
3" Axial Flow Turbine Impeller with 3/8" Bore
316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this impeller type agitator allows a mixer to the break up agglomeration and impart solids effectively. These impeller type agitators will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 3" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

3" Lab Propeller w/ 3/8" Bore
316L Stainless Steel Propeller. Low shear, high top to bottom pumping capacity.

3" Radial Flow Lab Impeller w/ 3/8" Bore
The Radial flow turbine creates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers. Mixer Direct's Lab Radial Flow Impeller features a 3" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

3" Lab Hydrofoil w/ 3/8" Bore
316L Stainless Steel. High pumping per horsepower. Low shear.

3" Lab Hydrofoil w/ 5/16" Bore
316L stainless steel mixing hydrofoil. High pumping per horsepower. Low shear.

3" Lab Propeller w/ 5/16" Bore
316L Stainless Steel. This lab agitator blade has a low shear, high top to bottom pumping capacity.

3" Folding Lab Impeller with 5/16" x 16" Shaft
Designed to fit into beakers and flasks with narrow necks, Mixer Direct's Folding Lab Impeller is the perfect impeller for your laboratory. In the folded position these impellers have a diameter of less than 5/8" allowing them to fit inside your 24/40 joints. When rotated centrifugal force raises the impellers which open with an outside diameter of 3" and create radial flow. Made from corrosion resistant 316SS these impellers give you the mixing you require in those narrow necked laboratory vessels.