Industrial Mixers & Mixer Parts

Free Resources

Download Catalog
5 Gal Pail Ring Mount Mixer 1.5 HP AIR

5 Gal Pail Ring Mount Mixer 1.5 HP AIR

RGM150AIR $889

Deigned to sit comfortably on top of a five gal pail, the Ring Mount mixer functions in both an open pail and closed pail. The impellers fold to fit through the bung opening and open up when the mixer is activated. The entire mixer can move to fit to a center or side opening in the lid. The air motor is equipped with a muffler and needle control valve.

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

1.5 HP Air Direct Drive Sealed Bung Mount Mixer

BUG150ADD-S-28 $1,591

This air agitator mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The direct drive mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Air Direct Drive Bung Mount

1.5 HP Air Direct Drive Bung Mount

BUG150ADD-28 $1,391

This air powered drum mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each air powered drum mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

1.5 HP Electric Gear Drive Tote Bracket Mount

1.5 HP Electric Gear Drive Tote Bracket Mount

TBM150EGD $3,288

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

4 HP Air Gear Drive Lightweight Tote Bracket

4 HP Air Gear Drive Lightweight Tote Bracket

TBE400AGD $2,982

Download the economy tote bracket air gear drive mixer tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1.5 HP Electric Gear Drive Lightweight Tote Bracket

1.5 HP Electric Gear Drive Lightweight Tote Bracket

TBE150EGD $2,626

Download the economy tote bracket electric gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1.5 HP Air Gear Heavy-Duty Tote Bracket Mount

1.5 HP Air Gear Heavy-Duty Tote Bracket Mount

TBM150AGD $3,254

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1/2 HP Electric Gear Drive Lightweight Tote Bracket

1/2 HP Electric Gear Drive Lightweight Tote Bracket

TBE050EGD $2,315

Download the economy tote bracket electric gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

3/4 HP Electric Gear Drive Lightweight Tote Bracket

3/4 HP Electric Gear Drive Lightweight Tote Bracket

TBE075EGD $2,391

Download the economy tote bracket electric gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

4 HP Air Gear Drive Tote Bracket Mount

4 HP Air Gear Drive Tote Bracket Mount

TBM400AGD $3,738

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1/2 HP Electric Gear Drive Tote Bracket Mount

1/2 HP Electric Gear Drive Tote Bracket Mount

TBM050EGD $2,902

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this IBC tote mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

Raiden Standard 2 HP Plate Mount Top Entry Mixer

Raiden Standard 2 HP Plate Mount Top Entry Mixer

RDNSTD020P-80 $3,394

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard steel mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden mixer.  

1/2 HP Variable Speed Electric Direct DriveTri-Clamp Mount Mixer

1/2 HP Variable Speed Electric Direct DriveTri-Clamp Mount Mixer

TCM050VDD-24 $2,609

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment.. This mixer is equipped with a NEMA 4X washdown Variable speed controller. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

3/4 HP Explosion Proof Gear Drive Tote Bracket Mount

3/4 HP Explosion Proof Gear Drive Tote Bracket Mount

TBM075XGD $3,495

Designed to mix IBC Totes, these heavy duty IBC tote mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this explosion proof mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

3/4 HP Explosion Proof Gear Drive Lightweight Tote Bracket

3/4 HP Explosion Proof Gear Drive Lightweight Tote Bracket

TBE075XGD $2,787

Download the economy tote bracket explosion proof gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

3/4 HP Air Gear Drive Lightweight Tote Bracket

3/4 HP Air Gear Drive Lightweight Tote Bracket

TBE075AGD $2,338

Download the economy tote bracket air gear drive mixer tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization options for this IBC blender include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler.

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

1.5 HP Variable Speed Gear Drive Tote Bracket Mount

TBM150VGD $4,588

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

1.5HP Explosion Proof Gear Drive Tote Bracket Mount

TBM150XGD $3,777

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Explosion Proof mixers are designed for hazardous environments.

3/4 HP Electric Gear Drive Tote Bracket Mount

3/4 HP Electric Gear Drive Tote Bracket Mount

TBM075EGD $2,969

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers.

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

1 HP Explosion Proof Direct Drive Sealed Bung Mount Mixer

BUG100XDD-S-28 $2,002

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The industrial sealed bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Air Gear Drive Lightweight Tote Bracket

1.5 HP Air Gear Drive Lightweight Tote Bracket

TBE150AGD $2,595

Download the economy tote bracket air gear drive mixer tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1 HP Variable Speed Direct Drive Drum Clamp Mount

1 HP Variable Speed Direct Drive Drum Clamp Mount

DCM100VDD $2,105

Download The Drum Clamp Mount Variable Direct Drive. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

Raiden Standard 5 HP Flange Mount Top Entry Mixer

Raiden Standard 5 HP Flange Mount Top Entry Mixer

RDNSTD050F-90 $4,962

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard flange mount mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden mixer.  

Raiden Standard 2 HP Flange Mount Top Entry Mixer

Raiden Standard 2 HP Flange Mount Top Entry Mixer

RDNSTD020F-80 $3,675

The standard line of Raiden mixers establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

1/2 HP Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1/2 HP Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM050EGD-S $6,524

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1/2 HP Variable Speed Electric Direct Drive White Washdown Tri-Clamp Mount Mixer

1/2 HP Variable Speed Electric Direct Drive White Washdown Tri-Clamp Mount Mixer

TCM050VDD-W $3,004

The Mixer Direct sanitary tri-clamp mixer line is built for sanitary applications requiring a wash down design. This line is constructed for food, various beverage and pharmaceutical applications, or any application requiring a high degree of cleanability. The sanitary tri-clamp ensures suitability for sanitary requirements that would necessitate a full wash down of the equipment. This white wash down construct protects against most types of chemical, moisture, or humidity related corrosion, and other washdown processes taking place in the vicinity where overspray might occur.

1 HP Explosion Proof Direct Drive Bung Mount

1 HP Explosion Proof Direct Drive Bung Mount

BUG100XDD-28 $1,803

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The explosion proof bung mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each direct electric barrel mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

3/4 HP Air Gear Drive Tote Bracket Mount

3/4 HP Air Gear Drive Tote Bracket Mount

TBM075AGD $3,029

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. Air motor includes a needle control valve and a muffler

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

1 HP Variable Speed Direct Drive Sealed Bung Mount Mixer

BUG100VDD-S-28 $2,154

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1.5 HP Variable Speed Gear Drive Lightweight Tote Bracket

1.5 HP Variable Speed Gear Drive Lightweight Tote Bracket

TBE150VGD $4,128

Download the economy tote bracket variable gear drive tech sheet Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. Features a lightweight aluminum frame which provides the strength to support the mixer and ability to easily change applications. The bracket can fit a range of 40-42" so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1 HP Electric Direct Drive Clamp Mount

1 HP Electric Direct Drive Clamp Mount

DCM100EDD $1,400

Download The Electric Direct Drive Tech Sheet This bung inserted mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1.5 HP Air Direct Drive Drum Clamp Mount

1.5 HP Air Direct Drive Drum Clamp Mount

DCM150ADD $1,733

This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (2) 4" 304SS set screw attached impellers. Our air motor provides an economical variable speed option and can be used in hazardous environments. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

Raiden Standard 1.5 HP Flange Mount Top Entry Mixer

Raiden Standard 1.5 HP Flange Mount Top Entry Mixer

RDNSTD015F-80 $3,666

The Raiden Standard flange mount mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden mixer.  

Raiden Standard 3 HP Plate Mount Top Entry Mixer

Raiden Standard 3 HP Plate Mount Top Entry Mixer

RDNSTD030P-90 $4,097

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

Raiden Standard 1 HP Plate Mount Top Entry Mixer

Raiden Standard 1 HP Plate Mount Top Entry Mixer

RDNSTD010P-80 $3,222

The Raiden Standard mixer line establishes a new price point and speed-of-delivery for a quality top entry mixer. The MXD Process™ team has optimized the Raiden Standard line to be in stock with 48-hour shipping times at a high value price. The Raiden Standard mixer is equipped with a Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. They are dual rated and badged for 230/460V 3 Phase 60Hz or 200/400V 3 Phase 50Hz operation. Perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Standard mixer.  

7.5 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

7.5 HP Explosion Proof Raiden Plus Top Entry Flange Mount Mixer

RDNPLUS075FX-90 $12,615

The Raiden Plus mixer line delivers a new quality in top entry mixers for large tank mixing applications.  The 7.5 HP Raiden Plus Flange Mount Mixer is equipped with an XP Totally Enclosed Fan Cooled (TEFC) electric motor. The motors are suitable for inside or outside applications carrying an IP55 enclosure rating that protects against water spray and dust ingress. This 7.5 HP mixer is perfect for USA or international applications. These motors are also inverter rated and can be safely wired into a variable speed control system. Let us know if you would like to add a Speed Controller to your Raiden Plus mixer. Suggested tank volume for this mixer 5,000 to 10,000 gallons.  

350 Gal SS Tote & Mixer System (2500cps)

350 Gal SS Tote & Mixer System (2500cps)

SYS4TST00350-2500 $5,056

Unlike any other tote and mixing system in the industry, our custom tote is designed to facilitate your mixing process. With the offset manway, you have optimal access to your process fluids and allow for excellent placement of your mixing system. By combining craftsmanship with standardized specifications, we are able to offer this one-of-a-kind system with fast lead times to get your operation started.

1 HP Variable Speed Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1 HP Variable Speed Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM100VGD-S $7,694

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel hydrofoil impellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids.This mixer is equipped with a NEMA 4X washdown Variable speed controller allowing precise RPM control. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1/2 HP Variable Speed Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1/2 HP Variable Speed Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM050VGD-S $7,298

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. This mixer is equipped with a NEMA 4X washdown Variable speed controller allowing precise RPM control. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1/2 HP Variable Speed Electric Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1/2 HP Variable Speed Electric Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM050VDD-S $4,427

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. This mixer is equipped with a NEMA 4X washdown Variable speed controller. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1.5 HP Air Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1.5 HP Air Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM150AGD-S $8,141

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. The 5:1 turndown ratio give you the torque you need to mix more viscous liquids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

pharma tri clamp mixer

1.5 HP Electric Gear Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM150EGD-S $6,328

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1.5 HP Air Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1.5 HP Air Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM150ADD-S $5,143

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1 HP Electric Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1 HP Electric Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM100EDD-S $3,821

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1/2 HP Electric Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

1/2 HP Electric Direct Drive Sanitary Stainless Steel Tri-Clamp Mount Mixer

TCM050EDD-S $3,522

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. These stainless steel washdown industrial mixers were constructed to be used in the most sterile environments. Engineered with easily cleanable surfaces, outstanding durability, and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment rated for sterile applications. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

3/4 HP Variable Speed Gear Drive Tote Bracket Mount

3/4 HP Variable Speed Gear Drive Tote Bracket Mount

TBM075VGD $4,062

Designed to mix IBC Totes, these heavy duty mixers have a 7.5:1 worm gear reduction to provide the torque needed to drive two stainless folding impellers. These impeller will collapse to allow entry into the 6” NPT opening in the center of the IBC tote. The bracket can fit a range of 36-48” inch so almost any size tote can be accommodated. However, this mixer is not just for totes, but any tank where mounting on top with a bracket would be appropriate. Customization option include longer shafts, gear ratios, and varied impellers. VFD units feature frequency display and membrane control pad.

1 HP Variable Speed Electric Gear Drive Tri-Clamp Mount Mixer

1 HP Variable Speed Electric Gear Drive Tri-Clamp Mount Mixer

TCM100VGD-24 $4,198

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. This mixer is equipped with a NEMA 4X washdown Variable speed controller allowing precise RPM control. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!

1/2 HP Variable Speed Electric Gear Drive Tri-Clamp Mount Mixer

1/2 HP Variable Speed Electric Gear Drive Tri-Clamp Mount Mixer

TCM050VGD-24 $3,744

Designed to attach to a 3" Tri-Clamp mount fittings, Mixer Direct's Tri-Clamp Mount Mixers offer extreme durability and versatility. Engineered with outstanding durability and lightweight portability these agitators come equipped with stainless steel propellers. A high performance seal ensures a sealed environment. A 5:1 turndown ratio provides the torque necessary to mix more viscous fluids. This mixer is equipped with a NEMA 4X washdown Variable speed controller allowing precise RPM control. Mixer Direct offers many customization options including longer shafts, varying gear ratios, and many impeller types. We can customize the Tri-Clamp Mount Mixer to fit any application just call one of our sales engineers or fill out a contact form!