Ethanol & Bio-Diesel

When it comes to your mixer and tank needs for ethanol and biodiesel production, we have a number of different options for your industry. From mixers to processing systems, and ethanol tanks and plastic biodiesel tanks, allow us to help create a solution that will aid your process. Our team of engineers are ready to work with you to help customize a full biodiesel production equipment system complete with automation to help you simplify your industrial process. Contact us to ask about our plastic biodiesel tanks and other biodiesel production equipment.

Ethanol & Bio-Diesel Products

| View all
5 Gal Pail Ring Mount Mixer 3/4 HP AIR

5 Gal Pail Ring Mount Mixer 3/4 HP AIR

RGM075AIR $789

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire mixer can move to fit to a center or side opening in the lid. The air motor is equipped with a muffler and needle control valve.

5 Gal Pail Ring Mount Mixer 1.5 HP AIR

5 Gal Pail Ring Mount Mixer 1.5 HP AIR

RGM150AIR $889

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire mixer can move to fit to a center or side opening in the lid. The air motor is equipped with a muffler and needle control valve.

1/2 HP Air Stirrer w/ Coupler

1/2 HP Air Stirrer w/ Coupler

ASH050DCO $619

This Air Stirrer powerhead is ready to attach to your stand and get to work. With a 10" X 5/8" stainless rod ground and polished to mate flawlessly with the SCP062062, this motor assembly will fit most lab or small batch operations. The air agitator's coupling will accept a 3/8" shaft. The air agitator's motor is equipped with a muffler and needle control valve.

5 Gal Pail Ring Mount Mixer 1/2 HP Variable Speed

5 Gal Pail Ring Mount Mixer 1/2 HP Variable Speed

RGM050VMR $1,585

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire 5-gallon bucket stirrer can move to fit to a center or side opening in the lid. VFD can read out frequency and is control with a membrane touch pad.

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

1HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1010VDA $2,997

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One-step dispersion blade change-out on the DP1 laboratory mixer agitator lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. These laboratory mixer agitators are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please...

electric high shear disperser

2HP Electric Lab Bench Disperser for up to 5 Gal Containers

DP1020VDA $3,368

New DP1 // Newly released from Mixer Direct, the DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. The high shear dissolver can handle a wide range of volumes from 200 mL up to 5 Gals. The unique container holder adjusts so as to clamp the vessels in place firmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. Dissolver mixer models are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for electric dissolver are in the front of the unit, with an RPM readout to ensure you are getting the same dispersion results every time. All of the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height. If greater height is needed please see the DP2 line of...

115 Volt All Purpose Stirrer Lab Package Caframo

115 Volt All Purpose Stirrer Lab Package

LABDC3030 $2,499

MixerDirect’s high torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the line is the high performance Brushless Direct Current (BDC) motor. A unique two speed transmission gives the laboratory paddle mixer incredible amounts of power. MixerDirect stirrers are quiet, dependable, maintenance free and ideal for continuous use. Included in each purchase: Overhead stirrer motor, chuck, chuck key, support rod, external power supply, grounded power cord, manual in four languages (English, French, Spanish and German), three year warranty, stand, clamp, and 2" propeller. Our lab package contains everything needed to test mixing in a laboratory or small batch setting. Our laboratory impellers are designed to scale to full size blades simplifying the transfer from testing to full scale production. Mixer Direct offers a large range of impeller types and sizes to fulfill every mixing need.

3/4 HP Air Stirrer w/ Chuck

3/4 HP Air Stirrer w/ Chuck

ASH075DCK $815

This Air Stirrer powerhead is ready to attach to your stand and get to work. With a 10" X 5/8" stainless rod ground and polished to mate flawlessly with the SCP062062, this motor assembly will fit most lab or small batch operations. Chuck will accept up to a 3/8" shaft. Air motor is equipped with a muffler and needle control valve.