Food and Beverage Industry

3/4 HP Air Stirrer w/ Chuck

3/4 HP Air Stirrer w/ Chuck

ASH075DCK $912

This Air Stirrer powerhead is ready to attach to your stand and get to work. With a 10" X 5/8" stainless rod ground and polished to mate flawlessly with the SCP062062, this motor assembly will fit most lab or small batch operations. Chuck will accept up to a 3/8" shaft. Air motor is equipped with a muffler and needle control valve.

1/2 HP Air Stirrer w/ Chuck

1/2 HP Air Stirrer w/ Chuck

ASH050DCK $775

This Air Stirrer powerhead is ready to attach to your stand and get to work. With a 10" X 5/8" stainless rod ground and polished to mate flawlessly with the SCP062062, this motor assembly will fit most lab or small batch operations. Chuck will accept up to a 3/8" shaft. Air motor is equipped with a muffler and needle control valve.

Raiden Standard 2 HP Plate Mount Top Entry Mixer

Raiden Standard 2 HP Plate Mount Top Entry Mixer

RDNSTD020P-80 $5,145

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard steel mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden mixer.  

Stationary Mount Mixer Stand, Winch Lift

Stationary Mount Mixer Stand, Winch Lift

MXSS80WIN $1,097

Specially designed to increase throughput, the hand winch lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The hand winch lift includes a bidirectional brake for safe lowering and raising the mixer. A seven-and-a-half degree pitch on the clamp surface optimizes the mixer's entry angle to assist in self-baffling a non-baffled tank or drum. All non-wear surfaces of the hand crank winch lift are powder coated to ensure longevity and corrosion resistance. The stationary stand must be anchored for correct operation.

3/4 HP Electric Gear Drive Lightweight Tote Bracket

3/4 HP Electric Gear Drive Lightweight Tote Bracket

TBE075EGD $2,482

Download the economy tote bracket electric gear drive tech sheet. Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

Air Direct Drive heavy duty clamp mount

3/4 HP Air Direct Drive Heavy Duty Clamp Mount

HDC075ADD-24 $1,900

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. Air motor driven mixers include a precision needle valve to control the speed.

1/3 HP Electric Direct Drive Drum Lid Mount

1/3 HP Electric Direct Drive Drum Lid Mount

DLM033EDD-28 $1,247

This drum lid mounted mixer is optimized for mixing in standard 55-gallon drums, offering low shear agitation and blending of your process fluids. The mixing shaft and impeller is constructed of 316 stainless steel, ensuring a high level of resistance to chemical attack. The carbon steel drum lid mounts securely to the drum with standard clamp rings commonly supplied with the 55-gallon drum. A left-handed propeller is included with the mixer, providing a significant amount of flow per horsepower.

1/2 HP Variable Speed Direct Drive Drum Clamp Mount

1/2 HP Variable Speed Direct Drive Drum Clamp Mount

DCM050VDD $1,987

Download The Drum Clamp Mount Variable Direct Drive. This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum clamp agitator comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/2 HP Electric Direct Drive Clamp Mount

1/2 HP Electric Direct Drive Clamp Mount

DCM050EDD $1,341

Download The Electric Direct Drive Tech Sheet. This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This clamp mount mixer machine comes standard with a 5/8” diameter 316SS shaft and (1) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1.5 HP Electric Gear Drive Lightweight Tote Bracket

1.5 HP Electric Gear Drive Lightweight Tote Bracket

TBE150EGD $2,730

Download the economy tote bracket electric gear drive tech sheet. Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1 HP Electric Direct Drive Heavy Duty Clamp Mount

1 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC100EDD-32 $2,098

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

1 HP Electric Direct Drive Drum Lid Mount

1 HP Electric Direct Drive Drum Lid Mount

DLM100EDD-28 $1,540

This drum lid mounted mixer is optimized for mixing in standard 55-gallon drums, offering low shear agitation and blending of your process fluids. The mixing shaft and impeller is constructed of 316 stainless steel, ensuring a high level of resistance to chemical attack. The carbon steel drum lid mounts securely to the drum with standard clamp rings commonly supplied with the 55-gallon drum. A high efficiency impeller (HEI) is included with the mixer, providing a significant amount of flow per horsepower.

1/2 HP Air Lab Package with Chuck

1/2 HP Air Lab Package with Chuck

LAB050DCK $1,431

Mixer Direct’s 1/2 HP Air Driven Lab Package comes complete with air motor, mixing stand, 3/8 shaft, coupling, 2” propeller, and chain clamp. With amazing capabilities for its size, the air driven mixer can be used in formulation, R&D, clinical research, education labs, anywhere a magnetic stirrer is used. It fits into small spaces and can be easily transported to other labs or classrooms. The air driven industrial mixer blender offers an economical speed control and the lab package contains everything needed to test mixing in a laboratory or small batch setting. Our laboratory impellers are designed to scale to full size blades simplifying the transfer from testing to full scale production. Mixer Direct offers a large range of impeller types and sizes to fulfill every mixing need.

Stirrer Stand, 18” Height, Economy

Stirrer Stand, 18” Height, Economy

SSD18ECNO $205

Sturdy, but inexpensive stand works for most lab applications. The base of this industrial stirrer mount is 10" X 10" and powder coated for lasting durability. Stainless 5/8" ground and polished upright for smooth operation.

4 HP Air Direct Drive Heavy Duty Clamp Mount

4 HP Air Direct Drive Heavy Duty Clamp Mount

HDC400ADD-24 $2,893

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these clamp-on-mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Air motor driven mixers include a precision needle valve to control the speed.

4 HP Air Direct Drive Drum Lid Mount

4 HP Air Direct Drive Drum Lid Mount

DLM400ADD-28 $2,269

This drum lid mounted mixer is optimized for mixing in standard 55-gallon drums, offering low shear agitation and blending of your process fluids. The mixing shaft and impeller is constructed of 316 stainless steel, ensuring a high level of resistance to chemical attack. The carbon steel drum lid mounts securely to the drum with standard clamp rings commonly supplied with the 55-gallon drum. A high efficiency impeller (HEI) is included with the mixer, providing a significant amount of flow per horsepower.

Electric Direct Drive Heavy Duty Clamp Mount

3/4 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC075EDD-32 $1,736

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

3/4 HP Air Direct Drive Tote Bracket Mount

3/4 HP Air Direct Drive Tote Bracket Mount

TBM075ADD $2,122

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

2 HP Electric Direct Drive Heavy Duty Clamp Mount

2 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC200EDD-32 $2,594

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

Explosion proof heavy duty clamp mount

1/3 HP Explosion Proof Direct Drive Heavy Duty Clamp Mount

HDC033XDD-32 $2,120

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Explosion Proof mixers are made for use in rated environments.

1/2 HP Variable Speed Direct Drive Bung Mount

1/2 HP Variable Speed Direct Drive Bung Mount

BUG050VDD-28 $1,896

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1/2 HP Explosion Proof Direct Drive Drum Lid Mount

1/2 HP Explosion Proof Direct Drive Drum Lid Mount

DLM050XDD-28 $1,867

This drum lid mounted mixer is optimized for mixing in standard 55-gallon drums, offering low shear agitation and blending of your process fluids. The mixing shaft and impeller is constructed of 316 stainless steel, ensuring a high level of resistance to chemical attack. The carbon steel drum lid mounts securely to the drum with standard clamp rings commonly supplied with the 55-gallon drum. A left-handed propeller is included with the mixer, providing a significant amount of flow per horsepower.

1/2 HP Electric Gear Drive Lightweight Tote Bracket

1/2 HP Electric Gear Drive Lightweight Tote Bracket

TBE050EGD $2,401

Download the economy tote bracket electric gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

sanitary tri clamp mixer

1/2 HP Electric Direct Drive Tri-Clamp Mount Mixer

TCM050EDD-24 $1,714

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mixer to fit any application. Just call one of our sales engineers or fill out a contact form!

1.0 HP Variable Speed Direct Drive Lightweight Tote Bracket

1.0 HP Variable Speed Direct Drive Lightweight Tote Bracket

TBE100VDD $2,656

Download the economy tote bracket variable speed drive tech sheet. Designed to mix IBC Totes ,the bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. Customization option include longer shafts, gear ratios, and varied impellers.

3/4 HP Air Stirrer w/ Coupler

3/4 HP Air Stirrer w/ Coupler

ASH075DCO $729

This Air Stirrer powerhead is ready to attach to your stand and get to work. With a 10" X 5/8" stainless rod ground and polished to mate flawlessly with the SCP062062, this motor assembly will fit most lab or small batch operations. Coupling will accept a 1/2" shaft. Air motor is equipped with a muffler and needle control valve.

Stationary Mount Mixer Stand, Manual Lift

Stationary Mount Mixer Stand, Manual Lift

MXSS80MAN $514

Especially designed to increase throughput, the Manual lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The manual lifts allows for the operator lift the mixer to the desired height and pin it in place. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All of the winch lift system's non-wear surfaces are powder coated to ensure longevity and corrosion resistance.

4 HP Air Gear Drive Tote Bracket Mount

4 HP Air Gear Drive Tote Bracket Mount

TBM400AGD $3,832

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

4 HP Air Gear Drive Heavy Duty Clamp Mount

4 HP Air Gear Drive Heavy Duty Clamp Mount

HDC400AGD-24 $3,377

Download The Heavy Duty Clamp Mount Air Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. Air motor driven mixers include a precision needle valve to control the speed.

3/4 HP Variable Speed Direct Drive Drum Lid Mount

3/4 HP Variable Speed Direct Drive Drum Lid Mount

DLM075VDD-28 $2,100

This drum lid mounted mixer is optimized for mixing in standard 55-gallon drums, offering low shear agitation and blending of your process fluids. The mixing shaft and impeller is constructed of 316 stainless steel, ensuring a high level of resistance to chemical attack. The carbon steel drum lid mounts securely to the drum with standard clamp rings commonly supplied with the 55-gallon drum. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower. Includes VFD with Hz readout and membrane touch speed control.

3/4 HP Air Direct Drive Drum Clamp Mount

3/4 HP Air Direct Drive Drum Clamp Mount

DCM075ADD $1,472

Download The Air Direct Drive Drum Clamp mount Tech Sheet This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1/3 HP Electric Direct Drive Plate Mount

1/3 HP Electric Direct Drive Plate Mount

PLT033EDD $1,772

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

1/2 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

1/2 HP Variable Speed Gear Drive Heavy Duty Clamp Mount

HDC050VGD-24 $3,262

Download The Heavy Duty Clamp Mount Variable Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. VFD unit for variable speed will read out Hz and uses a membrane control pad.

1/2 HP Explosion Proof Direct Drive Tote Bracket Mount

1/2 HP Explosion Proof Direct Drive Tote Bracket Mount

TBM050XDD $2,291

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1/2 HP Explosion Proof Direct Drive Bung Mount

1/2 HP Explosion Proof Direct Drive Bung Mount

BUG050XDD-28 $1,731

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The NPT bung mount mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1/2 HP Electric Gear Drive Tote Bracket Mount

1/2 HP Electric Gear Drive Tote Bracket Mount

TBM050EGD $3,003

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this IBC tote mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

Sanitary Tri Clamp Mount Mixer

1 HP Explosion Proof Electric Direct Drive Tri-Clamp Mount Mixer

TCM100XDD-24 $2,400

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Electric Direct Drive Drum Bracket Mount

1 HP Electric Direct Drive Drum Bracket Mount

DBM100EDD $1,889

Download the drum bracket mount electric direct drive tech sheet. Drum Bracket Mixers unique design attaches to any standard metal 55 gallon drum. The drum bracket’s lightweight and sturdy construction allows mixing to be performed in the drum eliminating the need to transfer the product to another container. Mixer Direct’s Drum Bracket’s angled end plate provides a rigid mount to the 55 gallon drum allowing for more vigorous mixing. The electric direct drive allows mixing from low to medium viscosities and comes equipped with (1) 5" Hydrofoil . Mixer Direct offers a unique baffle option to prevent vortexing and improve top to bottom mixing. Our customization options for this electric barrel inserted mixer include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

Electric High Shear Disperser

2HP Electric High Speed Disperser for up to 20 Gal Containers with Air Lift

DP2020VBA $5,144

The DP2 line from MixerDirect handles all of your dispersing needs from 5-20 Gals. Producing a high speed dissolver in this range of volume has traditionally been difficult to find as customers are directed to either a lab bench model or a large floor mount disperser. The new DP2 gives you access to a machine that is designed for this volume. With an 24" lift the DP2 high shear mixer can easily accommodate up to 20 Gal of material, and stay in a size that can still fulfill mixing in 1L beakers. The air lift moves smoothly in and out of position using a 3-way air valve, allowing the high speed dispersion blade to be positioned at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities. Changing out the blade on the DP2 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds are controlled by membrane touch screen that also includes an RPM readout for repeatable process...

Raiden Standard 5 HP Flange Mount Top Entry Mixer

Raiden Standard 5 HP Flange Mount Top Entry Mixer

RDNSTD050F-90 $6,696

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard flange mount mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden mixer.  

Stirrer Stand, 24” Height, Heavy Duty

Stirrer Stand, 24” Height, Heavy Duty

SSD24SPSD $369

Heavy duty stand that can support the larger motors necessary for heavy viscosity lab applications. The 5/8" stainless ground and polished vertical rod allows accessories to move smoothly along the length of this industrial stirrer stand.

Portable Mount Mixer Stand, Electric Lift

Portable Mount Mixer Stand, Electric Lift

MXSP80ELE $2,139

Especially designed to increase throughput, the Electric lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The electric lift include a wired remote control to move the mixer into and out of mixing position. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All of the portable mixer stand's non-wear surfaces are powder coated to ensure longevity and corrosion resistance. The mobile stand is designed with two rigid and two locking casters.

Portable Mount Mixer Stand, Air Lift

Portable Mount Mixer Stand, Air Lift

MXSP80AIR $2,314

Especially designed to increase throughput, the air lift stand allows for Mixer Direct clamp mount mixers to be moved vertically out of a tank or drum to position the next batch into place. The air lift is appropriate for use in any environment where electric service is unavailable or inadvisable. Many customers also choose this mixer stand lift option to take advantage of the double acting air cylinder, allowing for a controlled raising AND lowering of the mixer. A seven and a half degree pitch on the clamp surface optimizes the mixers entry angle to assist in self baffling a non-baffled tank or drum. All non-wear surfaces are powder coated to ensure longevity and corrosion resistance on this mixer stand lift. The mobile stand is designed with two rigid and two locking casters.

3/4 HP Explosion Proof Direct Drive Lightweight Tote Bracket

3/4 HP Explosion Proof Direct Drive Lightweight Tote Bracket

TBE075XDD $1,884

Download the economy tote bracket explosion proof direct drive tech sheet. Designed to mix IBC Totes, the bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. Customization option include longer shafts, gear ratios, and varied impellers.

3/4 HP Air Gear Drive Lightweight Tote Bracket

3/4 HP Air Gear Drive Lightweight Tote Bracket

TBE075AGD $2,402

Download the economy tote bracket air gear drive mixer tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization options for this IBC blender include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler.

3/4 HP Air Direct Drive Plate Mount

3/4 HP Air Direct Drive Plate Mount

PLT075ADD $1,892

The Plate Mount Mixer typically is bolted to two channels across the top of the tank. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application. The air motor package includes a muffler and a needle control valve.

2 HP Electric Gear Drive Heavy Duty Clamp Mount

2 HP Electric Gear Drive Heavy Duty Clamp Mount

HDC200EGD-44 $4,335

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

1/3 HP Electric Direct Drive Flange Mount

1/3 HP Electric Direct Drive Flange Mount

FLG033EDD $1,618

This line of mixers from Mixer Direct attaches to a 2.5”-150# ANSI flange. It is designed for heavy duty applications with an extra flange mounted support bearing and all welded construction. This mixer is highly customizable with multiple gear ratios, seal packages, flange sizes, impellers and shaft lengths for your application.

Food and Beverage Industry