment Integrated
  • Shaft Diameter 1 in
  • Shaft Length 24 in
  • Shaft Material 316SS
  • Speed Controller Yes
  • Throat Depth 12.5 in
  • Total Height Lowered 35in
  • Total Height Raised 59 in
  • Voltage 230 V

Related Products

| View all
1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,997

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,170

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

electric high shear disperser

1.5HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1015VDA $3,077

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Electric High Shear Disperser

2HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020VBA $3,830

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...