Quick Ship Products

All quick ship items ship within 48 hours.

    

Free Resources

12" Blade Adapter Shaft

12" Blade Adapter Shaft

BAS037012 $49

Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct's turned and threaded 3/8" threaded shaft adapter allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This 3/8" blade adapter shaft is 12" long with a 1/4" threaded portion and comes with a hex nut and washer for easy installation.

1.5" Lab Hydrofoil w/ 3/8" Bore

1.5" Lab Hydrofoil w/ 3/8" Bore

LIMH15375 $37

These impeller blades feature 316L Stainless Steel. High pumping per horsepower. Low shear.

316SS Shaft, 3/8" Dia, 18" Lg

316SS Shaft, 3/8" Dia, 18" Lg

SHF037018 $34

Precision machined shafting for liquid, shaft based agitators. Machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

4 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 4" Dia, 5/8" Bore

PRPL04062 $83

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 inch propeller with 3/8 inch bore

3 Blade Propeller, LH, Sq, 3" Dia, 3/8" Bore

PRPL03037 $73

The three bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, these three blade propellers will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

4 inch folding impeller with 5/8 inch bore

Folding Impeller, 4in Dia, 5/8in Bore

FLP004062 $86

Mixer Direct’s line of large folding impellers allow you to get the stirring power of a large impeller through a 2” NPT opening, like that in the top of a 55 Gal drum. All stainless construction ensures durability and cleanability of this folding impeller mixer. The blades fold down due to gravity and open up as the mixer is activated.

316SS Shaft, 3/8" Dia, 12" Lg

316SS Shaft, 3/8" Dia, 12" Lg

SHF037012 $24

Precision machined shafting for liquid, shaft based agitators. Machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

1.5" Axial Flow Turbine w/ 3/8" Bore

1.5" Axial Flow Turbine w/ 3/8" Bore

LIMA15375 $48

316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this axial turbine blade impeller allows a mixer to the break up agglomeration and impart solids effectively. The axial turbine blade will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 1.5" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

Ultra Shear Dispersion Blade, 2in Dia, 1/4in CH

Ultra Shear Dispersion Blade, 2in Dia, 1/4in CH

USB020025 $71

Ultra Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. The Ultra Shear 304 stainless steel blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

2" Axial Flow Turbine w/ 3/8" Bore

2" Axial Flow Turbine w/ 3/8" Bore

LIMA20375 $50

316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this axial mixing blade allows a mixer to the break up agglomeration and impart solids effectively. These axial mixing blades will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 2" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

316SS Shaft, 3/8" Dia, 24" Lg

316SS Shaft, 3/8" Dia, 24" Lg

SHF037024 $45

Precision machined shafting for liquid, shaft based agitators. Machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

2.5" Axial Flow Turbine w/ 3/8" Bore

2.5" Axial Flow Turbine w/ 3/8" Bore

LIMA25375 $52

316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this radial flow turbine allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 2.5" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

3" Lab Propeller w/ 3/8" Bore

3" Lab Propeller w/ 3/8" Bore

LIMP30375 $43

316L Stainless Steel Propeller. Low shear, high top to bottom pumping capacity.

6 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 6" Dia, 5/8" Bore

PRPL06062 $104

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3" Radial Flow Lab Impeller w/ 3/8" Bore

3" Radial Flow Lab Impeller w/ 3/8" Bore

LIMR30375 $54

The Radial flow turbine creates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers. Mixer Direct's Lab Radial Flow Impeller features a 3" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

3" Lab Hydrofoil w/ 3/8" Bore

3" Lab Hydrofoil w/ 3/8" Bore

LIMH30375 $43

316L Stainless Steel. High pumping per horsepower. Low shear.

4 inch propeller with 1/2 inch bore

3 Blade Propeller, LH, Sq, 4" Dia, 1/2" Bore

PRPL04050 $83

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s industrial blending blades are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

316SS Shaft, 3/8" Dia, 15" Lg

316SS Shaft, 3/8" Dia, 15" Lg

SHF037015 $28

Precision machined shafting for liquid, shaft based agitators. Machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

2" Lab Hydrofoil w/ 3/8" Bore

2" Lab Hydrofoil w/ 3/8" Bore

LIMH20375 $39

These impeller stirrer blades are made with 316L Stainless Steel. High pumping per horsepower. Low shear.

3.5" Axial Flow Turbine w/ 3/8" Bore

3.5" Axial Flow Turbine w/ 3/8" Bore

LIMA35375 $60

316 stainless steel turbine. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 3.5" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

15" Blade Adapter Shaft

15" Blade Adapter Shaft

BAS037015 $59

Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct’s turned and threaded 3/8” shaft allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This 3/8" blade adapter shaft is 15" long with a 1/4" threaded portion and comes with a hex nut and washer for easy installation.

1.5" Radial Flow Lab Impeller w/ 3/8" Bore

1.5" Radial Flow Lab Impeller w/ 3/8" Bore

LIMR15375 $48

The Radial flow turbine creates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow of this stainless-steel radial blade impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.Mixer Direct's Lab Radial Flow Turbine features a 1.5" blade, a 3/8" bore, and a hub with set screw attachment for easy blade installment.

2" Lab Hydrofoil w/ 5/16" Bore

2" Lab Hydrofoil w/ 5/16" Bore

LIMH20313 $39

316L Stainless Steel. High pumping per horsepower. Low shear stainless-steel rotor.

6 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 6" Dia, 3/4" Bore

PRPL06075 $104

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

6 inch propeller with 1/2 bore

3 Blade Propeller, LH, Sq, 6" Dia, 1/2" Bore

PRPL06050 $104

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

5 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 5" Dia, 5/8" Bore

PRPL05062 $94

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 inch propeller with half inch bore

3 Blade Propeller, LH, Sq, 3" Dia, 1/2" Bore

PRPL03050 $73

The 3-bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s 3-inch propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, this 3-inch propeller will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

316SS Shaft, 5/8" Dia, 48" Lg

316SS Shaft, 5/8" Dia, 48" Lg

SHF062048 $130

Precision machined shafting for liquid, shaft based agitators. This stainless-steel mixer shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

3 inch high flow dispersion blade with 3/8 inch bore

High Flow Dispersion Blade, 3in Dia, 3/8in CH

HFD030037 $94

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Most Dispersion blades have issues realted to sufficient fluid motion to get a batch to complete uniformity. Mixer Direct addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher visocosity applications. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

8 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 8" Dia, 5/8" Bore

PRPL08062 $168

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

4 inch propeller with 3/4 bore

3 Blade Propeller, LH, Sq, 4" Dia, 3/4" Bore

PRPL04075 $83

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

5 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 5" Dia, 1" Bore

PRPL05100 $104

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

5 inch dispersion blade with 5/8 inch bore

Dispersion Blade, 5in Dia, 5/8in CH

DBL050062 $84

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

5 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 5" Dia, 3/4" Bore

PRPL05075 $94

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3.5 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 3.5" Dia, 5/8" Bore

PRPL035062 $79

The 3-bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, these axial turbine blades will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction. Contact us to learn more about our axial turbines.

4 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 4" Dia, 1" Bore

PRPL04100 $94

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 3" Dia, 3/4" Bore

PRPL03075 $73

The 3-bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s mixer propeller blades are solid 316L for maximum corrosion resistance in most environments. Being left handed, these mixer propeller blades will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

12 inch hydrofoil impeller with 1 inch bore

High Efficiency Impeller, 12in Dia, 1in Bore

HEI012100 $366

The 3 bladed 316SS high efficiency impellers offer the greatest pumping per horsepower in the Mixer Direct impeller line. They are used in a variety of applications from general blending to storage tanks. A low cost alternative to propellers in the larger sizes they are popular on the flange mount, plate mount and top entry lines.

5 inch propeller with 1/2 inch bore

3 Blade Propeller, LH, Sq, 5" Dia, 1/2" Bore

PRPL05050 $94

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

8 inch propeller with 1/2 inch bore

3 Blade Propeller, LH, Sq, 8" Dia, 1/2" Bore

PRPL08050 $168

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

7 inch propeller with 1/2 inch bore

3 Blade Propeller, LH, Sq, 7" Dia, 1/2" Bore

PRPL07050 $127

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

6 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 6" Dia, 1" Bore

PRPL06100 $114

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

4.5 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 4.5" Dia, 5/8" Bore

PRPL045062 $92

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

10 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 10" Dia, 3/4" Bore

PRPL10075 $253

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

7 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 7" Dia, 1" Bore

PRPL07100 $139

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

10 inch propeller with 1/2 inch bore

3 Blade Propeller, LH, Sq, 10" Dia, 1/2" Bore

PRPL10050 $253

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

4.5 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 4.5" Dia, 1" Bore

PRPL045100 $97

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3.5 inch propeller with half inch bore

3 Blade Propeller, LH, Sq, 3.5" Dia, 1/2" Bore

PRPL035050 $79

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s turbine type propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.