Benchtop Shear Lab Mixers & Lab Dispersers

Newly released from Mixer Direct, the DP1 line of benchtop lab mixers and dispersers is one of the most economical and full featured disperser lines on the market. These high shear lab mixers can handle a wide range of volumes from 200 mL up to a 5 Gals.  The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range.  One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. For more options shop our full range of dispersers.

The DP1 high speed disperser line does not just perform well with the process, but is also easy to use.  Most models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix.  Controls for laboratory high shear mixers are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator.  Controls for the electric units are also ergonomically placed in the front of the unit with an RPM readout and sealed membrane buttons for liquid protection.

On the explosion proof benchtop lab mixers, a local controller is standard.  While our competitors still have you wear your wrist trying to turn a speed control pulley on the backside of the unit, we have supplied a local control station that communicates with our controller mounted outside of the rated area.

As with all of our mixers, Mixer Direct is committed to best in the industry lead times.  Most of our bench emulsifiers ship in 3 days or less.  Please contact our sales engineers if you have any questions on sizing or expedited delivery of our high shear lab mixers (812) 202-4047.

Horsepower

Speed Controller

Motor Type

Impeller Diameter

Lift Type

Enclosure Type

Phase

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $3,030

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,408

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

Air Powered Disperser

3/4HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1008ADA $2,499

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

explosion proof high shear disperser

1.5HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1015XDA $5,142

The DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside of the rated area. This...

Air Powered Disperser

1.5HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1015ADA $2,729

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air dissolvers....

Air Powered Disperser

4HP Air Lab Bench Disperser for up to 5 Gal Containers

DP1040ADA $3,029

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to a 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for air dissolver are in the front of the unit, with the exhaust piped to the rear of the unit to minimize noise and blowing against the operator. All of the DP1 air high shear mixers operate from 0-3000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of air...

2HP Explosion Proof Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

2HP Explosion Proof Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

RP1020XDA $7,185

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

3HP Electric Lab Post Mount Rotor Stator with Electric Lift for up to 5 Gal Containers

3HP Electric Lab Post Mount Rotor Stator with Electric Lift for up to 5 Gal Containers

RP1030VDE $5,411

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

2HP Electric Lab Post Mount Rotor Stator with Electric Lift for up to 5 Gal Containers

2HP Electric Lab Post Mount Rotor Stator with Electric Lift for up to 5 Gal Containers

RP1020VDE $5,146

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

3HP Electric Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

3HP Electric Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

RP1030VDA $5,223

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

2HP Electric Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

2HP Electric Lab Post Mount Rotor Stator with Air Lift for up to 5 Gal Containers

RP1020VDA $4,958

The RP1 bench top rotor stator is one of the most economical and fully featured rotor stator lines on the market. This high shear mixer can handle a wide range of liquid volumes up to 5 gallons. The unique container holder is adjustable to clamp vessels of various diameters firmly in place. The RP1 comes standard with an angle slotted stator but can be quickly and easily replaced with a general purpose stator or an emulser stator for added variability. Adjust the height of the rotor stator with an air or electric lift option, allowing you greater versatility on vessel height. The VFD gives you a greater level of control with a digital RPM readout to ensure proper operating speeds for your process. The RP1 operates at mixing speeds from 0-5000 RPM and accommodates vessels up to 16” in height. If a taller height is needed, consider the RP2 line of post mount rotor stators.

explosion proof high shear disperser

2HP Explosion Proof Lab Bench Disperser for up to 5 Gal Containers

DP1020XDA $5,635

Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. With many explosion proof high speed dispersers, you have to leave the rated area to adjust the speed or you are stuck cranking down on a variable speed pulley while reaching around your vessel. With the DP1 explosion proof line, the dissolver controls are located in an explosion proof box right in front of the operator, with the motor control box located outside...