
1" Bore Bolt-on Hub
Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1" bore and a 2.5" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1" Bore Weld-on Hub
Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1" and an OD of 2.5".

1.25" Bore Bolt-on Hub
Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1.25" bore and a 3" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1.25" Bore Weld-on Hub
Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1.25" and an OD of 3".

1.5" Axial Flow Turbine w/ 3/8" Bore
316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this axial turbine blade impeller allows a mixer to the break up agglomeration and impart solids effectively. The axial turbine blade will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 1.5" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

1.5" Bore Bolt-on Hub
Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1.5" bore and a 3" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1.5" Bore Weld-on Hub
Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1.5" and an OD of 3".

1.5" Lab Hydrofoil w/ 3/8" Bore
These hydrofoil impeller blades feature 316L Stainless Steel. High pumping per horsepower. Low shear.

1.5" Lab Hydrofoil w/ 5/16" Bore
This impeller for sale is made with 316L Stainless Steel. High pumping per horsepower. Low shear.

1.5" Lab Propeller w/ 5/16" Bore
316L Stainless Steel. This lab mixer blade has a low shear, high top to bottom pumping capacity.

1.5" Radial Flow Lab Impeller w/ 3/8" Bore
The Radial flow turbine creates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow of this stainless-steel radial blade impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.Mixer Direct's Lab Radial Flow Turbine features a 1.5" blade, a 3/8" bore, and a hub with set screw attachment for easy blade installment.

1/2" Bore Bolt-on Hub
Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1/2" bore and a 1.5" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1/2" Bore Weld-on Hub
Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1/2" and an OD of 1.5".

1/4" Bore Bolt-on Hub
Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 1/4" bore and a 1" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

1/4" Bore Weld-on Hub
Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 1/4" and an OD of 1".

10" Anchor Paddle w/ 36" Shaft
Mixer Direct's Lab Anchor is designed for use in a laboratory setting. The 316SS Anchor comes complete with 10" Impeller welded to a 36" x 3/8" Shaft and provides high shear. The industrial paddle mixer is perfect for low speed and high viscosity mixing and creates tangential flow within a container.

12" Blade Adapter Shaft
Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct's turned and threaded 3/8" threaded shaft adapter allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This 3/8" blade adapter shaft is 12" long with a 1/4" threaded portion and comes with a hex nut and washer for easy installation.

15" Blade Adapter Shaft
Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct’s turned and threaded 3/8” shaft allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This 3/8" blade adapter shaft is 15" long with a 1/4" threaded portion and comes with a hex nut and washer for easy installation.

18" Blade Adapter Shaft
Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct’s turned and threaded 3/8” shaft allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This 3/8" blade adapter shaft is 18" long with a 1/4" threaded portion and comes with a hex nut and washer for easy installation.

2" Anchor Paddle w/ 16" Shaft
Mixer Direct's Lab Anchor is designed for use in a laboratory setting. The 316SS Anchor comes complete with 2" Impeller welded to a 16" x 5/16" Shaft and provides high shear. The mixer paddle attachment is perfect for low speed and high viscosity mixing and creates tangential flow within a container.

2" Axial Flow Turbine Impeller with 3/8" Bore
316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this axial mixing blade allows a mixer to the break up agglomeration and impart solids effectively. These axial mixing blades will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 2" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

2" Bore Bolt-on Hub
Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 2" bore and a 3.5" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

2" Bore Weld-on Hub
Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 2" and an OD of 3.5".

2" Lab Hydrofoil w/ 3/8" Bore
These impeller stirrer blades are made with 316L Stainless Steel. High pumping per horsepower. Low shear.

2" Lab Hydrofoil w/ 5/16" Bore
316L Stainless Steel. High pumping per horsepower. Low shear stainless-steel rotor.

2" Lab Propeller w/ 3/8" Bore
316L Stainless Steel lab mixing blade. Low shear, high top to bottom pumping capacity.

2" Lab Propeller w/ 5/16" Bore
This agitator impeller blade is made with 316L stainless steel. Low shear, high top to bottom pumping capacity.

2" Radial Flow Lab Impeller w/ 3/8" Bore
The Radial flow turbine creates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow of this stainless-steel turbine impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers. Mixer Direct's Lab Radial Flow, Stainless-Steel Turbine features a 2" blade, a 3/8" bore, and a hub with set screw attachment for easy blade installment.

2.5" Axial Flow Turbine w/ 3/8" Bore
316 SS. The axial flow turbine is a classic medium shear impeller. Very effective in both low viscosity and high, this radial flow turbine allows a mixer to the break up agglomeration and impart solids effectively. They will draw more power per volume than the propellers or hydrofoils as motor power is converted to shear energy. Mixer Direct's Lab Axial Flow Turbine features a 2.5" blade, a 3/8 bore, and a hub with set screw attachment for easy blade installment.

2.5" Bore Bolt-on Hub
Bolt-on Hubs fasten to high shear dispersion blades using bolts threaded into blind tapped holes. The bolt-on hubs are secured to the shaft using set screws simplifying customization and blade replacement. The bolt hub has a 2.5" bore and a 4.25" OD. Mixer Direct’s bolt-on hubs allow continuous upgrading and diversification of high shear dispersion blades and can be used in conjunction with our stiffening plates for increased blade life.

2.5" Bore Weld-on Hub
Weld-on Hubs fasten to high shear dispersion blades using tack welding. This economical design creates a strong and durable blade assembly. Weld-on hubs are secured to the shaft using set screws simplifying customization and replacement. The weld-on hub has a bore size of 2.5" and an OD of 4.25".

2.5" Folding Lab Impeller with 5/16" x 16" Shaft
Designed to fit into beakers and flasks with narrow necks, Mixer Direct's Folding Lab Impeller is the perfect impeller for your laboratory. In the folded position these impellers have a diameter of less than 5/8" allowing them to fit inside your 24/40 joints. When rotated centrifugal force raises the impellers which open with an outside diameter of 2.5" and create radial flow. Made from corrosion resistant 316SS these impellers give you the mixing you require in those narrow necked laboratory vessels.

2.5" Lab Hydrofoil w/ 3/8" Bore
This heavy-duty rotor is made with 316L stainless steel. High pumping per horsepower. Low shear.

2.5" Lab Hydrofoil w/ 5/16" Bore
316L Stainless Steel Hydrofoil. High pumping per horsepower. Low shear.

2.5" Radial Flow Lab Impeller w/ 3/8" Bore
The Radial flow turbine creates a radial flow pattern moving away from the impeller, towards the sides of the vessel. The flow impacts the side and moves in either an upward or downward direction to fill the top and bottom of the impeller and be ejected once more. Some applications benefit greatly from this type of action, namely gas dispersion. Radial flow turbines have a high horsepower draw relative to axial flow turbines and other axial flow impellers.Mixer Direct's Lab Radial Flow Turbine features a 2.5" blade, a 3/8" bore, and a hub with set screw attachment for easy blade installment.

24" Blade Adapter Shaft
Blade Adapter Shafts enable a high shear dispersion blade to be attached with a simple hex nut and lock washer combination. Mixer Direct's turned and threaded 3/8" shaft allows blades to be securely attached to the shaft and eliminates the need for a hub on smaller high shear dispersion blades. This 3/8" blade adapter shaft is 24" long with a 1/4" threaded portion and comes with a hex nut and washer for easy installation.

3 Blade Propeller, LH, Sq, 10" Dia, 1 1/4" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 10" Dia, 1" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 10" Dia, 1/2" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 10" Dia, 3/4" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 10" Dia, 5/8" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 11" Dia, 1 1/4" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 11" Dia, 1" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 11" Dia, 3/4" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 12" Dia, 1 1/4" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 12" Dia, 1 1/8" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 12" Dia, 1" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.

3 Blade Propeller, LH, Sq, 12" Dia, 3/4" Bore
The 3 bladed stainless square pitch impeller is the staple impeller for many mixing processes due to its efficiency and durability. Mixer Direct’s propellers are solid 316L for maximum corrosion resistance in most environments. Being left handed, they will pump in a downward direction when rotating clockwise. Almost every process industry utilizes this product in some capacity, from chemical and coatings, to pharmaceutical and construction.