Drum Mixers

In order to minimize transfer waste and save capital investment, many manufacturers choose to do their mixing right in the drum where they receive their product. In order to do that appropriately Mixer Direct has developed a line of drum agitators that attach in a variety of ways to the 55-gallon drum. Some of our 55-gallon drum agitators clamp on to the side or a stand placed next to the drum. Others prefer to replace the lid on an open top drum with a Drum Lid Mount drum mixer. For closed drums, the bung mount mixer has folding impellers that open up when the motor is activated.

Contact Us

Free Resources

Download Catalog

Horsepower

Speed Controller

Motor Type

Enclosure Type

Phase

4 HP Air Gear Drive Drum Clamp Mount

4 HP Air Gear Drive Drum Clamp Mount

DCM400AGD $1,630

Download The Drum Clamp Mount Air Gear Drive Tech Sheet This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. Each barrel stirrer device comes standard with a 5/8” diameter 316SS shaft and (4) 4" 304SS set screw attached impellers. The electric gear drive has a 5:1 helical gear reduction which provides additional torque to your mixer. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Explosion Proof Gear Drive Sealed Bung Mount

1 HP Explosion Proof Gear Drive Sealed Bung Mount

BUG100XGD-S $2,274

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. This overhead bung mixer is rated for use in explosion proof environments. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

4 HP Air Gear Drive Sealed Bung Mount Mixer

4 HP Air Gear Drive Sealed Bung Mount Mixer

BUG400AGD-S $2,598

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The air powered gear driven mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each barrel agitator mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

4 HP Air Gear Drive Bung Mount

4 HP Air Gear Drive Bung Mount

BUG400AGD $2,498

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The air gear driven mixer will work both inside and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each folding impeller bung mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The needle valve controller will give you precise speed control on the no-lube air motor.

1 HP Variable Speed Gear Drive Sealed Bung Mount Mixer

1 HP Variable Speed Gear Drive Sealed Bung Mount Mixer

BUG100VGD-S $2,925

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Variable Speed Gear Drive Drum Clamp Mount

1 HP Variable Speed Gear Drive Drum Clamp Mount

DCM100VGD $2,900

Download The Drum Clamp Mount Variable Gear Drive Tech Sheet This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and (4) 4" 304SS set screw attached impellers. The mixer's 5:1 helical gear reduction provides the torque to mix medium viscosities. The VFD controller will read out motor Hz and give you membrane touch speed control. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Variable Speed Gear Drive Bung Mount

1 HP Variable Speed Gear Drive Bung Mount

BUG100VGD $2,825

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. The VFD controller will read out motor Hz and give you membrane touch speed control.

1 HP Explosion Proof Gear Drive Clamp Mount

1 HP Explosion Proof Gear Drive Clamp Mount

DCM100XGD $2,110

Download The Drum Clamp Mount Explosion Proof Gear Drive Tech Sheet This mixer allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. The explosion proof motor is rated Division I, Class I, Group D and can be used in locations with contain flammable gas or vapor. The 5:1 helical gear reduction provides the torque needed for vigorous mixing. This mixer comes standard with a 5/8” diameter 316SS shaft and (4) 4" 304SS set screw attached impeller. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Explosion Proof Gear Drive Bung Mount

1 HP Explosion Proof Gear Drive Bung Mount

BUG100XGD $2,174

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Rated for use in explosion proof environments.

1 HP Electric Gear Drive Sealed Bung Mount Mixer

1 HP Electric Gear Drive Sealed Bung Mount Mixer

BUG100EGD-S $1,971

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each mixer comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers. Featuring a double sealed bearing and shaft seal this bung mount mixer is perfect for mixing applications that required a closed system.

1 HP Electric Gear Drive Drum Clamp Mount

1 HP Electric Gear Drive Drum Clamp Mount

DCM100EGD $1,625

Download The Drum Clamp Mount Electric Gear Drive Tech Sheet This 55-gallon drum mixing machine allows you to mount it directly to the side of a 55 gallon drum or any similar vessel. The folding props enter through the 2” bunghole and automatically open with centripetal force and provide mixing for low to medium viscosities. With heat treated aluminum housing you get both outstanding durability and lightweight portability. This mixer comes standard with a 5/8” diameter 316SS shaft and (4) 4" 304SS set screw attached impeller.The electric gear drive has a 5:1 helical gear reduction which provides additional torque. Mixer Direct customization options include longer shafts, multiple gear ratios, and varied impellers to encompass any mixing need.

1 HP Electric Gear Drive Bung Mount

1 HP Electric Gear Drive Bung Mount

BUG100EGD $1,871

This mixer allows you to mount it directly to the 2” NPT bung on a 55 gal drum lid or on any vessel. The folding props will slip through the bung opening and automatically open with centripetal force. The mixer will work both in side and center placed bung openings. With a heat treated aluminum housing you get both outstanding durability and lightweight portability. Each bung mixing machine for industrial use comes standard with a 5/8” diameter 316SS shaft and 304SS set screw attached impellers.