316SS Shaft, 1/2" Dia, 36" Lg

316SS Shaft, 1/2" Dia, 36" Lg

SHF050036 $84

Precision machined shafting for liquid, shaft based agitators. This steel mixer rod is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

Ultra Shear Dispersion Blade, 1.6in Dia, 3/8in CH

Ultra Shear Dispersion Blade, 1.6in Dia, 3/8in CH

USB016037 $69

Ultra-Shear Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to flow over the teeth breaking the agglomerations into increasing smaller particles. The high-speed dispersion blade includes extra surface area at the blade tip to facilitate even higher levels of shear in the product. This leads to even faster throughput! Typically used in paints and inks, these high-speed dispersion blades are now being used in a variety of industries for increased efficiency.

5 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 5" Dia, 1" Bore

PRPL05100 $104

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

4 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 4" Dia, 1" Bore

PRPL04100 $94

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

4 inch propeller with 3/4 bore

3 Blade Propeller, LH, Sq, 4" Dia, 3/4" Bore

PRPL04075 $83

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

air direct drive heavy duty clamp mount

1.5 HP Air Direct Drive Heavy Duty Clamp Mount

HDC150ADD-24 $2,143

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer includes a lower support bearing taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axes of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixers with multiple impeller types, stand mounting options, and varied shaft lengths. Air motor driven mixers include a precision needle valve to control the speed.

316SS Shaft, 5/8" Dia, 24" Lg

316SS Shaft, 5/8" Dia, 24" Lg

SHF062024 $75

Precision machined shafting for liquid, shaft based agitators. This stainless-steel rod is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

Stirrer Stand, 48” Height, Heavy Duty

Stirrer Stand, 48” Height, Heavy Duty

SSD48SPSD $293

Heavy duty stand that can support the larger motors necessary for heavy viscosity lab applications. The 5/8" stainless ground and polished vertical rod allows accessories to move smoothly along the length of this heavy-duty mixer stand.

5" Anchor Paddle w/ 36" Shaft

5" Anchor Paddle w/ 36" Shaft

LIMC05375 $219

Mixer Direct's Lab Anchor is designed for use in a laboratory setting. The 316SS paddle type agitator comes complete with 5" Impeller welded to a 36" x 3/8" Shaft and provides high shear. The paddle type agitator is perfect for low speed and high viscosity mixing and creates tangential flow within a container.

12 inch folding impeller with 3/4 inch bore

Folding Impeller, 12in Dia, 3/4in Bore

FLP012075 $302

Mixer Direct’s line of large folding impellers allow you to get the stirring power of a large impeller through a 6” NPT opening, like that of a IBC tote. All stainless construction ensures durability and cleanability. The blades fold down due to gravity and open up as the mixer is activated.

5/16" dia 316SS shaft, 16" Lg

5/16" dia 316SS shaft, 16" Lg

SHF031018 $33

Precision machined shafting for liquid, shaft based agitators. This precision ground steel rod is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

1.5 HP Air Direct Drive Tote Bracket Mount

1.5 HP Air Direct Drive Tote Bracket Mount

TBM150ADD $2,134

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

7 inch propeller with 1/2 inch bore

3 Blade Propeller, LH, Sq, 7" Dia, 1/2" Bore

PRPL07050 $127

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

316SS Shaft, 5/8" Dia, 32" Lg

316SS Shaft, 5/8" Dia, 32" Lg

SHF062032 $100

Precision machined shafting for liquid, shaft based agitators. This polished mixer shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

10 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 10" Dia, 5/8" Bore

PRPL10062 $253

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

4 inch folding impeller with 3/4 inch bore

Folding Impeller, 4in Dia, 3/4in Bore

FLP004075 $86

Mixer Direct’s line of large folding, pitched paddle impellers allows you to get the stirring power of a large impeller through a 2” NPT opening, like that in the top of a 55 Gal drum. All stainless construction ensures durability and cleanability with these pitched paddle impellers. The blades fold down due to gravity and open up as the mixer is activated.

5 inch propeller with 1/2 inch bore

3 Blade Propeller, LH, Sq, 5" Dia, 1/2" Bore

PRPL05050 $94

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3.5 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 3.5" Dia, 5/8" Bore

PRPL035062 $79

The 3-bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, these axial turbine blades will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction. Contact us to learn more about our axial turbines.

5 inch dispersion blade with 5/8 inch bore

Dispersion Blade, 5in Dia, 5/8in CH

DBL050062 $84

Dispersion Blades rotate at high RPMs to facilitate the quick impartation of solids at a fine grind. The liquid contacts the blade and moves outward to to flow over the teeth breaking the agglomerations into increasing smaller particles. Typically used in paints and inks, they are now being used in a variety of industries for increased efficiency.

5 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 5" Dia, 3/4" Bore

PRPL05075 $94

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

1/2 HP Electric Direct Drive Bung Mount

1/2 HP Electric Direct Drive Bung Mount

BUG050EDD-28 $1,092

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bug openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each drum hole mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.

Electric Direct Drive Heavy Duty Clamp Mount

1/2 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC050EDD-32 $1,735

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each heavy-duty propeller mixer includes a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

3 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 3" Dia, 3/4" Bore

PRPL03075 $73

The 3-bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s mixer propeller blades are solid 316L for maximum corrosion resistance in most environments. Being left handed, these mixer propeller blades will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

BUG150ADD-S-28 $1,591

This air agitator mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The direct drive mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

316SS Shaft, 1/4" Dia, 12" Lg

316SS Shaft, 1/4" Dia, 12" Lg

SHF025012 $19

Precision machined shafting for liquid, shaft based agitators. This replacement mixer shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 5/16" Dia, 9" Lg

316SS Shaft, 5/16" Dia, 9" Lg

SHF031009 $21

Precision machined shafting for liquid, shaft based agitators. This metal shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1/4" Dia, 15" Lg

316SS Shaft, 1/4" Dia, 15" Lg

SHF025015 $22

Precision machined shafting for liquid, shaft based agitators. This ground steel rod is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 3/4" Dia, 36" Lg

316SS Shaft, 3/4" Dia, 36" Lg

SHF075036 $137

Precision machined shafting for liquid, shaft based agitators. This precision ground rod is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1/4" Dia, 9" Lg

316SS Shaft, 1/4" Dia, 9" Lg

SHF025009 $17

Precision machined shafting for liquid, shaft based agitators. This custom made steel shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

8 inch propeller with 1/2 inch bore

3 Blade Propeller, LH, Sq, 8" Dia, 1/2" Bore

PRPL08050 $168

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

1.5 HP Air Direct Drive Economy Clamp Mount

1.5 HP Air Direct Drive Economy Clamp Mount

ECM150ADD-24 $1,203

These clamp mount mixers are short on price and long on function. Ideal for use in small batches and where some shear action is required. Adjustable positioning, light weight and easy removability makes the clamp mount a popular choice for applications that need a high level of versatility. All of the materials contacting the fluid are constructed of 316 grade stainless steel, ensuring a high level of resistance to chemical attack. A square pitched left hand propeller is included with the mixer, providing a significant amount of flow per horsepower.

316SS Shaft, 5/16" Dia, 24" Lg

316SS Shaft, 5/16" Dia, 24" Lg

SHF031024 $43

Precision machined shafting for liquid, shaft based agitators. This precision ground steel shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 3/4" Dia, 42" Lg

316SS Shaft, 3/4" Dia, 42" Lg

SHF075042 $159

Precision machined shafting for liquid, shaft based agitators. This turned and ground polished shafting is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1/2" Dia, 30" Lg

316SS Shaft, 1/2" Dia, 30" Lg

SHF050030 $72

Precision machined shafting for liquid, shaft based agitators. This precision ground steel bar is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1/2" Dia, 24" Lg

316SS Shaft, 1/2" Dia, 24" Lg

SHF050024 $60

Precision machined shafting for liquid, shaft based agitators. This precision ground shafting is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

316SS Shaft, 1/2" Dia, 18" Lg

316SS Shaft, 1/2" Dia, 18" Lg

SHF050018 $47

Precision machined shafting for liquid, shaft based agitators. This ground and polished shafting is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

10 inch propeller with 3/4 inch bore

3 Blade Propeller, LH, Sq, 10" Dia, 3/4" Bore

PRPL10075 $253

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

7 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 7" Dia, 1" Bore

PRPL07100 $139

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

4.5 inch propeller with 5/8 inch bore

3 Blade Propeller, LH, Sq, 4.5" Dia, 5/8" Bore

PRPL045062 $92

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

1.0 HP IBC Totes Electric Bracket Mount

1.0 HP IBC Totes Electric Bracket Mount

TBM100EDD $2,080

Designed to mix IBC Totes ,the bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1/3 HP Electric Direct Drive Heavy Duty Clamp Mount

1/3 HP Electric Direct Drive Heavy Duty Clamp Mount

HDC033EDD-32 $1,263

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths.

6 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 6" Dia, 1" Bore

PRPL06100 $114

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

1.5 HP Air Gear Drive Heavy Duty Clamp Mount

1.5 HP Air Gear Drive Heavy Duty Clamp Mount

HDC150AGD-24 $2,678

Download The Heavy Duty Clamp Mount Air Gear Drive Tech Sheet The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability. Each mixer include a lower support bear taking the radial shaft load off of the motor/gearbox extending their longevity. Outstanding adjustability allows shaft positioning on two axis of rotation. Each mixer comes standard with an oversized 316SS shaft and 316SS set screw attached propellers. Many options are available on these mixer with multiple impeller types, stand mounting options, and varied shaft lengths. Air motor driven mixers include a precision needle valve to control the speed.

316SS Shaft, 1" Dia, 72" Lg

316SS Shaft, 1" Dia, 72" Lg

SHF100072 $539

Precision machined shafting for liquid, shaft based agitators. This precision ground stainless rod is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

Propeller, LH, SP, 5in Dia, 5/8in Bore

Propeller, LH, SP, 5in Dia, 5/8in Bore

PRPS05062 $103

The 3 bladed stainless steep pitch impeller allows for additional flow out of the the same diameter propeller as compare to the Square pitch line. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise.

10 inch propeller with 1 inch bore

3 Blade Propeller, LH, Sq, 10" Dia, 1" Bore

PRPL10100 $253

The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

1.5 HP Air Direct Drive Bung Mount

1.5 HP Air Direct Drive Bung Mount

BUG150ADD-28 $1,391

This air powered drum mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each air powered drum mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

316SS Shaft, 5/8" Dia, 21" Lg

316SS Shaft, 5/8" Dia, 21" Lg

SHF062021 $66

Precision machined shafting for liquid, shaft based agitators. This precision made steel shaft is machine ground and polished to -.001/.003 for Mixer Direct impellers, couplers, and bearings. Material is low carbon 316 for weld on impellers and high corrosion resistance.

Quick Ship Mixer Products & Accessories

All quick ship items ship within 48 hours.